• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
19 Results Found for Band Resaw Viewing 1 - 19 of 19 results

Circular-Saws

Band-Saw-Blades-Wide

Wear-Parts

Tools

Chipper-Parts

Wear-Parts

Chainsaw

Mechanical-Harvesters

Marking-and-Tally
Find More Supplies
STANDARD LISTINGS
Baker 4 Head Band Resaw with Return
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
2004 Baker Single Head Resaw with complete run around system. 65 HP Deutz Diesel Engine. 12" X 12" Capacity. Runs daily.
Equipment Location:Frankfort, KY
Sawmill Exchange
713-729-6455

Baker Band Resaw

$175,000
SHOW DEMO - IN STOCK AND READY TO GO!! BAKER 20' BP DOMINATOR BAND SAWMILL WITH HYDRAULIC CONTROLS MOUNTED ON A CONTROL STAND, 50HP TEFC MOTOR, COMPUTER SET WORKS, ELECTRICAL PANEL COMPLETE WITH STARTERS, MOTOR OVERLOAD PROTECTION, NEMA 12 ENCLOSURES. PREIRED 15HP HYDRAULIC POWER UNIT, 1 1/2" BAND WIDTH, THREE FENCE ARMS, THREE TOE ROLLERS, INLINE DEBARKER. TWO LOG CLAMPS. ONE (1)CHAIN STYLE LOG TURNER, PRECISION BALL SCREW HEAD RAISE AND LOWER, DUAL CHAIN CARRIAGE DRIVE, BOARD DRAG BACK RETURN, BUILT IN MATERIAL REMOVAL CONVEYOR, VARIABLE FEED CONTROL, 36" DIAMETER PRECISION MACHINED BAND WHEELS, BLADE LUBRICATION DRIP TANK, HYDRAULIC BLADE TENSIONING, LASER LIGHT. INCLUDED CONTROL CAB WITH HEAT AND AIR CONDITIONING BAKER 3 STRAND LOG IN FEED DECK WITH PAC MAN LOADER ARMS BAKER STATIONARY BOARD EDGER WITH 15HP MOTOR WITH TAILING BELT BAKER REVERSE EDGER SYSTEM - POWERED ROLLER WITH FLIPPER AND KICKER, ACCUMULATION CONVEYOR, TIP TABLE AND RETURN CONVEYOR BELT. 2 EACH - SLAB RACK 2 EACH - LUMBER RACK
Equipment Location:Ellington, MO
Baker Products
573-663-7711

Baker Band Resaw

Call for Price
Call us today for more information on this Baker Model C 4 Head Resaw
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131

Baker Band Resaw

Call for Price
Call us today for more information on this Baker 3 Head Resaw
Equipment Location:West Plains, MO
Global Machinery Sales LLC
417-256-8131

Baker BBR-0 Band Resaw

Call for Price
Baker BBR-0 Band Resaw With return belt Very good condition
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
Baker Model AX Band Resaw 2000 Under 1000 hours Gas Powered, 24 HP Onan engine Hydraulic belt in-feed and return Hydraulic powered hold down and hold over Capacity 8" x 12" cant, any length with supports Produces smooth and accurate cuts From 1/4" to 6" thick to 12" wide
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
USED BAKER FIVE HEAD C MODEL BAND RESAW RETURN CONVEYOR 36" BANK WHEELS 30HP MOTORS COMPLETELY REFURBISHED
Equipment Location:Ellington, MO
Baker Products
573-663-7711
RECONDITIONED BAKER "B MODEL" RESAW WITH A 20HP MOTOR RETURN CONVEYOR AVAILABLE FOR ADDITIONAL FEE
Equipment Location:Ellington, MO
Baker Products
573-663-7711
USED BAKER "C" MODEL 4-HEAD BAND RESAW WITH 20HP. MOTORS & HOLD DOWNS, Refurbished
Equipment Location:Ellington, MO
Baker Products
573-663-7711
Used Baker 3 Head C Model Band Resaw Lightly Refurbished Runs Great 575V No Return Can be changed to other electrical voltages for additional charge
Equipment Location:Ellington, MO
Baker Products
573-663-7711
BAKER A Bandsaw Horizontal Resaw -- Single Head Re-Saw, 20 HP TEFC motor, 6" wide x 12" high material capacity or 8" wide x 4" high above the blade with conveyor set a 0ΓΈ. -- Equipped with: Spring infeed holddown, variable speed controlled by a hydraulic flow control valve, tilting conveyor, hydraulic feed drive via a 2 HP pump motor and 28" steel bandwheels, BAKER'S exclusive low profile flat plate guide system w/rear rollers. Blade dimension 1-1/4".
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BAKER "DX" Model Thin Kerf Horizontal Resaw with a resawing capacity of 16" x 16". -- Saw is driven by a 40 HP motor; with 10 HP feed motor from 10 - 60 FPM, variable speed controller. -- Dynamically balanced CNC machined solid steel wheels, 36" diameter. Powered steel wide holddown rollers over belted 16" wide infeed belt. -- Hydraulically powered feed works driven by 10 HP unit with flow control valve and stop start controls. -- Band blade dimensions: 18'5" x 1-1/4" x 0.035 tensioned and supported by BAKER low profile flat guides with steel plates. Tensioning in conjunction with hydraulic unit. -- Includes: - 8 ' Extended Outfeed Conveyor and Frame Length. Note: Outfeed Conveyor is Removable and a Dantherm Model 750 Dust Collector with 7.5 HP motor and starter. 4500 CFM. 3 Bag discharge.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
BAKER Model BBR-O Single head equipped with: -- Separate 15 HP TEFC motor, hydraulic feed drive via a 2 HP pump motor, 0 - 90 FPM variable feed speed. -- Endless flat belt infeed w/floating overhead feed rollers, each is hydraulically powered; spring blade tensioning. -- 3/4" - 7" Cutting width, 1/4" - 7" cutting height, uses 0.035" x 1" x 13'-2" blade length; BAKER flat guides for higher production, accuracy & extended blade life. -- Includes: Return Conveyor.
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
Machine Number: 1643 Machine Type: Resaw Manufacturer: Baker Model #: Model A Location: Mid West Baker Model A Resaw Reconditioned Variable Speed Feed
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
Machine Number: 1691 Machine Type: Resaw Manufacturer: Baker Model #: Model C Baker 5 Head Resaw Model C Power Side Rollers Return
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
Baker BBRO Resaw 7" X 7" max 12" return conveyor with short stock device 15HP 230/460 volt 3 phase
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
BAKER BANG SAW WITH 2 40HP MOTORS, MAKES 4 CUTS AT ONCE
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Band Saw. This machine is a Baker 4-Head band saw. Item #C629
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232