EVASHRED EV60E Dual Shaft Shredder with Infeed ConveyorEvashred is a well-known brand of commercial mobile and stationery shredders for solid waste designed and manufactured by F.V. Evans and Sons also known as Evans Engineering.Every type of shredder is designed specifically to shred a particular type of solid waste including Documents, Car & Truck Tyres, E-scrap (Hard Drives, Computers, Printers known as E-waste and e-scrap), Plastic, Foam rubber, Green Waste, Building Waste even Hospital WasteSpecifications: --30 kW / 40 HP Maximum Power --28-30 RPM Cutter Speed Rotation --Width 640 mm x 37 5mm Cutting Chamber Opening

Used for the accurate radius measuring of cutterheads; allows for speedy tool changes on moulder. 12" Long x 6-1/2" base, 1-1/2" dia. arbor will handle up to 9-1/4" long tool body. -- Digital caliper rides up and down on precision machined octagonal bar. -- Options: T-bushings for 1-13/16" dia. & 40mm dia., please specify.

EXCEL 2R10 Horizontal Auto-Tie Baler with ConveyorSpecifications: -- Main cylinder: 10"; -- Eject cylinder: 9";; Bore 6"; -- Cycle time: 16 Sec -- Bale size: 60"; x 45"; x 30"; -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- Bale Discharge Platform -- Steel Belt Feed Conveyor -- Automatic bale release Door -- US Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- EXCEL Autonetics with absolute RAM position sensor with Electronic display -- US Wire Tie Systems - Automatic 342 Tier with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with Hardox® 400 replaceable wear liners -- 300-gallon Hydraulic Reservoir with regenerative circuit (600-gallon 2R10) -- Upper & lower photo-eyes (sender/receiver upper photo-eye with integrated Conveyor control) -- NEMA 12 Rated enclosures and controls with Conveyor starter -- CASTELL key safety interlocking Entry System -- Bale Chamber penetration (S2R9: 27";; 2R10: 24";) -- Automatic bale release door -- Automatic shear jam correction -- Bale discharge platform

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10"; -- Eject cylinder: 9";; 6"; Bore -- Cycle time: 16 Seconds -- Bale size: 60"; x 45"; x 30"; -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10"; -- Eject cylinder: 9";; 6"; Bore -- Cycle time: 16 Seconds -- Bale size: 60"; x 45"; x 30"; -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL 2R63 2-Ram Horizontal BalerSpecifications: -- Main Cylinders: Twin 6" -- Eject Cylinder: 6" -- Main motor: 20 HP -- Cycle Time: 29 Sec -- Overall Force: 159,467 Lbs -- Feed Opening: 60" x 54" -- Bale Size: 60" x 48" x 30"Equipped with: -- U.S. 343 13 Gauge Wire Tier

EXCEL EX60(Non-Ferrous) Horizontal Closed Door Baler With In Feed ConveyorSpecifications: -- Motor: 20 HP. -- Cylinder: 9". -- Ram Force: 190,851 Lbs. -- Feed Opening: 40" x 55". -- Full Bale Chamber Penetration. -- Wear Liners: Hardrock 400 -- Automatic Shear Jam Correction.Price includes Loading onto your Truck.

EXCEL EX-62 Horizontal Closed Door Baler Specifications: -- Feed Opening: 54" x 35" -- Main motor: 20 HP -- Cylinders: (2) 6" -- Total Ram Force 159,400 lbsFeatures: -- Removable shear blade -- Tongue and groove floor -- Full Penetration -- Loaded on your truck

EXTREMA ET-100 Fixed Spindle Shaper; "Extremely" well-built and with solid features. -- Single phase with 3 HP or 3-phase with 5 HP motor. -- Interchangeable spindles of 1-1/4" and 3/4". -- (2) Spindle speeds of 7,500 & 10,000 RPM. -- Heavy cast iron table with a 6" max. table ring. -- Spindle lock, micro-adjustable back fence and reversing switch. -- Miter gauge, 1/2" router collet adapter and cutterhead guard.

EXTREMA ET-120 Spindle Shaper;"Extremely" Well-built and with solid features. -- 5 HP Single-phase motor. -- Interchangeable spindles of 1-1/4" & 3/4" and (1) router collet adapter. -- Dual drive belts and (2) spindle speeds of 7,500 & 10,000 RPM. -- Heavy cast iron table with a 6" max. table ring. -- Spindle lock, micro-adjustable back fence and reversing switch. -- Complete with: Miter gauge, 1/2" router collet adapter and cutterhead guard.

EXTREMA ET-120.3 Shaper w/Fixed Spindle; "Extremely" Well-built and with solid features. -- 5 HP motor. -- Interchangeable spindles of 1-1/4" & 3/4" and (1) router collet adapter. -- Dual belts and (2) spindle speeds of 7,500 & 10,000 RPM. -- Heavy cast iron table with a 6" max. table ring. -- Spindle lock, micro-adjustable back fence and reversing switch. -- Miter gauge, 1/2" router collet adapter and cutterhead guard.

"Extremely" Well-built and with solid features. -- Solid spindle of 1-1/4" with 5-13/16" under nut. -- Dual belts and (3) spindle speeds of 5,500 - 7,500 & 10,000 RPM. -- Heavy cast iron table with a 12-3/8" max. table ring. -- Spindle lock, micro-adjustable back fence and reversing switch. -- Large 7.5 HP motor. -- Miter gauge, cutterhead guard assembly, operators manual, and tool kit.

EXTREMA ET-160 Fixed Spindle Shaper;"Extremely" Well-built and with solid features.Specifications: -- Solid spindle of 1-1/4" with 5-13/16" under the nut. -- Large 10 HP motor. -- (3) Spindle speeds of 5,500 - 7,500 & 10,000 RPM. -- Heavy cast iron table with a 12-3/8" max. table ring. -- Spindle lock, micro-adjustable back fence, and reversing switch. -- Miter gauge, cutterhead guard assembly, operator's manual, and tool kit.

EXTREMA DB-75 TYPHOON BLOWER. Capacity 7.5 HP motor and rated at 4,700 CFM. -- Solid heavy gauge steel construction. -- Heavy duty 13.5" dia. dynamically balanced steel impeller. -- 12" Inlet, 13.5" impeller, 14" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. -- Complete with magnetic starter. -- Note: 460 Volt available

EXTREMA DCF-327E Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- Available for outdoor & indoor use; unit is enclosed. -- Excellent addition to the "DCY Typhoon" Dust Collector; ...ask us why!

EXTREMA DC-250.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (1) Fabric filter bag placed above plastic collection bag. -- 2,975 CFM rated output. -- 5 HP Induction motor. -- 14-1/4" Steel blower fan impeller is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bag filters dust particles down to (1) Micron in size. -- Low noise operation. Includes: Sturdy steel tripod cyclone mounting stand. Drum dollie (drum not included).

EXTREMA DC-275.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM. -- 7.5 HP Induction motor. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Sturdy steel tripod cyclone mounting stand and drum dolly. (drum not included).

EXTREMA DC-2100 TYPHOON Cyclone & Fabric Filtration Dust Collection System.Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (2) Fabric filter bags placed above plastic collection bags with 117 Sq. Ft. total cloth area -- 32 Cu. Ft. of storage capacity -- Rated at 6,400 CFM at 16" static pressure output. -- 10 HP Induction Motor. -- Inlet 13" with 16" Steel blower fan impeller that is dynamically balanced.Features: -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter out dust particles down to (1) Micron in size. -- Low noise operation. Includes: -- Sturdy steel tripod cyclone mounting stand and drum dollie (drums not included).

EXTREMA DC-3050.3 TYPHOON Fabric Filtration Modular Dust Collection System. -- With 1-micron dust filtration efficency this collector will make your shop cleaner, healthier, and more productive. -- (2) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 3,075 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 5 HP blower motor. -- 13" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy addition or removal of plastic bags. -- 1-Micron filter bags with 6 mil plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit. -- Also available in Single Phase.

EXTREMA DC-3075.3 TYPHOON Fabric Filtration Modular Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 4,550 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 7.5 HP motor with push button control and motor starter, 12" inlet. -- 13.5" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit.