Porter 715-A Top surface planerPorter Surfacemaster 715 Planer is ideal for for flattening and prepping lumberSpecifications -- 15HP, 3PH, 230/460V --3/4HP Elevation Motor -- Chain Driven Carpet Feed -- 24″ Wide Cutterhead with Dispozablade Knives(Comes with ITCH head as a alternate option) -- 8" Max Thickness Capacity -- Power Elevation -- Wixey Thickness DRO -- Spike InfeedEquipped with & Features -- Magnetic Start/Stop -- 6" Dust PortWeight is approx 6500lbsNOTE: This surfacer is a beast, and will operate with very little vibration due to its large cast iron frame. These machines are known to make chips, and are excellent for prepping or surfacing lumber. Machine was used prior in a cabinet shop, and is being sold as it was replaced with a double side planer.

Porter 165 Double Sided Buck Shaper --4" Long spindle --, 8" vertical & 5" horizontal travel, interchangeable 3/4" spindle, -- 3 HP motor, 12,000 - 18,000 RPM.Will also include a Grizzly HP G4181 power feeder.

POWERMATIC Shaper TS-29, with Sliding Table & Tilting SpindleSpecifications: -- 3/4", 1", & 1-1/4" Dia. interchangeable tilting spindle, 3/8" & 1/2" collet & router bit adapters, tilts 45° forward and 5° back, 7-1/2 HP - 3,600 RPM motor; 3,000 - 4,000 - 6,000 - 8,000 - 10,000 RPM spindle speeds via 4-step V-pulley with "quick release". -- 4-3/4" Cap. under nut when using the 1-1/4" spindle, 7-1/16" spindle travel; 51-1/2" x 33-1/2" extra thick cast iron main table, (3) removable table inserts 2-1/2" - 5-1/2" & 5-7/8" x 4-3/16" (oval).Complete with: -- Large scale "ACCU Fence" with integrated 4" dust collection shroud, reversing switch, AMBI-TECH electronic brake, cutterhead guard, clamping miter gauge & magnetic control; incl. owners manual & parts list. Actual Model # 1791284

Accepts 3/4", 1", & 1-1/4" Dia. interchangeable spindles, 5.5 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using the 1-1/4" spindle, 6-19/64" spindle stroke; Approx. 39-1/2" x 31-1/2" extra thick cast iron main table, -- Complete with: Adjustable split fence, spring hold downs, removable table inserts, dust collection shroud, reversing switch, spindle brake, and cutterhead guard. -- Includes: Infeed and outfeed tables shown in picture. - Note: Needs some work on bearings.

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with: 24" x 26" Cast iron table w/miter slot and 7" insert opening. -- Equipped with: Adjustable Fence, and Magnetic controls, 4-Roll 4-speed Power Feeder .

POWERMATIC Shaper PM 2700, Spindle Shaper model 128-0102C 5 HP, Single Phase, 230 V - 1280101-CSpecifications & Features: -- Digital readout gives the use of exact spindle height and allows for 0.001" adjustments. -- 4" Spindle travel. -- 5 HP Motor -- Heavy-duty 30" x 40" precision ground tabletop for smooth stock feeding and Heavy-duty cast iron base. Includes: -- 3/4" and 1-1/4" spindles -- Independently adjustable fence sides. -- Micro-adjust control knobs allow for precision adjustment for the fence. -- Integrated casters can be raised and lowered to mobilize shaper. -- Superior clear cutter guard promotes safety, allows observation of the entire cut. -- Table predrilled and tapped for Power Feeder mounting.Dust Collection Minimum CFM Required (CFM) 600; 4"Dust Port Outside Diameter

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP (3.7 kW) - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with:24" x 26" Cast iron table w/miter slot, 7" insert opening, adjustable fence, and Magnetic controls. -- Actual Model is POWERMATIC 26

POWERMATIC 28 SHAPER1-1/4" Dia. spindle, 7.5 HP - 3,600 RPM motor; with 3,300 to 9500 RPM spindle speeds via Factory installed Variable frequency Drive. 4-3/4" Cap. under nut when using the 1-1/4" spindle, spindle brake, 30" x 39" table.

POWERMATIC MODEL 100 PLANER12" Cap., 5 HP 5,300 RPM belt driven main motor, 1/16" to 5" thickness opening, 3-1/8" dia. 3-knife cutterhead with high speed steel knives, 18 FPM fixed feed speed with in-out clutch -- Corregated infeed rolls; 12" x 24" precision ground cast iron table. 1/4" max. depth of cut, 7-1/2" min. stock length (unbutted). -- Complete with: Knife grinder, Magnetic controls, cutterhead guard with dust chute on enclosed steel stand.

POWERMATIC 221 PLANER WITH BYRD HELICAL HEAD20" x 8" Cap., 10 HP TEFC belted drive motor, BYRD Helical cutterhead, hand wheel micro-adjust table; 1 HP feed motor for variable speed from 20 - 50 FPM, segmented infeed roll and sectional chipbreaker, 4" dia. smooth outfeed roll. -- Complete with: Magnetic starter and dust hood.

20" Dia. dynamically balanced aluminum disc, 3 HP - 1,740 RPM direct drive motor; 15" x 27-1/4" table w/miter gage slot, tilts 30° upward & lowers 45° downward, 90° positive table stop; rack mechanism for raising & lowering table by hand crank, heavy bolt-down steel base. Complete with reversing switch and miter gauge. Also available in Single-phase in 2 HP motor.

POWERMATIC WB-25 WIDE BELT SANDER1-Head, 25" width capacity, 1/8" to 6" thickness capacity. Combination sanding head with 4" dia. rubber covered contact roll & 2" wide polishing platen, micro-adjust platen. steel abrasive belt tension roll and steel idler roll. 25" X 75 abrasive belt capacity. Equipped with: -- 15 HP Three-phase main motor, 1 HP variable feed motor, 15-49 FPM. -- 1/4 HP table raising and lowering motor with Auto adjust thickness assist, 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout, air eye belt sensing, limit switch overtravel protection, magnetic starter, overload protection, load meter and emergency brake; includes owner's manual & parts list.

POWERMATIC RB-37 SINGLE HEAD WIDE BELT SANDER1-Head, 36" width cap., combination sanding head with 4" dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size 37" x 60", with air tensioning, air jet abrasive belt tracking; 1 HP feed drive, variable feed speed of 15 - 30 FPM conveyor speed, 0" to 5-1/4" opening with (4) screw jacks, double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter, overload protection, load meter and emergency brake.

POWERMATIC Turbo Cone Dust Collector with Twin Canister Filter Kit;Complete with the following features: -- 3 HP 3 PH Material Fan, -- Generates 1,782 CFM. -- Ships from Oregon Coastal region.

PRESTO XL36-20 Scissor Lift2,000 Lbs load capacity for evenly balanced load. -- 7-1/4" Lowered height. -- 36" Travel to raised height of 43". -- 17 Seconds travel time. -- Hinged platform for access to cylinders and internal power unit in collapsed position. -- 24" x 48" standard platform size. -- 3/4" Steel plate scissor legs. -- Heavy Duty hydraulic cylinders with chrome plated rams. -- Lifetime lubricated bearings on all rollers and pivot points. -- Electro-hydraulic 1 HP motor. -- Standard hand control pendant. -- Standard safety velocity fuses. -- Safety maintenance device.

PRESTO XL60-60 Scissor Lift6,000 Lbs. load capacity for evenly balanced load.Specifications: -- 10" Lowered height. -- 60" Travel to raised height of 70". -- 30 Seconds travel time. -- Hinged platform for access to cylinders and internal power unit in the collapsed position. -- 48" W x 96" L platform size, base 24" W x 86" L. -- 3/4" Steel plate scissor legs. -- Heavy Duty hydraulic cylinders with chrome-plated rams. -- Lifetime lubricated bearings on all rollers and pivot points. -- Electro-hydraulic 3.2 HP motor. -- Standard hand control pendant. -- Standard safety velocity fuses. -- Safety maintenance device.

PROFILEMATIC 503 PROFILE SANDER3-Head feed through, sands from top at adjustable angles narrow moulding type parts as well profiled edges on panels.Equipped with: -- (3) Top VPS vibrating air-loaded sanding units, 0.5 HP vibrating motor ea., sanding heads have (2) pneumatic cylinders for sanding pressure control and oscillate with 1/2" stroke on dust-protected round guides, variable vibration speed from 200 - 1,800 RPM; adjustment range of 120ø to conform to profile, equipped with air shower to clean workpiece & sandpaper automatically. -- Part transport is achieved by a 4-1/2" wide linatex coated conveyor belt system, "quick adjustment" holddown wheels & fence system, variable feed speed 0 - 35 FPM powered by a 0.25 HP DC gear drive (forward & reverse feed mode). -- Each sanding head with its own controls for manual raise & lower, pressure control and vibrating speed. Profile width approx. 1/2" min. to 4" max., material feed through thickness up to 5"; support fences for up to 10" moulding width.

2 HP motor,220V, 3 PH, 60 HZ -- V-belt drive, Allen Bradley push button overload control. -- Seller recommends replacing rubbers & covers.

PROSAND HF-412 Curved Part Belt SanderBelt oscillates up and down.÷Feed wheel removable.

PTR - 2300HD, ...Vertical Downstroke BalerSpecifications: -- Cylinder bore: 6"; x 3-1/2"; -- Feed Height: 54-1/2"; -- Rod stroke: 48"; -- Baler chamber (depth x height): 30"; x 48"; -- Main motor: 10 HP -- Load opening (width x height): 60"; x 27"; -- Cycle time: 56 Sec -- Systems pressure: 2,000 – 2,700 PSI -- Bale size platen force: 56,500 Lbs