4' x 6' Table Hand controller ____ capacity

64 ft long 33.5 inch wide 30 in rollers

This wood was all removed from an old mill on South Carolina. It is ready to be loaded out.

Brand new hardwood deck All lights work New airbags, studs, lug nuts New air suspension

The seller has confirmed that this Unscrambler deck is in good working/running condition. It is ready to load! - Unscrambler deck - (8) chains

This unit was blowing dust to a large baghouse in a large facility. There is also a 75 HP blower and baghouse available at the same location. Piping is available. Unit will be loaded on the truck.

This plant was set up as a test site for a an oil company that was using steam to extrude oil from the ground. The equipment needs to be moved, as the land it is on has changed owners. Basic listing information: Biomass plant dries wood (and other fuels) and feeds a burner to make steam. Fuels include: Wood, crops, manure and straw. The unit claims to have 80% efficiency. System consists of fuel receiving, handling, preparation biomass to steam energy conversion and all material handling equipment. Basic equipment list: - Fuel receiving: West Salem (WSM) unloader and conveyor - Screening/Separation: WSM Metal Detector, Eriez 18" Magnet, BMM 3'x8' double screen, WSM 100 HP Grinder, Kice Baghouse - Wet Fuel Feed: WSM fuel bin, metering bin, drag chain, feed diverter - Heat System: Dryer meter screw conveyor, rotary airlock, feed screw conveyor, 12' x 48' single pass dryer, inorganic separator - Fuel separation cyclone with magnet, dryer fan, dryer baghouse, rotary airlock, baghouse cleaning fan - Dry fuel storage bin, agitator, rotary air lock, screw conveyor, belt feeder, baghouse - Gas burner 25 MM BTU, FGR fan, fuel conveying air fan

44 ft. long x 96 in. wide variable speed belt conveyor, 2HP 480V electric motor Belt is approximately 90" wide

4 banks of 15 fans as pictured

Edger with power takeoff

Chain deck 5 HP hydraulic power pack

Blower with Century 7-1/2 HP motor 208/239/460 volt 3-phase

Grapple attachment as pictured

Liebherr L 564 Loader as pictured

Liebherr L 564 Loader as pictured

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

JLG 1930 ES New Batteries Working height7.72 mPlatform length0.76 m Platform width1.87 mTransport length1.87 m Transport width0.76 m Transport height1.52 m Weight1550 kgNet load230 kg Persons2 Travel speed 4.8 km/h Turning radius outside1.75 mmax. climbing ability25 % Platform extension0,9 m Power sourceEEngine manuf.Kohler Engine typeKDI 2504Engine power48 kWMax. torque305/1500 NmNo. of cylinders4

JLG 1930 ES New Batteries Working height7.72 mPlatform length0.76 m Platform width1.87 mTransport length1.87 m Transport width0.76 m Transport height1.52 m Weight1550 kgNet load230 kg Persons2 Travel speed 4.8 km/h Turning radius outside1.75 mmax. climbing ability25 % Platform extension0,9 m Power sourceEEngine manuf.Kohler Engine typeKDI 2504Engine power48 kWMax. torque305/1500 NmNo. of cylinders4

Lumber tilt hoist that is ready to be shipped. Specs and dimensions coming!