Description:

BUSELLATO JET OPTIMA RT21XL FLAT TABLE MACHINE (W/LOADING, UNLOADING): -- Specifications: 4' x 12' "MATRIX" Phenolic Flat Table design for "Nested Base" Manufacturing. -- Working cap.: "X" Axis is 145.1" (3,686 mm), "Y" axis is 49.2" (1,244 mm), "Z" axis stroke is 11.8" (300 mm); max. material thickness is 5.1" (130 mm). -- Positioning speed:"X" & "Y" axis at 197 FPM (60 MPM), "Z" axis is 49 FPM (15 MPM). -- Worktable:"RAKE" sweeping system with an automatic loading/unloading device; staging table & dust extraction system that gives you the total material handling solution with a complete cycle time of under (30) Seconds. -- (2) Independent working areas with locating stop pins on the front & rear LH & RH sides for positioning parts on the worktable; prepared for (optional) elevated pods that allow profile & horizontal machining. -- Boring Unit:4 HP (3 kW) motor - 4,000 RPM; (32) Independent vertical spindles, (20) spindles in "X" axis & (12) spindles in "Y" axis. -- Machining:(1) 15 HP (11 kW) Vertically mounted electro-spindle router with HSK F63 adaptor, inverter driven 1,000 - 24,000 RPM with max. torque from 12,000 RPM; -- (1) 8-position automatic tool changer mounted to the "Y" axis beam. -- Operator Interface:PC Front end with "TRUE PC" + Windows operating system; 15" TFT monitor, full keyboard & mouse; 1.44 MB & CD ROM drives. (4) serial ports, (1) parallel port, and (2) USB ports. -- The new Optima series can import all old CNC90, Winner90 or Genesis programs. The latest version of Autolink will export to any of the previously mentioned versions of Busellato software as well as Genesis Evolution. programs can be transferred via diskette or downloading by wire is possible; all built-in to an air-conditioned control cabinet for constant temperature & dust-free environment. -- Complete With:30hp Kaser vacuum pump, Emergency stop rope, Automatic "forced" lubrication system for guides & ball screw, Additional locating pins, Protective head enclosure with debris curtain around bottom edge, handheld operator control pendant. -- Options Include:BUSELLATO's NC controlled "Linear Flow Load/ Unload Panel System"; all aspects of the loading/unloading process are automatic. Auto-load portion of the machine does not need to be installed if there is not enough floor space for it. -- Seller States:This machine has very low hours compared to a 40hr work week. 40hr x 52 weeks x 11 years = 22,880 hrs. As of a couple of months ago this machine only has a combined total of 5,100hr of standby and actual machining time, that's only 2.5 years of full-time use. See photo for hours. -- Actual Model is BUSELLATO JET OPTIMA RT21XL.