GLOBAL BAGGER SYSTEMSpecifications: -- Support Structure 2" Tubular Steel -- Height 86 Inches -- Length 12 Feet -- Width top 60" and 90" Base -- Total Weight 1900 Lbs approx. -- Hopper Width 60" -- Hopper Length 106" -- Hopper Depth 44 " -- Capacity 3 Cu.Yards -- Hopper Conveyor Length 146 " -- Hopper Conveyor Width 25" -- Rubber Conveyor Belt 18" Wide -- Bag Clamp Air Operated -- Heat Sealer 24" capacity -- Bagging Capacity up to (200) Bags per HourOptions available, but not included; -- Weight Measure Scale -- Air Compressor -- Bag Stitching Machine -- One Year Warranty -- Loaded on your Truck

INTOREX TXA-1200 Automatic Hydraulic Copy Lathe;Specifications: -- 1,200 mm (47-1/4") Max. turning length, 210 mm (8-1/4") max. turning diameter. -- Max. turning dia. with standard steady 90 mm (3.5"). -- (2) Hydraulic copiers. -- Max. size of square stock for turning with automatic feed 100 mm (3.9"). -- (3) Tool holder turrets. Hopper feed unit. -- (8) Head speeds in a range from 750 - 5,500 RPM. -- 6 HP or 7.5 HP Headstock spindle motor. -- 4 HP Hydraulic pump motor.

GRAINMATIC - CP-960, ...2-Head Wide Belt Sander42" Width cap.; Drum, Platen.Head Configuration:1st Head: Spiral rubber covered contact roll, 7-7/8" dia., 20 HP motor.2nd Head: Combination Head, spiral rubber contact roll, and finishing platen; 15 HP motor.Specifications: -- 36" W x 75" L abrasive belts with air jet tracking. -- Motorized part thickness adjustment with keypad entry and LED readout; 0" - 7" opening. -- Infeed & outfeed spring loaded rubber covered holddown rolls. -- Feed Motor: 3.5 HP -- Variable feed speed: 15 - 60 FPM.Equipped with & Features: -- Infeed emergency stop bar. -- Disc brakes on sanding head motors. --12" Infeed load area. --Volt meters on sanding head motors.NOTE: Some specs need to be verified.

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP. -- Feed Opening: 62" x 40". -- Dual Shaft with independent Driven Shafts -- Includes: Feed conveyor & discharge conveyor, extra feed hopper; an extra pulley roller that is magnetized for exit end of discharge conveyor (current pulley roller in use is nonmagnetic). -- includes: (2) Service manuals and catwalk structure.

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP.Model: 62-40 HTFeed Opening: 55″ x 38″Outside Dimensions: 130″ x 61″ X 43″Power Unit Dimensions: 96″ x 86″ x 96″ Weight is 20,000 Lbs.Cutter Diameter: 20.5″ at HooksPower Unit Open Loop, Skid MountedElectrical Power 200 HP (2 x 100) Hydraulic Flow 156 GPM; Rated Pressure 3000 PSIOperator initiated pushbutton controls,featuring Allen Bradley PLC Motor controls include primary disconnectwith short circuit protection, full load contactors, and electronic overload detectionControl power is derived from a single-phase transformer.All components are assembled and wired in a NEMA enclosure Heavy Duty Discharge Conveyor and mezzanine Stand

GRANUTECH-SATURN - BIG MAC, ...Used Car Crusher --Hydraulic cylinder completely rebuilt and re chromed --4-71 detroit with maybe 100 hours on a complete rebuild --Runs excellent put a extra set of dollies under it to move around yard --Solid crushing area no holes in floor or back wall. --Needs new tires to make dot mobile we moved on streched lowboy.Specifications: -- Widely recognized as the industry standard, "Big MAC" flatteners combine high performance and low maintenance characteristics in a mobile auto crusher. The result is an unparalleled record for equipment performance: more than 90% of all "Big MAC" flatteners ever made are still at work, with machines built in the 70’s still in operation today. -- Featuring Heavy-Duty “quick-set-up"; hydraulic cylinders that can be quickly and easily raised for operation or lowered for travel, the "Big MAC" flattener meets the needs of today's mobile scrap processor. Offering a wide, opening for easier loading and larger capacities, the "Big MAC" is built to perform. Multiple automobiles can be easily compacted into dense bundles, reducing both onsite storage demands and transportation costs.Key features and benefits include: -- Quick setup design -- Air Compressor -- Waste oil collection tanks -- 6-Cylinder Tier III engine -- 6" Cylinder rods -- Hydraulic landing gear -- Heavy-Duty push bumper

GRANUTECH-SATURN - BIG MAC, ...Used Car Crusher with RemoteSpecifications: -- Widely recognized as the industry standard, "Big MAC" flatteners combine high performance and low maintenance characteristics in a mobile auto crusher. The result is an unparalleled record for equipment performance: more than 90% of all "Big MAC" flatteners ever made are still at work, with machines built in the 70’s still in operation today. -- Featuring Heavy-Duty “quick-set-up"; hydraulic cylinders that can be quickly and easily raised for operation or lowered for travel, the "Big MAC" flattener meets the needs of today's mobile scrap processor. Offering a wide, opening for easier loading and larger capacities, the "Big MAC" is built to perform. Multiple automobiles can be easily compacted into dense bundles, reducing both onsite storage demands and transportation costs.Key features and benefits include: -- Quick setup design -- Air Compressor -- Waste oil collection tanks -- 6-Cylinder Tier III engine -- 6" Cylinder rods -- Hydraulic landing gear -- Heavy-Duty push bumper

GRANUTECH-SATURN - BIG MAC, ...Used Car CrusherSpecifications: -- Widely recognized as the industry standard, "Big MAC" flatteners combine high performance and low maintenance characteristics in a mobile auto crusher. The result is an unparalleled record for equipment performance: more than 90% of all "Big MAC" flatteners ever made are still at work, with machines built in the 70’s still in operation today. -- Featuring Heavy-Duty “quick-set-up"; hydraulic cylinders that can be quickly and easily raised for operation or lowered for travel, the "Big MAC" flattener meets the needs of today's mobile scrap processor. Offering a wide, opening for easier loading and larger capacities, the "Big MAC" is built to perform. Multiple automobiles can be easily compacted into dense bundles, reducing both onsite storage demands and transportation costs.Key features and benefits include: -- Quick setup design -- Air Compressor -- Waste oil collection tanks -- 6-Cylinder Tier III engine -- 6" Cylinder rods -- Hydraulic landing gear -- Heavy-Duty push bumper

GRASS - RAM, ...Drawer PressPneumatic Drawer Press used for pressing & inserting the GRASS SARGEN slide. -- Tabletop mount, foot pedal activation. -- NOTE: Machine is shown "as it is". Additional aluminum base frame was NOT shipped with this machine.

GRASS ECOPRESS P BORING MACHINE (HINGE): -- Specifications:Pneumatic Tabletop unit mounted on welded frame base; hinge boring w/GRASS inserter block,(1) 3-Spindle boring head for hinges, 1 HP motor. -- Drill unit & insertion head and (2) spring loaded hold-down cylinders operate pneumatically. Boring depth automatically sets to the material thickness being processed -- Complete With: &#9679 450 x 730 mm extruded aluminum framework table &#9679 LH & RH material side stops. -- Actual Model is GRASS ECOPRESS P

GRECON PJ 150/500 and PF 10-610 Finger Jointer and PressFinger jointer and Press systemSpecifications: -- Grecon Finger Joint System Including: Model PJ 150/500 Shaper -- Trim Saw 5 HP -- Shaper Head 30 HP -- Glue Application Head -- Timber Width 30 mm - 159 mm (1.2" - 6.25") -- Timber Thickness 12 mm - 80 mm (.5" - 3.15") -- Timber Length 250 mm - 1780 mm (9.84" - 70") -- Infeed Belt Conveyor 20" Wide X 34" LongAfter the Finger joint shaper: -- Manual Roll Conveyor with Rotation for Turning Workpieces 22" X 68" -- Outfeed Belt Conveyor 20" X 39" -- Driven Roll Conveyor 20" X 120" -- Powered Belt Conveyor Prior to Press 7" X 86"Model Press PJ 10/6100 Finger Joint Assembly Press: -- Maximum Pressing Length 240" -- Cut-Off Saw Motor 3HPNote: The machine will be reconditioned upon placement of order.

GREEN - 60" X 27', ...Steel Belt Type ConveyorSteel Belt Feed Conveyor -- Width: 60" -- Length: 27 Feet -- Lower Horizontal: 10-1/2 Feet -- Drop Off: 10 Feet -- Working: Fine -- Loaded onto your Truck

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

GREENMAX C100 SCREW COMPACTOR with Infeed ConveyorSpecifications: •Screw compression technology, Lower utility consumption, and higher efficiency•Able to deal with fish boxes that contain water•CE approved and comply with UL/CSA standards•A speed control device is designed to prevent EPS from melting•Reputable & High-quality components make the machine reliable and durable•SIEMENS control system guarantees easy and simple operation. --Capacity 220lbs/hr

GRIGGIO G 1100 Wide belt Sander2-Head, 1,100 mm (43") width cap. -- 1st Head: Rubber covered steel contact roll, duro 85, 220 mm diameter . -- 2nd Head: Rubber covered contact roll duro 50 -- 25 HP motor to drive both head. -- 43" x 85" abrasive belts, electropneumatic abrasive belt tracking, -- Conveyor belt feed, two speed from control panel at 15 and 30 FPM, 0.4/0.7 HP feed drive, automatic conveyor belt tracking, -- 1/8" - 6-1/2" motorized thickness adjustment with LED readout & 0.75Hp gearmotor drive. --Automatic positioning of the working table, rubber covered spring loaded pressure rollers, double infeed and outfeed rubber covered rolls, infeed panel "over-thickness" sensor. --Two suction dust hoods dia. 6" (150mm),

GRIGGIO SC-1500 Table Saw Specifications: -- 60" Cut cap.; 5 HP main motor & scoring motor with 3/4" dia. arbor and 9,000 RPM blade speed; external scoring blade adjustment. -- Features: -- 0° - 45° Tilting 1" dia. main saw arbor, 16" max. blade size, 5.1" max. depth of cut, single blade speed. -- Rip-cut fence assembly adjustable to 60" max.NOTE: Dimensions and weight are approximate.

GRIGGIO - "GT-4", Single End Tenoner4-Head Tenoner with: Sliding Table & Holddown. -- 1st Head: Trim saw, 10" dia. -- 2nd/3rd Head: Top & bottom tenon heads; 6.6 HP motor belt drives saw & tenons; 4" max. tenon length and 3/16" - 2-1/8" thickness. -- 4th Head: Cope head; 4.6 HP motor; 9-7/8" - 11-7/8" max. cope cutting circle; 3-15/16" max. tool length. -- Equipped with: 15" Long x 6" wide sliding table, travels 63" & tilts 0° - 30°; overhead holddown with tilting fence line. Also Included: -- Cutterhead for top/bottom tenon. -- Cutterhead for coping.

-In Auction- GRIZZLY GO502 18" Left-Hand Pneumatic Upcut Saw IMPORTANT BIDDING NOTE: This lot is also part of Lot #005, which is a bulk lot consisting of Lots #005A & #005B. If the individual bid amounts for Lots #005A & #005B total more than the bulk bid amount for Lot #005, then Lots #005A & #005B will be awarded to the high bidder of each lot. EQUIPMENT NOTE: Magnetic switch needs to be replaced. Specifications: - Max. cutting height 4" at 10" W. - Max. cutting width 12" at 2" H. - Work area 21-1/2” LR x 18-3/4” LR x 34-1/4" H. - Arbor dia. 1". - Blade speed 3,600 RPM. - Max. cut cycle speed 81 SPM. Equipped with: - 10 HP - 3,450 RPM - 220/440 V Dual voltage motor. - Cast-iron fence. - Built-in foot pedal control.

GRIZZLY G4185 BORING (HORIZONTAL) ---Price Negotiable---Make an Offer!--- 3-Spindle Horizontal Boring Machine, Will Accept 2-Spindle Boring Head - Maximum stock width 7-1/2” - Table size 9-3/4” x 15-3/4”, Maximum table height 35”, Table height adjustment 3-1/2” - Maximum bit capacity 9/16” (Right-hand threaded), Spindle travel adjustment 3”, Spindle speed 4,000 RPM, Maximum speed 12 SPM at 90 PSI - Hold-down force 600 Lbs. - 2 HP 3,450 RPM TEFC Direct drive motor - Pneumatic spindle travel - 2-1/4” Pneumatic hold-down - Pneumatic foot pedal control - Steel stand - Includes: GRIZZLY "G5953/3C-W20" 3-Spindle Boring Head, Maximum bit capacity 15 mm (0.59"), Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM