704-841-2001
Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!
Industry
Sawmill
762 Results Found
704-841-2001
HUSTLER - 48", ...Inclined Infeed Cleated ConveyorThis Conveyor is "New, Never Used," and stored outside. Specifications: -- Width: 48 In. -- Horizontal load area: 8 Ft. -- Inclined height: 21-1/2 Ft. -- Total length: 31-2/3 Ft. -- Main motor: 5 HPEquipped with: -- Oiler -- Cleated
Call for Price
IBC TR-13-150 2-Ram Horizontal BalerSpecifications: -- Main Bore: 13" -- Eject Cylinder: 9" -- Horsepower: (2) 75 HP Each -- Feed Opening: 58" x 88"
INGERSOLL RAND - RS30IE-A125, ...40 HP Screw Compressor40 HP Motor, 196 CFM @ 115 PSI; totally integrated package.Specifications: Single-stage rotary screw air-end; max. modulate pressure 118 PSI; full sound enclosure keeps noise levels below (75) dBA. -- Equipped with: -- Microprocessor based control system, premium instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control System: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns. Approx. (23,000) Total operating hours.
Call for Price
INGERSOLL-RAND UP6-15C-125 15 HP Single-Stage Horizontal Tank-Mounted Rotary Screw Air Compressor, with 2,313 Hrs. (as of 2/16/24)Specifications: -- Cap. 55 CFM, Max. pressure 125 PSI. -- Pump speed 6,250 RPM. -- Sound level 69 dBA. Equipped with: -- High efficiency close coupled air end. -- Motor shaft-mounted centrifugal blower. -- Electronic stepper motor inlet air control. -- 2-Stage Air-cooled aftercooler. -- Total positive lubrication system, with Spin-on filter. -- Compartmentalized sound enclosure.Complete with: -- 80 Gallon Cap. 24"; Dia. x 33"; L Horizontal Air Receiving Tank.
INGERSOLL RAND - UP6-15C-150, ...ROTARY SCREW AIR COMPRESSOR & Horizontal TankSpecifications: -- 15 HP Motor, 55 CFM @ 125 PSI; totally integrated package, single-stage rotary screw air-end; max. modulate pressure 125 PSI. -- Full sound enclosure keeps noise levels below 75 dBA. Standard Features Include: -- Instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control. -- Sealed SSR direct drive gear train; total positive lubrication system with spin-on filter. -- Mounted on horizontal tank.. (28,000) Total operating hours.
INGERSOLL RAND SSR-EP30SE Rotary Screw CompressorSpecifications: -- 30 HP Motor, approx. 120 CFM @ 125 PSI, totally integrated package, single stage rotary screw air end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below 75 dBA.Features: -- "Intellisys" Microprocessor based control system, premium instrument panel, air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter.Control system includes: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns.(23,069) Total operating hours.
Call for Price
INOTECH 200 HP DUAL BOX SHAVING MILLSpecifications for one system: -- (2) 100 HP Motors -- (2) Boxes 48" x 106" -- (2) Cutter Heads 48" Long with 10 Knives Each -- (2) Slide Out Modules for Maintenance of Knives Cutter Head -- Production Capacity up to 2,000 cu./ft. per hour -- In a Very Good Working Condition -- Loaded on your Truck(2) Complete Systems Available.Price is for one Unit unless otherwise stated.
INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler
INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP
INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP
Call for Price
INTERNATIONAL - TITAN-60-EC, Wide-Mouth Closed-Door Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 56" x 40" -- Main motor: 30 HP -- Max. ram force: 175,929 LbsEquipped with: -- Ethernet MICROLOGIC 1100 PL Controller -- Regen Hydraulics -- Adjustable serrated shear blade -- Tongue & Groove floor -- AR 400 Floor Plate -- Conveyor controls and conveyor hopper
Call for Price
INTERNATIONAL - AT-4843-850-60, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 50 HPEquipped with: -- Control panel -- Oil Cooler: Air-Over-Oil -- 10' Bale Run-Out Table -- High temp/low oil level shutdown
Call for Price
INTERNATIONAL TITAN-60-EC Full Eject Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Feed opening: 58"; x 35"; -- Bale Size: 60"; x 48"; x 30"; -- Feed conveyor width: 48" -- Ram face pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Cycle time: 32 Sec (14 Sec short stroke)Equipped with: -- Programmable controller with Ethernet -- Conveyor controls and conveyor hopper
Call for Price
INTERNATIONAL TITAN 6-EC Closed Door Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8"; -- Motor: 20 HP -- Cycle time: 32 Sec Cycle Time -- System pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Ram face pressure: 87 PSI -- Feed opening: 58"; x 35"; -- Bale size: 60"; x 48"; x 30"; Equipped with: -- Feed conveyor: 48" wide -- Programmable controller -- Ethernet connection
Call for Price
INTERNATIONAL MT-4843 Manual-Tie Horizontal Baler With Infeed ConveyorSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 40 HPEquipped with: -- Control panel -- Oil Cooler – Air-Over-Oil -- 10' Bale Run-Out Table -- High-Temp/Low Oil Level Shutdown -- 48" x 43" x 60" Bale Size
INTERNATIONAL - 1272-HD, ...Horizontal Closed BalerNOTE: Complete with Fluffer!SPECIFICATIONS: -- Bale Size: 72" x 30" x 36" -- Main Motor: 30 HP -- Cylinder: 7" -- Feed Opening: 50" x 28" -- Total force: 86,500 Lbs -- Cycle Time: 23 Sec -- Shipping weight: Approx. 8,500 LbsFeatures: -- Single Fluffer -- Hopper is included
INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls
INTERNATIONAL BALER - 1296, Wide-Mouth Closed Door BalerSpecifications: -- Cylinder: 8". -- Feed opening: 60" x 42". -- Bale size: 44″ x 36″ x 72″. -- Power unit: 40 HP.
INTERNATIONAL BALER - IB-4430-50, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8". -- Ram force: 125,660 Lbs. -- (6) Tension cylinders: 4" Bore. -- Feed opening: 42" x 50". -- Main motor: 40 HP.Equipped with: -- Shear blade with adjustable striker bar. -- Regin hydraulics. -- LED Indicators for bale functions. -- Autostart electronic beam. -- Oil cooler. -- Replaceable T-1 floor.NOTE: Ram needs some repair.
IBC Horizontal Closed Door Baler Model NA-1296A-48 -- 50 HP Motor --10″ Main Cylinder --Bale Size: 30″ x 45″ x 60″ --Hopper Size: 57″L x 45″W --Platen Pressure: 134 PSI --System Pressure: 3,000 PSI --Total Force: 235,620 lbs --New cylinder installed approximately 6 months ago