sawmill Equipment For Sale

The seller of this Pneumafil dust collection system has confirmed that it is in great working/running condition and ready to be loaded! - 150HP - Round duct enters the colletor at 48" diameter

Used but reconditioned Pneumafil Corp. reverse air bag house, sizes range from 12,000 CFM up to approximately 60,000 CFM. Reconditioning includes new paint, new filter bags, rebuilt interior components. Call for pricing.

PNEUMAFIL 13.5-460-8 Reverse Air Dust Collector System;Reverse Air Dust Collector with 42,600CFM at 9 to 1 air cloth ratio, 4,738 square feet of filter area. -- 13-1/2' Dia. round baghouse contains (460) bags - 96" long by 5" dia. filter bags in galvanized cages w/reverse jet bag cleaning. -- Reverse Air from 15 HP blower motor which cycles once a minute over filter bags (rotating plenum covers each row of bags once a minute, reversing the normal air flow direction. -- Reverse Air action back flushes the bags and dislodges wood dust particles collected on the filter media which then fall to the bottom of the 60° funnel hopper for removal), bags are changed via walk-in door.. -- Material handling fan with approx. 48" inlet dia with 150 HP floor mounted motor (covered in a shed); 0.25 HP explosion proof motor for manifold drive. -- Rotary Air Lock, gearmotor driven at the bottom of the hopper feeding and shared horizontal screw type auger (if you want it) with gearmotor drive. -- Features: MOTOTRONICS Soft Start for main motor. FIRETEK Spark Detection System (subject to prior sale with adjacent unit). -- Includes: Explosion doors, sprinkler pipe, interior electrical control panel, support frame, safety ladder, railings, and exterior ductwork.Professional dismantling, rigging, transport and installation is available.NOTE: Unit being sold under this record is pictured on the left side on the first two photos. For the smaller diameter unit on the right side (DIXIE AIR) see record "DO-011266".

Pneumafil MDL 11.6 Dust Collector S/N 13418

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

Pnuematic Systems Inc Electric Drum & Drive

Porter Cable 5HP Single Phase Compressor.

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Powerfist 1HP Dust Collector

POWERMATIC PF-41 4-Roll Power FeederFeatures: -- Cast Iron construction. -- Continuous duty motors transfer power from the gearbox to the feed rollers. -- Moveable universal joints and locking mechanisms lock the feeder in horizontal, vertical, or angle feed positions. -- Roller chain and sprocket design provide positive feeding for all types of materials. -- Rollers can be changed out easily and quickly; Smart roller system allows for the tires to be replaces without replacing the assembly. -- Solid cast iron construction of body pieces and base. -- The support column is fully adjustable for horizontal, vertical or angled feeder position. -- Universal joints provide stability for vibration-free feedingSpecifications: -- Swing 360°. -- Motor Power 1 HP. -- (4) Feed speed rates at 13 / 36 / 43 / 108. -- Max. Height of Rollers Parallel to Tabletop 8-1/2".

POWERMATIC Turbo Cone Dust Collector with Twin Canister Filter Kit;Complete with the following features: -- 3 HP 3 PH Material Fan, -- Generates 1,782 CFM. -- Ships from Oregon Coastal region.

(4) Precision Products 14M Chop Saw s/n's: 1839, 1841, 14-1325, 1878

(7) Precision Up Cut Saws 14M

Precision P748H rosserhead debarker, 32’, 3 7/16" shaft, S/N D-577, debarker will debark logs up to 30’, includes (6) strand infeed deck w/ hydraulic motor/drive, includes Precision 65'barn sweep w/ incline, (ref #181) Call Rachel for more information 931-797-6284

58" Precision T/D 200 HP

Precision 58" 6 K Chipper. No Infeed Mouth

Precision 58" 6 Knife Chipper w/Horizontal Feed Top Discharge S/N 3135

Heavy duty PRECISION rosser head type debarker model 848H with 7 sets of bull wheels, overall length approximately 45’, operator’s cab with controls, 4 7/16” bull wheel shafts, head included but not mounted on machine, heavy duty model with 12” I-beam frame and includes barn sweep in the bottom of the debarker. Hydraulic system and bull wheel drive is powered by a 25HP electric motor. Price as is/where is with no warranties or guaranties……Price $23,000.00 OBO.   As is where is $23,000.

Precision 66" 6 Knife Chipper