DAC-1200 DENSACAN - Can DenisfierThe DAC-1200 is a fully automatic and will run continuously as long as cans are being fed. It features an automatic shut-off when empty. -- Capacity in pounds/hour; Aluminium 1,200 Lbs, Aluminium flat 2,000 Lbs, Ferrous 2,500 Lbs. -- Biscuit description: Typical size; 11" x 13" x 9" -- 20 HP motor

DEWALT GA (563A) RADIAL ARM SAW: -- 14" Blade cap., 1" arbor, 3 HP - 3,425 RPM motor, 16" cutoff cap., 4" depth of cut. -- 20" x 50" table; hand crank raise & lower.. - Complete with: Blade guard, 4" dia. dust outlet and starter.

DEWALT GE 20" Radial Arm Saw Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; -- 6" Thickness cap. @ 90°, 27" max. crosscut cap. cutting 2" board; 42" rip cap. with 52" long arm; 2" dado capacity. Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. Includes: -- (1) New 20" blade.Optional: -- VFD Electric brake.Note: Photos are not of actual machines, but they represent the state of "Reconditioning"

DEWALT GA 16" Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: -- Electric brake. -- Photo not of actual machine.

DEWALT 35 Series Super Duty 22" Radial Arm SawSpecifications: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional Electric brake.

DEWALT GE Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, metal stand, table clamps. -- Specifications subject to verification.

DEWALT 10" Radial Arm Saw --Specifications: -- Blade diameter 10", Table size 27" x 30" x 36" H.

DIEHL - 990, ...Gang Rip Saw (Roll Feed)Specifications: -- 30 HP - 3,600 RPM arbor motor, ALLEN-BRADLEY "Size 4" Starter, 110 volt controls. -- 12" Arbor width with: 3-1/2" Max. thickness cap. -- 8-Roll feed: (4) Top (powered) & (4) Bottom. -- Antikickback fingers: Top & Bottom. -- (1) Saw Cartridge: 2-3/4" Saw blade bore. -- New arbor bearings.Equipped with & Features: -- 5 HP Feed: single speed. -- Rip fence. -- Outboard bearing on arbor. -- 3" Throat capacity to 1st saw blade.

DIEHL - DMG -12, ...Profile GrinderSpecifications: -- 1/2" Width cap. and 10-1/2" max. cutting circle. -- 1 HP TEFC Motor with 2,260 RPM grinding spindle. -- (2) 1-13/16" Dia.; 16" X-axis & 6" Y-axis table movement. -- 30° Clockwise & 90° counterclockwise base swivel rotation for face grinding of profile cutters or planer knives. -- +30° to -30° Vertical grinding spindle adjustment. -- 2" In & out adjustment. -- 1" X-Axis & 1-7/8" Y-axis template adjustment. -- 7" Min. & 10" max. grinding wheel dia.Equipped with & Features: --Coolant pump with 5-gallon tank.

DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM 208-203/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel. -- Single cone hopper outlet with 10" Rotary Airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".

DONALDSON / TORIT - 2DF-16, ...Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes "New" AirMax Premium Media Cartridge Filters: Fire retardant. -- Total filter media area: 3,616 ft². -- Air-to-Media ratio @ 8,000 CFM: 2.2:1. -- Automatic Pulse Clean System with: Differential pressure gauge and sequencing control in enclosure. -- (2) Hopper outlets with sealing drum cover kits. -- Steel support structure. -- Includes: 20 HP Top mount, direct-drive Blower. -- Rated for 8,000 CFM. -- Electrical motor starter & controls. -- Includes: Installation/Operation/Maintenance Manuals.Sold with 6-Month Mechanical Warranty

DONALDSON / TORIT - DFT2-16, ...Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes: "New" AirMax premium media cartridge filters: Fire retardant. -- Total filter media area: 4,064 ft². -- Air-to-Media eatio @ 8,000 CFM: 2:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control. -- (2) Hopper outlets with: Sealing drum cover kits. -- Steel support structure. -- Includes: 20 HP Top mount, direct drive blower. -- Motor starter & controls Sold with 6-Month Mechanical Warranty

DOUCET ERS-96/RS-75 MULTI-BLADE PANEL GROOVE/RIP SAW SYSTEM:The Doucet ERS-96/RS-75 Automated Panel GROOVE/RIP Saw System is designed to GROOVE and/or RIP panels as well as edge the sides of core materials. Ideal for plywood, OSB, MDF, HDF and other composite panels.This Line was originally designed for Engineered Flooring Blanks.ERS-96 Grooving Specifications:40 HP - 3,500 RPM belt driven saw arbor motor. Material width cap. 96" maximum. Material thickness 0.5" - 0.625" maximumGrooving pattern on 4" centers across the 96" width of panel. Depth and width of groove approx. 3/16" kerf/width by 1/8" deep.3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. Saw arbor accessible from above for tool changes. -- Feed system:5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.(4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning. -- Complete with:Dynamic saw arbor brake; Infeed anti-kickback fingers; Saw blade safety interlock cover; 12" dia. dust collection outlet (4,000 CFM required). RS-75 Ripping Specifications:40 HP - 3,500 RPM belt driven saw arbor motor. Material width cap. 60" maximum. Strip width cap. 2.5" minimum. Depth of cut 0.25" - 0.75" (6 - 19 mm) maximum.3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. Saw arbor accessible from above for tool changes. -- Feed system:5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.(4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning. -- Complete with:Dynamic saw arbor brake; Infeed anti-kickback fingers; Saw blade safety interlock cover; 12" dia. dust collection outlet (4,000 CFM required). -- Operator Interface: Doucet OI/HMI Control System for automatic loading & stacking with minimal human intervention other than a forklift operator to bring in new material and remove the processed parts/strips. -- Options Include:&#9679 (1) Doucet AP-508 Automatic panel feeder with Indexing scissor lift. &#9679 (1) Cross Transfer Chain Conveyor to feed panels sideways by the long edge through the Groover, max width 96". &#9679 (1) Cross Transfer Chain Conveyor to feed panels short end wise through the panel RIPSAW, max. width 60" &#9679 (1) Outfeed Lift Table to automatically stack ripped strips. &#9679 Maximum weight of stack: approx. 5,000 LBS. -- Actual Model is DOUCET RS-75/ERS-96

DURA-QUIP - VC-3532, ...Vibrating Conveyor: -- Specifications:35" Wide x 32' Long; Pan is 7" deep and has 1/4" round holes punched plate in most of length to allow sawdust to drop outside of Conveyor. -- Bottom frame is filled with concrete 12" deep and rests on coil springs to isolate vibration from the ground. Buyer to replace screens. -- Include: 10 HP TEFC 460 V Drive motor.

DUST TECHNOLOGY DT-75 Dust Collector7.5 HP BALDOR Motor, compact 3-bag free standing & self-contained heavy-duty dust collector, rated @ 3,450 CFM, 9" - 11" static pressure at fan. -- Equipped with: 12" Inlet dia., (3) upper filter bags with 99 sq. ft. filter area (patented BEANE bags designed to be 99% efficient to .5 microns). -- Dynamically balanced sand cast poured aluminum high quality impeller with easy access; 45 Cu. ft. collection cap., dust is collected in 6-mil thick clear plastic or canvas collection bags for easy disposal or reuse, a unique adjustable baffling system assures even filling of bags. -- Includes: Manual motor starter with thermal overloads & push button station.