ALJON - 400XL, ...Logger/BalerSpecifications: --Scrap Metal (average): 6 - 10+ Metric tons/Hr. -- Approx. (14,500) hours.Dimensions: --Height: 13 Ft. - 6 in. (4,115 mm). --Width: 8 Ft. (2,438 mm). --Length: 39 Ft. (11,887 mm). --Weight: 61,850 Lbs (28,055 kG). --Tires: 11:00 x 22.5 Tubeless Radial Tire. --Loading Area: 8 Ft. (2,438 mm) x 12 ft. 4 in. (3,759 mm). --Log Size: 20 In. (508 mm) high x 32 in. (813 mm) wide x variable length. --Density: 25 - 60 Lbs/cu. ft (400 - 961 kG/cbm).Material Handler --23 Ft. (7,010 mm) Boom Reach. --The "400XL" Baler’s curved box design and larger loading chamber efficiently process: Bulky loose scrap, white goods, and gauge material down to manageable 20 in. (508 mm) x 32 in. (813 mm) x variable bundles; 20 in. (508 mm) minimum. The operator controls the 3-way compression process from the cab.Final compression is fully automatic. Increased hydraulic power allows the operator to sort & stack material during the automatic baling cycle, eliminating lost labor time and minimizing the labor cost per ton. -- NOTE: The main piston needs work (leaking), and (1) piston that closes the box needs to be rebuilt.See the attached literature for detailed technical specifications.

ALDO BERRONE AIRONE 2 Single End Tenoner3-Station Tenoner with Trim; top & bottom tenons and cope head with manual sliding table. -- 1st Station: Trim saw, 10" max. dia. saw blade. -- 2nd Station: Top & bottom tenon heads, 25 mm dia. x 3-15/16" long spindles, 3/16" - 2-1/16" max. tenon thickness, 3 HP motor belt driven to saw & tenon heads. -- 3rd Station: Cope head, 35 mm dia. x 3-15/16" long spindle, 9-7/8" - 11-7/8" max. cutting circle, 2 HP motor. Equipped with: --² 15" Long x 12" wide sliding table (approx. 50" travel), tilts 0ø - 30ø down, -- Overhead pneumatic holddown and tilting fence line;

ALLEGHENY - 18-250C, ...Paper Shredder -- 20 HP Motor -- (250) Sheets per pass -- 1/2" Straight cut -- Loaded onto your Truck

---In Auction---Good Condition---10.5' Cutting Length--- ALTENDORF F-90 10-1/2' Sliding Table Saw Specifications: - Max. cutting length 3,200 mm (125.98”). - Max. depth of cut 105 mm (4.13”). - Dado cap. 30 mm (1.18"). - Main saw: 5.5 kW (7-1/2 HP) Motor, Blade dia. 300 - 350 mm (11.81” - 13.78”), Fixed arbor dia. 30 mm (1.18"), & Blade speeds 3,600, 4,800, 6,000, & 7,200 RPM. - Scoring saw: 0.75 kW (1 HP) Motor, Blade dia. 120 mm (4.72”), & Arbor dia. 22 mm (0.87"). Equipped with: - 11-1/2” x 126” x 33-3/4” H 2-Position Aluminum sliding table, with Lock. - 28-1/2” x 48” x 33-3/4” H Cast-iron fixed Table. - 16” x 26-1/2” x 33-3/4” H Aluminum extension table. - 20-3/4” L x 1-3/4” H Cast-iron rip fence, with Rip cap. 1,250 mm (49.21"). - Aluminum cross cut fence, with Cross cut cap. 2,800 mm (110.24"), (1) Aluminum flip stop, Telescoping support arm, & (2) Multidirectional aluminum bars. - Parallel overhead blade guard. - Control, with LED RPM meter & Knee-level emergency stop button. Complete with: - 16” x 33” x 33-3/4” H Aluminum Auxiliary Table. Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/PS-230217/event/A051324$1

AMERISHRED MODEL PT-1010, ...Dual Shaft Shredder Specifications: --Model: PT-1010(2) 10HP MotorsHigh Torque / Low Speed (2) Shafts5/8" Hook Cutters23" x 20" Feed OpeningConveyor: 17.5'L x 24"W with 2' Feed Hopper

AMERICAN - 1130-T50, ...2-Ram Horizontal BalerThe "1130-T50" has the power to produce the bale densities required to maximize container shipment.Specifications: -- Main Cylinder: 11" -- Dual Motor Configuration: (2) 50 HP -- Compressions Force: 475,167 Lbs -- Ram Face: 303 PSIEquipped with: -- Versa Door for Bale Separation. -- Oversize Bale Relief & Plug Baling. -- Superior construction. -- Single sheet steel. -- Solid side plate and bale ejection throat. -- Fully lined Charge Box: Replaceable "AR500" HARDOX® liners fully line the floor, side walls, and press box top. -- Extra long Charge Box (110"; with stamper): Allows the RAM II to accept longer items such as extrusions and minimize the potential for material bridging. -- ALLEN-BRADLEY PLC with: Pathfinder touchscreen interface & IEC starters.

AMERICAN - DC-6348-8T30, ...Horizontal Auto-Tie BalerSpecifications: -- Feed opening: 63"; x 41-1/2"; -- Charge box: 43"; x 42"; x 72"; -- Bale size expanded approx: 44"; x 43"; x Variable to 72"; -- Power unit: (2) 30 HP -- Cylinder: 8"Equipped with: -- Open-End Auto-Tie BalerNOTE: Has only approx. (92,600) bales of OCC

AMERICAN BALER - DC-6343-830, ...Horizontal Auto-Tie BalerSpecifications: -- Bale size: 44"; x 43"; Up to 72"; -- Motor: 30 HP -- Cylinder: 8" -- Feed opening: 63" x 41-1/2"Equipped with: -- Manual and automatic controls and 10"; touchscreen -- Ripper Bars and replaceable Brinell liners -- (4) Spring loaded bale dogs -- 5-Tie Auto Tie and air to oil Cooler -- Loaded onto your Truck

AMERICAN BALER - 8043H10150F, ...Wide Mouth Horizontal Auto-Tie BalerSpecifications: -- Cylinder: 10" -- Motor: 150 HP (Twin; ea. 75 HP) -- Combo-belt Conveyor: 72"Equipped with: -- Shear blade -- Wire Tie System

AMERICAN BALER - DC-6343-830M, ...Horizontal Auto-Tie BalerSPECIFICATIONS: -- Bale Size: 44" x 43" x Variable Length -- Motor: 30 HP -- Cylinder: 8" -- Feed Opening: 63" x 41-1/2" -- Loaded on your Truck

AMERICAN BALER - PW3560-830, ...Closed-Door Manual Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Door cylinder: 4" -- Ram penetration: 3/4" From door -- Feed opening: 35" x 57 -- Charge Box: 51"; x 59"; x 29"; -- Bale size expanded: Approx. 45"; x 30"; x 60";Equipped with: -- 4-Sided shear blade -- Regen hydraulics -- Full pen

AMERICAN BALER - 5029H930R, ...Auto-Tie Horizontal Baler with Infeed ConveyorSpecifications: -- Main motor: 30 HP. -- Cylinder: 9". -- Feed opening: 50" x 27". Equipped with: -- Control: SIEMENS PLC. -- X-tra Dogs installed. -- Vertical hydraulic ram.

AMERICAN BALER 8043-10-120 Auto-Tie Horizontal BalerSpecifications: -- Main cylinder: 10″. -- Bale size: 43″ x 43″ x variable. -- Feed opening: 80″ x 41-1/2". -- Power unit: (2) 60 HP Motors. -- Total ram thrust: 235,620 Lbs. -- Pressure settings: 3,000 PSI. -- No load cycle time: 9-1/2 Sec approx. -- Oil Capacity: 400 Gal

AMERICAN BALER 5042-10-30R Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 10" -- Main motor: 30 HP -- Charge opening: 50 x 24"Equipped with: -- Infeed conveyor

AMERICAN BALER 5042-AT-840 Auto-Tie Horizontal BalerSpecifications: -- Feed Opening: 49-1/2" x 40-1/2" -- Bale size: 42" x 42" x Variable -- Main cylinder: 8" x 66" Stroke -- Main motor: 40 HP -- No load cycle time: 25 Sec -- Under load cycle time: 43 Sec

AMERICAN BALER 6042H-830 Auto-Tie Horizontal Baler(2) Balers are available in good condition and includes loading on your truck. Specifications: -- Cylinder: 8" -- Main motor: 30 HP -- Feed opening: 60" x 42"Equipped with: -- Automatic wire tieAvailable in March 2024, reserve yours now.

CAM-WOOD SP-35G Fixed Spindle ShaperA Shaper with plenty of cast iron... a solid piece of machinery!Features & Specifications: -- .Precision ground cast iron table and T-slot miter gauge slot. -- Perfect alignment, rigid spindle supported by a power transfer system for accuracy. -- Individual micro adjustment fence on both sides of the spindle by hand wheels. -- Large hand wheel for fast movement and lock protection. -- Magnetic switch for overload protection. -- Spindle travel is operated by a rack and scroll gear. -- Two spindle speeds for versatile cutting. -- Forward and reverse switch for cutting directions. -- Heavy gauge metal cabinet base. -- Alloy steel spindle for durability usage. -- Sealed long-life ball bearings. -- Standard equipment: Full power motor, dust chute, table insert, spring hold-downs, miter gauge. -- Table Dimensions: 30" x 40". -- 1-1/4" Standard Spindle Dia. --Spindle Speed: 4,000 - 10,000 RPM. -- 5 HP Motor. -- 4" Dust Hood.

CAM-WOOD SP-30 Fixed Spindle ShaperA Shaper with plenty of cast iron... a solid piece of machinery!Features & Specifications: -- 5 HP Motor with reversing switch. -- Interchangeable spindle as standard with a 1" & 3/4" spindles. -- Spindle with 4" under nut. -- (2) Spindle speeds of 8,000 & 10,000 RPM. -- Large 30" x 28" cast iron precision ground table. -- 7" Max. table ring. -- Easily locked spindle for cutter change. -- Micro-adjustable back fence with material spring holddowns. -- Includes Miter gauge, cutterhead guard assembly, and operators manual.NOTE: Available in 3-Phase and 1-Phase electric.SP-305C 2-PCS ROUTER BIT COLLECTOR SET $ 89.00.

CAM-WOOD SP-750x Heavy Duty Shaper. 7.5 HPSpecifications: -- Table size: 48 x 36.5'' -- Height of Working Table: 35-1.2". -- Spindle 1'',1.25''. -- Motor: 7.5 HP (10 HP Opt.). -- Speed (RPM): 3,000/4,500/7,500/10,000. -- Dimensions: 53' 'x 43'' x 51''. Weight: 1480 LbsFeatures: --Designed for heavy industrial work. -- Industrial powerful motor for maximum cutting capacity. -- Quick-change spindles. -- Forward / reverse switch. -- Individual two-sided micro adjustable fence. -- Precision ground large cast iron table. -- Three spindle speeds for versatile cutting. -- Sealed long-life ball bearing. -- Metal 4"; dust hood. Heavy sheet metal cabinet base for durability usage. -- Magnetic control for overload protection.

CAM-WOOD RS-640X Radial Arm Saw Sturdy cast iron frame for saw head and arm.Specifications: -- 4 HP motor; 4-1/8" cutting depth with 14" dia. blade; 43" max. trimming width x 24" max. crosscut. Equipped with: -- Laser Light, magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head that glides on ball-bearings against a hardened steel surface; spring-loaded saw head return. -- Large 44" x 33-3/4" wooden table. -- Heavy gauge steel base and legs for solid support. Features: -- 0° - 180° Saw head rotation (horizontal); 0 - 90° head tilting (vertical), with positive locks on a rotating head. Includes: -- Upper & lower blade guards and anti-kickback attachment.