Table Configuration: • KOMO VR 512 Mach I CNC Router • 60 x 144" Cast aluminum machined vacuum table • Table has been designed for High Flow vacuum pump • Ideal for nested based manufacturing • Heavy Duty fixed Gantry Bridge • A-Frame style Gantry Support legs • Pop up part locating pins (set of three pins) Head Configuration: • 12 HP High Frequency 4-pole Router Spindle • Programmable spindle speeds from 9,000 - 18,000 RPM • 8-Position Dynamic tool changer with BT-30 tool holders • (6) Vertical drill spindles on 32 mm centers • (4) Horizontal boring spindles with 1 + 1opposing in the X-axis and 1 + 1opposing in the Y-axis Positioning: • All axes are positioned by AC Servo Drives • Heavy Duty Profiled machine rails and bearing trucks • Preloaded precision ball screws for positioning • Automatic Lubrication system to all bearings • Rapid travel speeds of 1,250 IPM on both the X and Y-axes • Travel speeds of 600 IPM on the Z-axis Controller: • FANUC 210i PC Front end Controller • Windows Operating system • RS-232 Serial interface • 3-axis simultaneous control • Feed rate override • Spindle speed override • Hand help pendant • Remote operating pedestal with vacuum and cycle start buttons, pop up pins, as well as emergency stop.

Komo VR508 CNC Router 60" x 120" Table 25 HP Sullair Vacuum Pump Dust Collector (10 or 15 HP - need to confirm) (2) Two main router heads with Quick Change (2) Vertical Drill Units (1) 8 HP 10" Saw Fanuc Control

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump

Krusi Krusimatic G2 Log Milling Machine - Capable of milling dovetails, lap joints, joinery, end cuts, key cuts and drill holes - Fully automated - Still installed and available for inspection

Kuka KR60-3 Robot System KR C4 Control System Kuka Programming Smart Pad Robot Enclosure (3) Heave duty conveyor racks

Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

LM Bump Rollcase Package Saw

LM Package Saw Gas Engine Rollers

Viking Model 304C Pallet Nail Specs (to be confirmed): - Produces upwards of 500 pallets/Shift - Single Operator Machine - 3 Stringer Standard - 60" Standard Stringer Length - Automated Pallet Turnover - Automated Stacking - Hydraulic Nailing - Newer PLC and Display ( 22K Upgrade )

Viking Model 304C Pallet Nail Specs (to be confirmed): - Produces upwards of 500 pallets/Shift - Single Operator Machine - 3 Stringer Standard - 60" Standard Stringer Length - Automated Pallet Turnover - Automated Stacking - Hydraulic Nailing - Newer PLC and Display ( 22K Upgrade )

Lumber tilt hoist that is ready to be shipped. Specs and dimensions coming!

• 1 CROSS SANDING -- BELT DIM 6,600MM X150MM • SANDING SPEEDS 12 and 24 M /sec. • DRIVE POWER 15KW. • 3 LONGITUDINAL SANDING BELTS UNITS • BELT DIM----- 3250MM X 1650MM • SANDING SPEED 10 and 20 M /sec • DRIVE POWER 15KW PRESSURE BEAM WITH COMPUTER CONTROLLED SELECTIVE PRESSURE REGULATION SYSTEM. WITH INFINITE PRESSURE MATCHING OF INDIVIDUAL PRESSURE ELEMENTS FOR OPTIONAL MULTI TRACK FEEDING. 16MM CONTROL ROLLER SPACING , WORK PIECE TOLERANCE COMPENSATION UP TO A MIN. OF 2MM. THE CORRECT POINT IN TIME FOR THE DEPLOYMENT OF THE PRESSURE BARS IS DETERMINED AUTOMATICALLY BY AN ELECTRONIC LINE CONTROL IN DEPENDENCE OF THE FEED SPEED. Air dryer BRUSH CLEANING "EA2" UNIT CENTRALLY ADJUSTABLE IN HEIGHT INCLUDING EXHAUST HOOD AND PRESS ON ROLL. • DIAMETER----------------------------------------------- 220MM • DRIVE POWER---------------------------------------- 2.2KW • BRISTLE TRIMMING -------------------------------- FIBRE • VOLTS---------------------------------------------------- 400V-- 50 C/S

• 1 CROSS SANDING -- BELT DIM 6,600MM X150MM • SANDING SPEEDS 12 and 24 M /sec. • DRIVE POWER 15KW. • 3 LONGITUDINAL SANDING BELTS UNITS • BELT DIM----- 3250MM X 1650MM • SANDING SPEED 10 and 20 M /sec • DRIVE POWER 15KW PRESSURE BEAM WITH COMPUTER CONTROLLED SELECTIVE PRESSURE REGULATION SYSTEM. WITH INFINITE PRESSURE MATCHING OF INDIVIDUAL PRESSURE ELEMENTS FOR OPTIONAL MULTI TRACK FEEDING. 16MM CONTROL ROLLER SPACING , WORK PIECE TOLERANCE COMPENSATION UP TO A MIN. OF 2MM. THE CORRECT POINT IN TIME FOR THE DEPLOYMENT OF THE PRESSURE BARS IS DETERMINED AUTOMATICALLY BY AN ELECTRONIC LINE CONTROL IN DEPENDENCE OF THE FEED SPEED. Air dryer BRUSH CLEANING "EA2" UNIT CENTRALLY ADJUSTABLE IN HEIGHT INCLUDING EXHAUST HOOD AND PRESS ON ROLL. • DIAMETER----------------------------------------------- 220MM • DRIVE POWER---------------------------------------- 2.2KW • BRISTLE TRIMMING -------------------------------- FIBRE • VOLTS---------------------------------------------------- 400V-- 50 C/S

Liebherr L 564 Loader as pictured

Liebherr L 564 Loader as pictured

Pallet Nailer - has not been run in 3-4 years

Pallet Bandsaw Dismantler 69" Capacity

The seller has confirmed that this Unscrambler deck is in good working/running condition. It is ready to load! - Unscrambler deck - (8) chains

48' Trailer Tipper Still under power Hydraulic unit and controls are kept indoors and working

60” x 96” table Vertical Linear Motion option 460 volt 3phase includes 5’ x 5’ 10,000# capacity scale as seen on table Approx 20 hours on machine