Description:

SNX nVISION C 1.5 CONTOUR EDGEBANDER: -- Specifications The "nVision C1.5" Curved (Contour) Edgebander allows 360° edgebanding to contoured (shaped) panels. The Standard banding machine includes banding and trimming stations with: (1) Set of cutting tools; (1) articulated vacuum arm; edgeband coil stand; (1) 8″ aluminum vacuum pod. - Includes: On-site installation and training; free phone support; operation manual; 1-year limited warranty.The machine uses: Standard EVA hot melt glue and can apply 0.5 mm - 3 mm thick edgebanding.Edgebanding is applied automatically as the part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation: Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The "nVision C 1.5" can band minimum material size: 150 mm (6") Diameter.Max. material size: 2,400 x 2,400 mm (94" x 94"); max. material weight: up to 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); Banding thickness from: 0.5 mm thin tape w/low temp. adhesive: 3 mm Tape. -- Radii CapacityMin. internal (inside) radius: 11.1 mm (0.4375 - 7/16"); mini. external (outside) radius: 30 mm (1.18") Based on 1 mm thick edge tape. IMPORTANT: ALL min. & max. radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape: Semi or rigid.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area.Equipped with:Thermal-regulated glue pot heated via (1) 800 Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece, automatic guillotine for coiled material 0.5 mm - 3 mm (0.02" - 0.11") thickness & 57 mm height (2-1/4"). Operator Interface -- Faster processor and a more accurate encoder for more consistent tight butt joints; 15"; touchscreen monitor; training & maintenance videos on PC; connect to the Internet for service and updates; more user-friendly interface. - Bar code capable (optional).The 15"; touchscreen monitor provides an intuitive control panel, while features like training and maintenance videos make it easier than ever to maintain and operate the machine. The optional bar code capability allows for seamless integration into modern production workflows, reducing the potential for operator errors.Features -- Tape height guide; aluminum infeed guides; solid shoe holder; adjustable pod height spindle; digital readouts; pneumatic enclosure; laser upgrade.The new PLC interface enhances usability, while the machine is capable of edgebanding and trimming an inside radius as small as 7/16″. It features 18,000 RPM ER20 collet-type spindles (top/bottom), and the same proven articulating vacuum support arm. The "nVision C1.5" can band and trim open-ended parts up to 8