Description:

MAKOR 'LP-8' Profile Sander. Feed Trough(8) Sanding stations, 7-7/8" max. width & 3-1/8" thickness cap.; -- (2) triangular belt design sanding heads, independently mounted columns, each with 4 HP motor, -- Variable speed from 100 - 2,750 RPM; approx. tilting range 120°. -- Feed Drive: 4 HP Gearbox feed drive; feed speeds from 23 - 115 FPM, -- Segmented rough top rubber belt feed, approx (8) sections, and adjustable rubber wheel hold downs; Lineshaft drive under the length machine with right-angle take-off to each belt segment. -- (6) Sanding Wheels:: Abrasive wheel/Disc-type sanding heads each with 4 HP motor dual speed for 700 or 1,400 RPM arbor, 8" max. approx. abrasive wheel dia.; units are independently mounted on their own columns.Heads Configuration: -- Head 1: Right Side, 6"; sanding belt, electrically positioned up/down, in/out, tilt. -- Head 2: Right Side, 6"; sanding belt, electrically positioned up/down, in/out, tilt. -- Head 3: Left Side, 6"; sanding belt, electrically positioned up/down, in/out, tilt. -- Head 4: Left / Top / Bottom, Rotary sanding head, approx. 4.5"; shaft length. -- Head 5: Right / Top / Bottom, Rotary sanding head, approx. 4.5"; shaft length. -- Head 6: Right Rotary sanding head, approx. 4.5"; shaft length. -- Head 7: Left Rotary sanding head, approx 4.5"; shaft length. -- Head 8: Left / Top / Bottom, Rotary sanding head, approx 9"; shaft length. -- Heads 6 and 7 are directly opposing, can be Left and Right , Features: -- Tilt Adjustments: Universal movement of horizontal, vertical and tilt adjustment with wheels #1 - #3 & #4 at approx. +/-75° from vertical top to horizontal, wheel #2 (bottom wheel) with -15° to + 45° from bottom vertical. -- Wheel #5 is universal with a 360° tilt rotation. -- Heads 4 - 8 have automatic wear compensation. -- Position & degree adjustments dovetail slides by hand wheel with digital indicators.Complete with: -- 8" Wide abrasive belt capacity, belt oscillation on/off, interchangeable profile pads & electronically timed/programmable movement of pad, pneumatic belt tension, pneumatic blowers for cleaning & cooling of belts. -- Main electrical cabinet with controls, PLC controller & manual override with individual buttons, Operator/Parts/PLC manual and elect drawing are included.