MGB 40X60 Reconditioned Plastic DensifierSpecifications: -- Drum size: 40" x 60" -- Main motor: 250 HP - WEG AC Direct drive -- Drum thickness: 3/8" -- Number of rotating blades: 1Equipped with: -- Gaylord height discharge -- WEG Motor soft start

48" Capacity at 90ø, 5" maximum depth of cut, 5 HP main motor, 16" diameter blade size, 1" arbor capacity, manual saw carriage feed, 4' X 8' table size.

-In Auction- MIDWEST AUTOMATION Countertop Saw, with Laser NOTE: Missing Routers. Specifications: -For cutting any combination of postformed, coved, or solid surface countertops. -Max. cutting length 48" at 45°. -Max. depth of cut 6". -Max. build-down thickness 2". -Max. backsplash height from bottom of deck 5". -Min. board length at 90°: 12". -Fixed miter positions (in degrees) 45°, 22.5°, & 15° Blade dia. 18", Arbor dia. 1". Equipped with: -4 HP Blade motor, 3/4 HP Carriage motor. Complete with: -Laser. -Approx. 16" W x 12' L Infeed & Outfeed Gravity Feed Roller Conveyors.

Automatically feeds, shapes & ejects Rosette blocks in sizes from 2-1/2" - 5" max. square blocks; 1.5 HP motor belt drives 2-7/8" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

Automatically feeds, shapes & ejects Rosette blocks in sizes from 5-1/2" - 8" max. square blocks; 3 HP motor belt drives 4-3/4" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

Horizontal Tilting Multi-Moulder with Verical Router System designed for curved casings, crowns, circles, ellipses and straight mouldings. -- Equipped with: (1) 1-1/4" Diameter Spindle, 6" max. width x 7" max. thickness cap., 7.5 HP spindle motor, 6,000 RPM spindle with reverse rotation, 6-1/2" max. cutting circle horizontal, 6" max. cutting circle tilted, 0° - 52° horizontal tilting arbor, hand wheel spindle height & spindle tilt adjustment. -- Variable feed speed from 0 - 30 FPM, DC feed feed motor; hand wheel adjustable thickness opening, 34" x 30" table, independently adjustable feed rollers, and mechanically adjusted fence. -- 3.25 HP, 5-speed Porter Cable router with 1/2" shank included. This allows easy insert & Channels on both straight and curved mouldings. -- Designed to use standard 4" dia. 2-knife cutterhead for 16°/60° 1/4" corrugated back knives, (1) supplied; includes operating manual & video, parts list and covered by (1) year warranty. -- Optional: ProScale digital readouts for height and tilt settings, please add $900 for each, or for the Optional 8’’ spindle and aluminum Cutter-head, please add $3,550

Automatic MIKRON "R-100" Rosette Maker for up to 5" diameter rosettes with magazine feeder. -- Automatically feeds, shapes & ejects Rosette blocks in sizes from 2-1/2" - 5" max. square blocks. 1.5 HP Motor belt drives 2-7/8" spindle cutterhead @ 7,500 RPM. -- OPERATION: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-Vmic holding fixture with overhead spring fingers. -- Cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- FEATURES: Table top unit with base, (1) Cutterhead equipped for standard 16°/60° 1/4" corrugated knife steel; and includes (1) sets of knives. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities.

Designed for curved casings, crowns, circles, ellipses and straight mouldings. -- Working dimensions: 6" wide x 7" thickness capacity. -- Spindle diameter 1-1/4" with cutterhead speed of 6,000 RPM. 6-1/2" max. cutting circle in horizontal position, 6" max. cutting circle tilted. -- Feed motor 7.5 HP variable speed 0 - 30 FPM. -- Tilting of spindle head 0° - 52°. -- Includes: Hand wheel for spindle height & tilt adjustment, mechanically adjustable fence for accurate and easy positioning. Axial adjustment. Floating work table 30" x 23". -- Linear tracking system guides the work piece smoothly and directly under the cutterhead, while keeping the workpiece flat. -- Includes (1) 4" dia. corrugated cutterhead. Operating video and manual, spare parts list and (1) year warranty. -- Additional options: Proscale digital readout for height and tilt setting .... add $900.00 for each.

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- Kohler 30 HP gasoline engine with electric start and including battery and fuel tank -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls, fixed and movable laser light.

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- 30 HP electric motor with 480 volt 3 phase magnetic starter included -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls

Miner B-53 STATIONARY Board Edger -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 14"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

MINNESOTA 24-8 Multi-Spindle Carving Machine.Specifications: -- Spindles/Capacity: (24) Spindles, 8" between centers & 72" length capacity. -- Motors: (12) 0.75 HP motors with (1) motor driving (2) spindles via flat belt. -- Features: Manual table elevation, motorized stock rotation, non-indexable head. -- Comes with: (2) Sets of carving tools (one medium and one fine). -- Includes: Tables for flat carving - to be confirmed (?).

MJ PR-4000 PRIMARY REDUCER Mobile ShredderSpecifications & Features: --The M&J PreShred 4000M is an easily transportable industrial waste shredder used for waste recycling and waste processing applications. It can handle many types of waste from municipal solid waste, industrial and commercial waste to bulky waste. --C15 700 HP Diesel Shredder with Remote --Metal, Wood, Tires Material Reducer to 10 inch --Hydraulic Conveyor and Magnetic Conveyor

MOAK - NO. 7, ...Spindle ShaperSpecifications: -- 1.5 HP motor, belt driven to spindle; 9,000 RPM spindle speed; 1" diameter spindle. -- Length of spindle above table is 5"; 3-1/4" vertical adjustment of spindle; 22" x 42" table; manual starter; 750 Lbs machine weight.

MOLDOW 184 MXN-324 Expandable Baghouse - 18 Total Modules with (4) Inlet Sections. Specifications. -- 72,000 CFM modular/expandable unit, currently with (14) Filter sections @ 5,000 CFM per section (24 bags per section). -- Approx 336 filter (8.6" dia. by 120" long) , 9,300 sq. ft. of total filter media, 7.75:1 air to cloth ratio Shell is under negative pressure allowing a high efficiency clean air fan.. -- Main Fan: Air Handling IAP A600 SWSI, Class IV, S/N 26862-1 rated at 90,000 CFM @ 1321 RPM, 16.0/20.3" SP & 290/308 BHP. Fan is A - Airfoil type wheel & is non-overloading powered by MARATHON "445Ta" belt driven TEFC 300 HP motor.. Currently fan inlet is connected with a 30" pipe. Regenerative Filter Cleaning: -- Each row of filter bags is cleaned continuously during operation by use of a regeneration carriage/trolley rides along top of filter bank) with a 4 KW (5.3 HP) high-pressure fan that sends air from the clean-air chamber back through the filter bags using nozzle pipes.Bags are fitted with an inner spring bracing. Special bag design reduces air velocity which increases air and dust loading considerably. -- Equipped with: Built-in bottom drag link chain which brings dust to one end where it is discharged through approx. 9" x 30" Rotary Air Lock (RAL). Currently a transfer fan moves dust to storage bin.. Summer/Winter Diverter/Abort Gate connected on outlet/return air line.Comes with: -- Relay Fan, IAP 911 RBO, to pneumatically convey collected dust at discharge of RAL. -- Platform with safety railings and ladder to access regeneration cabinet (return air plenum). -- Interior electrical control panel, support frame, and exterior ductwork. Single heavy sheet metal flanged rectangular return air pipe. Overall Dimensions: -- 45' Long by 12'-9" wide by 28.5' high (5.5' hopper to ground, 8' high hopper and 15' top section). -- Professional dismantling, rigging, transport and installation is available upon request.

MOLDOW Style, by ' NEU-JKF', Modular Baghouse with chain-sweep bottom feeding into a Rotary Air Lock (RAL) at the end of filter bank. -- General Data: Approx 35,600 CFM running at a 5:1 Air-to-Cloth Ratio. Total of 7,125 sq. ft. of filter area comprised of (14) modules each containing (27) filter bags. Filter bags are 8.5" dia. by approx. 96" long. All modules including inlets are fitted with filter bags. -- Main fans: Total of (3) Material Handling (MH)fans. (2) NORTHERN BLOWER Size 23, Des 5691, CL 3 Fans each belt driven by 60 HP TEFC motor. Fan inlets supplied by 26" dia. pipes. (1) type JK 25 HP MH blower. -- Filter Cleaning: Each module is supplied with a 2 HP approx. regenerative high pressure fans to sequentially back-flush the dust from the bags during operation and thereby falling into the continuous hopper with a drag-chain-sweep mechanism that rides along the bottom of hopper and feeds into the RAL. -- Return Air: All modules are ducted into one return air manifold pipe. -- Electrical Controls: CONQUEST free standing electrical control panel with visual light indicators for monitoring system status. Panel contains all start/stop pushbuttons and selector switches, and main disconnect. -- Includes: Steel Support frame with a walkway to the access doors which can act as explosion vents. Full set of polyester filter bags. -- Inquire for a cost for professional dismantling and transportation.

MOLLERS HSA Automatic Stretch Hooding SystemSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 2 HPFeatures: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automatically

MOLLERS HSA Automatic Stretch Hooding System with Corner Board ApplicatorSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 5 HP -- Corner board system: -- Automates the process of placing 4 corner boards. -- Each corner board magazine can hold up to 30 corner boards. -- Carousel design, servo driven corner board applicator allows for precise positioning during corner board retrieval and for proper staging.Features: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automaticallyApplications include: -- Pallets of smooth boxes or uneven containers that need to be secured on a pallet -- Cereal / grain based products -- Chemical / industrial -- Prepared / convenience foods -- Household goods -- Snack foods

MONGUZZI TRM 2L-2600 Double-Knife Veneer Guillotine. --102.4" (2,600 mm) Max. knife length, double-knife guillotine with motorized front knife adjustment. -- 3/8" - 20-3/8" (9.5 - 517 mm) Front to Back (material width) adjustment; 3-15/16" (100 mm) max. daylight opening. -- Microprocessor controlled knife opening with: Keypad entry & LCD readout, rear fence with auto-trim cut feature, slow & fast fence movement. -- Hydraulic pressure beam & knives can be activated separately & together. -- Hydraulic system with: 10 HP (7.5 kW) Pump and reservoir for knives & pressure beam activation. -- Complete with: Light beam Infrared safety zone. Actual model number is TRM 2L 2600.

MORBIDELLI PLANET HP CNC MACHINING CENTER (W/EDGEBANDING): -- Specifications:"Bridge Gantry" TWIN TABLE Routing & Edgebanding Center with (2) independent working tables: (2) Independent routing units mounted to the back side of the support beam.1) Independent edgebanding unit mounted to the front side of the support beam; it is possible under some circumstances for all (3) units to work simultaneously & totally independent of each other. -- Working Fields:Working field with both tables locked together; "X" axis 157.4" (4,000 mm); "Y" axis 70.8" (1,800 mm); "Z" axis stroke 15.7" (400 mm); max. material thickness when machining 6.6" (170 mm).Working field for each individual table: "X" Axis 63" (1,600 mm); "Y" axis 70.8" (1,800 mm); "Z" axis stroke 15.7" (400 mm); max. material thickness when machining 6.6" (170 mm). -- Edgebanding:Minimum internal radius when edgebanding 1.18" (30 mm) & minimum external radius when edge banding 0.39" (10 mm), depending on the type of banding material; max. material height when edgebanding 2.36" (60 mm). -- Positioning Speed:"X" & "Y" Axes 492 FPM (150 MPM); "Z" axis 82 FPM (25 MPM); "X" & "Y" axes uses a helical Rack & Pinion system, "Z" axis uses precision ball screws.All axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. -- Worktables:(2) Independent Worktables with: (8) Tubeless support rails; (4) rails with (4) pneumatic lifters each table; (2) vacuum pods per rail; manual positioning of rails & vacuum pods via LED positioning indicators & according to the parts processing requirements from the NC Control.(4) Pneumatic backstops; (2) pneumatic side stops & (2) pneumatic centerstops per worktable. -- Boring Units:(2) Independent boring units, each with: (1) 4 HP (3 kW) motor, 4,500/6,000 RPM; each head with (18) independent vertical boring spindles; (14) spindles in "X" axis & (4) spindles in "Y" axis (one shared spindle).Each head with: (6) Horizontal spindles, (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Routing Units:(2) Independent routing units, each unit with (1) 10 HP (7.5 kW) air cooled electro-spindles with "HSK 63" adaptors; programmable from 1,500 - 18,000 RPM;Each spindle with NC controlled "C" axis for 360° horizontal processing.(24) Automatic Tool Changers with: (1) 12-Position ATC toolholder mounted at each head for "on the fly" ATC (max. dia. tooling 180 mm when leaving open space on either side of the tool). -- The boring & routing heads are mounted to back side of the central support beam. -- Edgebanding Unit:(1) Edgebanding unit mounted to the front side of the support beam; NC controlled 360° operation for straight or contour edges with hot melt applicator and pressure rollers swiveling via a "C" axis;300 mm min. Part length for radius edgebanding; 0.4 - 3 mm PVC thickness and 0.4 - 2 mm veneer thickness.(1) 3-Coil magazine for automatic coil material feeding