AMERICAN BALER 5042-10-30 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 10" -- Main motor: 30 HP -- Charge opening: 50 x 42"

AMERICAN BALER 8043-HS-12-150 Wide-Mouth Auto Tie Horizontal BalerSpecifications: -- Main cylinder: 12" / Stroke: 95" -- Motor: (2) 75 HP -- Feed opening: 80" x 41.5" -- Ram Force: 379,290 Lbs -- Bale size: 43" x 43" x Variable -- Old OCC up to 14 tons per hourEquipped with: -- PLC Controls -- Twin oil heat exchangers -- Auto Tier has recently Installed Cutter Bar Assembly and twister banks -- Main Cylinder was Repacked within the last 2 years.Notes: Machine does need the following: -- Tension Cylinder Repack -- New Shear Knife and Ram Blade -- Both Hopper Windows -- NO Conveyor included.

BALEMASTER - 760AO, ...Horizontal Closed Door BalerSpecifications: -- Cylinders: (2) 6" -- Feed opening: 60" x 40" -- Bale size: 48" x 72" x 34" -- Main motor: 25 HPEquipped with: -- (4) Wire single-loop bale ties -- Heat exchanger -- Photo-eyeNote: Dog ear springs need to be replaced and a small leak by the motor; otherwise, in great condition.

BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck

BALEMASTER - EO-650, ...Horizontal Auto-Tie Baler Specifications: • 25 HP Motor• 8"; Main Cylinder• Hopper Opening: 46";x 50";• Bale Size: 48"; x 30"; x (variable)• Main Ram Face Pressure: 75psi• System Pressure: 2,000psi• Total Compression Force: 100,500 lbs

BALEMASTER 4550G-10 Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening --50 HP --10"; Cylinder --30"; x 40"; x Variable Bale

BALEMASTER 4025G-8 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 25 HP -- Feed opening: 32" x 27" -- Bale size: 30" x 36" x VariableEquipped with: -- 5 Wire TieNOTE: Shear not included.

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

BALEMASTER - AT, ...Automatic Tie Baler with ConveyorSpecifications: -- Cylinder: 10" -- Main motor: 50 HP -- Feed opening: 60" x 40" -- Infeed Conveyor: 44" W

BALEMASTER E-1290 Auto-Tie Horizontal Baler with AMERISHRED AMS-7500 Shredder/Conveyor/TipperBaler Specifications: -- Cylinder: 10" -- Bale size: 36" x 40" x variable -- Motor: 75 HPShredder Specifications: -- Cut: 5/8" -- Motor: 75 HPSystem equipped with: -- Enduraveyor Baler Feed Conveyor -- Discharge Conveyor -- Metering Feed Conveyor -- Cart Tipper

BALEMASTER EO-1700 Auto-Tie Horizontal BalerSpecifications: --Model: 5250 (EO-1700) --Mfg: 2003 --(2) 25HP motors --10" Cylinder --75" x 45" Feed Opening --Bale: 48"W x 40"H x Var L --Touch Screen --Air/Oil Cooler --Bale table --Boxes of bale wire included

BALEMASTER - HD-60, ...Closed Door BalerSpecifications: -- Main motor: 20 HP -- 8" Cylinder -- Bale size 48" x 30" x 60" -- Feed opening: 57" x 35"Equipped with: -- Touchscreen controls with ALLEN BRADLEY - Micrologix, ... PLC 7" QuickPanel -- Electrical disconnect switch installed on Baler -- Ground feed oversized hopper -- Totally enclosed fan cooled (TEFC) High-Efficiency motor -- Windowed Feed Chute Door with control circuit Interrupter (Limit Switch) -- Shear Blade -- Cycling eye mounted in the frame -- Low Oil Level & Hot Oil Temperature Sensors

BALETECH - 60X48, ...Full Pen Closed Door Baler Specifications: -- Bale size: 60" x 48" x 36" -- Feed opening: 60"; x 60"; -- OCC Bale weight:1,500 - 1,600 Lbs -- Conveyor width: 60" -- Main motor: 40 HPEquipped with: -- Shear bar -- Rubber cleated conveyor -- Full penetration

BOLLEGRAAF - HBC-80, ...Horizontal Auto-Tie Baler with ConveyorSpecifications: -- Bale size: 43" x 51" x 29" -- Motor: 60 HP -- Conveyor width: 60"Equipped with: -- Pre-press flap -- Fluffer -- KARL SCHMIDT MFG. Conveyor (belt will need to be replaced; is operational)

CP MANUFACTURING - OCC4, ...Fiber Screen Sorting SystemEfficient screening technology for separating 2D & 3D materials.Specifications: -- Capacity: 10 to 12 Tons per hourEquipped with: -- Double OCC -- Fiber screen -- Glass breaker -- Post sort -- Bunkers -- Mezzanines -- Misc. spare parts -- All manualsNOTE: Complete System with low hours!

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP 3/60/208/230/460 Volt Hydraulic Power Unit

CAN-PAK CD-3000 COMPLETE CAN DENSIFIER -- 25 HP motor --DIMENSIONS: • Height—9’2"; • Width—3’10"; • Length—13’5"; • Machine weight—8,000 lbs. • Conveyor weight—1,000 lbs. • Conveyor: 11’5"; high x 20-1/2"; wide x 13’ long --SPECIFICATIONS: • 25 HP power unit • 460 volt 3 phase wiring • Solid state programmable controller • Thermostatically controlled hydraulic oil cooler • 1 cubic yard hopper • 120 gallon hydraulic tank • 20-1/2"; wide infeed conveyor with 3/4 HP motor, direct drive gear reducer, magnetic head pulley and steel reject chute

CP MANUFACTURING - S100-6-LH-US, ...Screens -- (1) System of (2) Screens -- Very lght Use -- Ordered as part of a Single-Stream Sort System that was designed to run 10 Tons/Hr -- 1-Feed Conveyor -- Each: 14,500 Lbs -- Loaded onto your Truck

Cram-A-Lot HX-60, ...Closed Door Baler with Cart Dumper and Infeed ConveyorSpecifications: --The CRAM-A-LOT HX-60 HH & HX Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. --The CRAM-A-LOT® HH & HX Series Balers are built with extra heavy-duty construction and are ideal for warehouses and recyclers who deal with large quantities of corrugated and paper products.This machine is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered feed conveyors and cart dumper systems efficiently control baler feed rates for optimum performance in a complete baling system.Standard features include:ANSI Z245.5 Compliant - All compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control PanelsUHMW Ram Shoes - Adjustable to assure straight tracking and readily replaceable, should the need ariseOil Sight Gauge - Oil level at a glanceOil Filter - Replaceable spin-on cartridge to keep your oil cleanHeavy Duty Controls - NEMA 4-rated pushbutton controls with key-lockable start switchAutomatic Single-Cycle Operation --Bale Size: 60" x 30" x 40" -- Bale Weight Up To (OCC) 1400 Lbs --Throughput (OCC) 2.5 bales /Hr -- 7" Cylinder

(3) CRAM-A-LOT - SCR-T2-34, ...34 Yard Self-Contained CompactorsLot of (3) Specifications: -- Cylinder: (2) 4" -- Main motor: 10 HP -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm) -- Capacity: 34 Yard -- Ram force: Up to 24 tons