EX-FACTORY INC.
EX-FACTORY INC.
 704-841-2001

Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!

Filtering

Reset All 

thru
 Used     New
Viewing Page 6 of 7
121 Results Found
Sort By 
EX-FACTORY-INC
 704-841-2001
2026 Weima HORIZONTAL BEAVER 300  Hogs and Wood Grinders
Call for Price

WEIMA Horizontal Beaver 300 Slow Speed, High Torque Waste Grinder w/Vibratory Conveyor. 25 HP (18.5 kW), 10" rotor diameter, 11.8" (300 mm) rotor length, (14) 40 x 40 mm indexable, concave cutters; 11.8" x 4" infeed opening. Equipped with: -- WRRL 300 12' Vibratory Conveyor (550 Lbs). -- The "Horizontal Beaver" receives the material from a vibratory conveyor system; from the conveyor, a feed roller system pinches and feeds the material into the rotor. -- Features: -- Patented "V-Rotor" design utilizes a V-groove rotor closely matched to grooves in the counter-knife; the V-Rotor produces uniform discharged material that is free of splinters and dedicates more horsepower to grinding. -- Includes: -- integrated "plug-and-play" electrical control system with UL approved components; -- Extraction requirements: 1,900 CFM (28 MPS), 8" (200 mm) diameter for dust collection. Total Approx. weight of 2,430 Lbs.

 704-841-2001

 Call
2026 Weima ZM 40  Hogs and Wood Grinders
Call for Price

WEIMA ZM-40 Quad Shaft 4-Shaft ShredderEquipped with: -- Dual drive motors - (2) 30 HP Drive motors. -- Hopper opening measures 51" x 55.1" (1,300 x 1,400 mm); cutting chamber opening of 30" x 27.6" (762 x 700 mm). -- Rotor length of 30" (762 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter. -- Complete with: -- Control Panel with soft start and 16' cable bundle. -- Note: "Quad Shaft" Shredders, unlike Dual Shaft Shredders, allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing screen. -- Machine weight: 5,500 Lbs.

 704-841-2001

 Call
2005 Weima WL 15/ 90 V- ROTOR  Hogs and Wood Grinders
$55,000

WEIMA WL 15/90 V-Rotor SINGLE SHAFT SHREDDER; high performance shredder. -- V-Rotor is a key feature of this machine. -- Hopper opening approx. 59" x 59". -- Auxillaries: Ram c/w 1 HP power rack unit. -- Almost 1 full set of blades will be provided. Note from the Seller: Last used 2 years ago and has been sitting around. Sold in a "As is condition". Machine can run but some repairs are in order (this is already considered in the pricing). It also comes with the electric cabinet, some lights need to be replaced but other than that fully operational. -- Loaded on your truck.

 704-841-2001

 Call
2018 Weima WL 4  Hogs and Wood Grinders
Call for Price

WEIMA - WL 4: Vertical Hopper Fed, Low Noise Grinder Specifications: -- 24" x 41" (600 mm - 800 mm) Hopper opening at the top; 0.8 cu./yds. (0.6 cu/m) capacity. -- 22.5 HP Motor; 10" (252 mm) dia. rotor; grinds at 60 - 100 RPM. -- Patented "V-Rotor" design utilizes: V-Groove rotor closely matched to grooves in the counter knife to ensure: Uniform discharge free of splinters; reduce friction; dedicate more horsepower to grinding. Complete with: -- (28) Replaceable back bolt-on cutter knives; welded knife holders; recessed concave cutters with: Low clearance over the rotor to extend cutter life; protect the bolts; and reduce machine wear. -- Hydraulic Ram (0.75 kW) optimizes feed pressure by: Monitoring rotor motor amperage; lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Includes: -- 8" Dia. chip collection outlet (1,900 CFM required); sizing screen (size TBD).

 704-841-2001

 Call
2002 Weima WLH 400  Hogs and Wood Grinders
Call for Price

WEIMA WLH 400 Horizontal Low-Speed Grinder with 13' Vibratory Infeed ConveyorEquipped with: -- 40 HP Rotor motor; 14.5" Dia. rotor with (22) 4-way indexable, replaceable cutter knives 40 mm X 40 mm, 1-piece counter bed knife, rotor/cutterhead grinding speed 500 - 600 RPM. -- Features: -- Top infeed roller, Heavy Duty Industrial Grade construction with stress-relieved shell and frame; Heavy Duty outboard roller bearings; separate electrical control panel with "soft start" starter. -- Complete with: -- 10" dia. collection outlet 3,000 CFM required. -- Includes: 13' long WEIMA Vibrating Infeed Conveyor. -- Grinding capacity of 900 to 1,500 lbs/hour. -- Actual model is WLH 400 ST.

 704-841-2001

 Call
2019 Weima WLK 10  Hogs and Wood Grinders
$57,750

WEIMA WLK 10 Vertical Hopper-Fed Low-Noise Grinder Equipped with: -- 39.4" x 47.2" Hopper opening at the top, 1.7 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 60 HP rotor motor, 14-1/2" dia. The patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 39.4" Long rotor operates at 60 - 120 RPM; equipped with (52) replaceable back bolt-on (4 x indexable) concave-shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. Features: -- WEIMA'S proprietary gearbox is designed specifically for slow-speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system.Also Included with the Grinder -- 1/2" screen -- Incline auger for discharge -- Blower for truck loading with all piping -- Complete control panel This unit has only 1200 hours on the clock Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL-approved components (system UL certification available upon request for an additional charge). -- Ground material output depends on screen hole size and material from 1,200-2,500 Lbs/Hr.; 3/4" holes are supplied standard screen hole size. Options: -- Flared hopper, material discharge auger; programmable logic controls, and ram comb.

 704-841-2001

 Call
2026 Weima WLK 10  Hogs and Wood Grinders
Call for Price

WEIMA WLK 10 Vertical Hopper-Fed Low-Noise Grinder Equipped with: -- 39.4" x 47.2" Hopper opening at the top, 1.7 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 60 HP rotor motor, 14-1/2" dia. The patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 39.4" Long rotor operates at 60 - 120 RPM; equipped with (52) replaceable back bolt-on (4 x indexable) concave-shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. Features: -- WEIMA'S proprietary gearbox is designed specifically for slow-speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL-approved components (system UL certification available upon request for an additional charge). -- Ground material output depends on screen hole size and material from 1,200-2,500 Lbs/Hr.; 3/4" holes are supplied standard screen hole size. Options: -- Flared hopper, material discharge auger; programmable logic controls, and ram comb.

 704-841-2001

 Call
2020 Weima WLK 10  Hogs and Wood Grinders
$79,500

WEIMA - WLK-10: Vertical Hopper-Fed Low-Noise Grinder 39.4" x 47.2" Hopper opening at the top (with hopper extension); 1.7 cu. yds. cap.; (3) sides straight with: Curved Front Wall.Specifications -- 60 HP Rotor motor; 14-1/2" dia. patented "V-ROTOR" design utilizes: V-Groove Rotor closely matched to grooves in the counter-knife; ensures uniform discharge free of: Splinters; reduces friction; dedicates more horsepower to grinding. -- 39.4" Long rotor operates at: 60 - 120 RPM; equipped with: (52) Replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders: Standard; recessed concave cutters with: Low clearance over the rotor extends: Cutter life; bolts protection; machine wear reduction. Features -- WEIMA'S Proprietary gearbox designed specifically for: Slow speed Grinders. -- 8" Dia. outlet for material discharge via: Auger; conveyor; pneumatic (1,900 CFM required for pneumatic conveying); screen size: TBD. -- 3 HP Hydraulic motor; hydraulic ram: Optimizes feed pressure by monitoring rotor motor amperage; lateral force on the ram: Minimized by a unique "U-Joint" mounting system.Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with: UL Approved components.(102) Total operating hours. 7' W x 10' L x 8'-4" T; 7,700 Lbs.

 704-841-2001

 Call
2005 Weima WLK 10  Hogs and Wood Grinders
$37,750

WEIMA WLK 10 Vertical Hopper-Fed Low-Noise Grinder 39.4" x 47.2" Hopper opening at the top (with hopper extension); 1.7 cu. yds. cap.; (3) sides straight with curved front wall.Specifications: -- 50 HP Rotor motor; 14-1/2" dia. patented "V-ROTOR" design utilizes 39.4" long rotor operates at: 60 - 120 RPM. -- Equipped with: -- (52) Replaceable back bolt-on (4 x indexable) concave shaped cutter knives; welded knife holders; recessed concave cutters with low clearance over the rotor extends: cutter life. Features: -- 8" Dia. outlet for material discharge (1,900 CFM required for pneumatic conveying); screen size: TBD. -- 3 HP Hydraulic motor; hydraulic ram: Optimizes feed pressure by monitoring rotor motor amperage; lateral force on the ram: Minimized by a unique "U-Joint" mounting system.Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with: UL Approved components.7' W x 10' L x 8'-4" T; 7,700 Lbs.

 704-841-2001

 Call
2026 Weima WLK 13  Hogs and Wood Grinders
Call for Price

WEIMA WLK 13 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 51" x 47" hopper opening (straight sided), 2 cu. yds. cap.; 368 mm (14.5") rotor dia. x 51.2" rotor length; 60 HP motor and hydraulic ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (68) welded knife holders, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear; drop out discharge, lift up door for easy purge cleaning when used in plastics application. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Features: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

 704-841-2001

 Call
2026 Weima WLK 15  Hogs and Wood Grinders
Call for Price

WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 59" x 59" rear-flared hopper opening; 3 cu. yds. cap.; 368 mm (14.5") rotor dia.; 120 HP motor; hydraulic ram with 4-sided serrated ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (82) Welded knives, (4) broaching cutters & (4) counter-knives, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- Drop out discharge, hydraulically actuated lift up door for easy purge cleaning; extended screen basket; cut-out for conveyor (not included); false wall; 3/8" - 4" screen available. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

 704-841-2001

 Call
2016 Weima WLK 25 SUPER JUMBO  Hogs and Wood Grinders
$135,000

WEIMA WLK-25 SJ Super JUMBO SINGLE SHAFT SHREDDER -- Feed opening 98" x 76" -- Rotor Diameter 27" -- (246) Cutters -- 215 HP

 704-841-2001

 Call
2026 Weima WLK 4  Hogs and Wood Grinders
Call for Price

WEIMA WLK 4 Vertical Hopper-Fed, Low-Noise GrinderSpecifications: -- 31-1/2" x 39" Hopper opening at the top, 1.1 cu. yds. cap. Features: -- 30 HP rotor motor, Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. Equipped with: -- (14) Replaceable back bolt-on cutter knives, welded knife holders standard, recessed concave cutters with low clearance over the 10" dia. rotor extends cutter life, protects the bolts, and reduces machine wear. -- 6" Dia. dust collection outlet (1,200 CFM required); 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content); -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, the lateral force on the ram is minimized by a unique "U-Joint" mounting system. Includes: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for an additional charge). Options: -- Flared hopper, log Spacer, 2nd row of knives, material discharge auger; programmable logic controls;

 704-841-2001

 Call
2026 Weima WLK 6  Hogs and Wood Grinders
Call for Price

WEIMA WLK-6 Vertical Hopper-Fed Low-Noise Waste GrinderEquipped with: -- 31-1/2" x 49" hopper opening at the top, 1.2 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 30 HP rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 31-1/2" Long rotor operates at 80 - 120 RPM; equipped with (42) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- WEIMA's proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Material output from 1,000 - 1,250 Lbs/Hr (output is an average and can be influenced by density, material size, screen size, feeding form, and other); 1" standard screen hole size. -- Includes: -- A/B Programmable Logic Controller. -- Options: -- Flared hopper, material discharge auger.

 704-841-2001

 Call
2019 Weima WLK 6  Hogs and Wood Grinders
$52,500

WEIMA - WLK-6: Vertical Hopper-Fed Low Noise Waste Grinder with Inclined Conveyor & Dust SystemEquipped with: -- 31-1/2" x 49" Hopper opening at the top; 1.2 cu./yds. cap.; (3) sides straight with: Curved Front Wall. -- 30 HP Rotor motor; 10" dia. patented "V-Rotor" design; utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of: Splinters; reduced friction; dedicated more horsepower to grinding. -- 31-1/2" Long rotor operates at: 80 - 120 RPM; equipped with: (42) Replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with: Low clearance over the rotor extended cutter life; protects the bolts; reduced machine wear. -- Features -- WEIMA's Proprietary gearbox design specifically for: Slow speed Grinders. -- 8" Dia. outlet for: Material discharge (1,900 CFM; required for pneumatic conveying); screen size: TBD. -- Hydraulic ram. Optimizes feed pressure by monitoring rotor motor amperage; lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: -- Heavy-Duty structural steel frame; welded construction; integrated "plug-and-play" electrical control system with: UL Approved components (system UL certification available upon request for additional charge). -- Material output from: 1,000 - 1,250 Lbs/Hr (output is an average and can be influenced by: Density; material size; screen size; feeding form; and other). -- Includes -- A/B Programmable Logic Controller; hopper extension with: Lid & curtains; 18" wide x 206" long Inclined Feed Conveyor; 5 HP Dust System.

 704-841-2001

 Call
2026 Weima WLK 8  Hogs and Wood Grinders
$72,400

WEIMA WLK 8 Vertical Hopper-fed Low-noise GrinderSpecifications: -- 39" x 49" Hopper opening at the top, 1.75 cu. yds. cap.; (3) sides straight with curved back wall. -- 35 HP (27 kW) rotor motor, 10" dia. patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Equipped with: --39.4" Long rotor operating at 80 - 120 RPM; with (54) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- WEIMA'S proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Options: -- Flared hopper, material discharge auger; programmable logic controls and ram comb.

 704-841-2001

 Call
2006 Weima WLK 8  Hogs and Wood Grinders
$34,900

WEIMA - WLK 8: Vertical Hopper-fed Low-Noise GrinderSpecifications -- 39" x 49" Hopper opening at the top; 1.75 cu. yds. cap.; (3) sides straight with: Curved back wall. -- 40 HP Rotor motor; 10" dia. patented "V-ROTOR" design; utilizes V-groove rotor, closely matched to grooves in the counterknife to ensure uniform discharge free of splinters; reduce friction; dedicate more horsepower to grinding. -- Equipped with: -- 39.4" Long rotor; operating at 80 - 120 RPM; (54) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with: Low clearance over the rotor extend cutter life; protect the bolts; reduce machine wear. -- Features -- WEIMA'S proprietary gearbox designed specifically for: Slow speed grinders. -- 8" Dia. outlet for material discharge. -- Hydraulic ramo ptimizes feed pressure by: Monitoring rotor motor amperage; lateral force on the ram is minimized by: Unique "U-Joint" mounting system. -- Complete with: -- Heavy-Duty structural steel frame; welded construction; integrated "plug-and-play" electrical control system with: UL Approved components.

 704-841-2001

 Call
2026 Weima WOODCHUCK  Hogs and Wood Grinders
Call for Price

WEIMA Woodchuck Low Noise Slow Speed Vertical Wood Waste Grinder:A low cost/investment solution for Woodwaste disposal - feasible for a small shop.Specifications: -- 25 HP Main Drive motor; 24" x 41" hopper opening, 0.74 cu. yds cap; 10" dia. rotor, 100 RPM. -- Equipped with: -- (28) 40 mm x 40 mm Concave, indexable cutters; 6" discharge outlet. -- Features: -- Patented V-ROTOR design utilizes tooling closely matched to grooves in the counter-knife. -- V-ROTOR Produces uniform discharged material, free of splinters and dedicates more horsepower to grinding. -- Includes: -- 5/8" or 3/4" screen (TBD); Integrated "plug-and-play" electrical control system with UL approved components; 1-Year warranty, operations and parts manuals. .

 704-841-2001

 Call
1998 Weinig R 934  Knife Grinder
$7,900

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

 704-841-2001

 Call
2003 Weinig R 960  Knife Grinder
$19,350

WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity).Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump. Includes: -- 1-13/16" arbor

 704-841-2001

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved