BÜTFERING SWT 325 QX - 2-Head Wide Belt Sander for lacquer, veneer & solid wood sanding.1,350 mm (53") working width, equipped with (1) Cross belt "Q", (1) BÜTFERING patented Combination Head "X" Roller/Pad with inner chevron belt.This configuration allows for high-quality sanding of various surfaces, like: &#9679 Fine sanding & calibrating of solid woods &#9679 Lacquer sanding with grit sizes P 120 - 800 &#9679 Preparation for high-gloss surfaces1,350 mm (53") working width, equipped with (1) Cross belt "Q", (1) BÜTFERING patented Combination Head "X" Roller/Pad with inner chevron belt.Head Configuration: 1st Head: Cross belt sanding unit "Q". With inner chevron belt. Infinitely variable abrasive belt speed 2 - 16 m/Sec (7 - 53 FPS). Segmented fine sanding pad, electro-pneumatically controlled by BÜTFERING EPS system, with 54 segments, each 25 mm (1") wide. Abrasive belt size 150 x 4,700 (5.9"- 185"). Driven by 13,5 kW (18 HP) motor.2nd Head: BÜTFERING patented Combination Head "X" Roller/Pad with inner chevron belt. Consisting of Contact Roller, rubberized, spirally grooved, and Segmented fine sanding polishing platen with inner chevon belt. With 54 segments, each 25 mm (1") wide, electro-magnetically controlled. Infinitely variable abrasive belt speed 2 - 12 m/Sec (7 - 40 FPS). Abrasive belt size 1,370 x 2,620 mm (54" x 103"). Driven by 20 kW (27 HP) motor.Equipped with BÜTFERING MPS - Magnetic Pad System with 3 sensors per segment. Dynamic sanding pressure control ensures that equal sanding pressure is applied on the entire workpiece, with compensation on the leading & trailing edges. This sytem will allow up to 2 mm (1/16") in thickness variations.Total repeatability. High-precision machined segments are wear- & maintenance-free. For very intricate sanding tasks the sanding pressure of every segment can be individually controlled with the BÜTFERING IAC - Individual Actuator Control system.Both heads equipped with: Electronic abrasive belt tracking. Pneumatic abrasive belt tension. Air jet belt cleaner, activated by part size. Feed system: -- Constant pass line 900 mm (35.4"). -- Vacuum conveyor bed assembly. Divided in two sections, on each section the vacuum power can be adjusted. -- Conveyor belt feed speeds 2,5 - 13 m/Min (8 - 43 FPM). Driven by 0,55 kW (0,75 HP) motor. -- Part thickness 3 - 160 mm (1.2" - 6.3"). -- Motorized thickness adjustment driven by 0,25 kW (0,35 HP) motor. -- Automatic thickness adjustment. -- Automatic electronic conveyor belt tracking. -- Extractable support table with idle rollers at infeed. -- Support roller and support table at outfeed of the machine.Machine management system: VSE Control System with Color Touch Screen for all major machine operations, programming of parameters and storage of 1,000 sanding programs, supervision of major machine functions. Visual display of the work process. Error diagnosis. Fully automatic start sequence of the main motors. Recor

BUTFERING TSBC213 CCC/C Line wide belt sander53" Width cap , Combination Head, Combination HeadSpecifications -- Wide Belt Sander, Model Optimat SBC 213 CC/C-Line -- Sanding width: 1350mm -- Working height: 900mm constant pass -- Workpiece thickness. 150 mm -- Abrasive belt width: 1370 mm -- Abrasive belt length: 1900 mmHead Configuration1st Head -- Abrasive belt drive: ( Drum )1 speed 25.3 kW -- Abrasive belt speed:18 m/s -- Contact roller diameter 140mm -- 2nd Head -- Abrasive belt drive: 3 speed. 2.7/7.5/15 kw -- Abrasive belt speed: 4.5/9/18 m/s -- Contact roller diameter. 140mm Equipped with & Features -- Infeed drive infinitely variable 1,5 kW2.5-13 m/min. -- Cleaning brush

BUTFERING SKO-113-C WIDE BELT SANDER53" Width cap. Combination Head. Combination sanding head with steel contact roll & electronically controlled segmented platen.Specifications: -- Contact roll height position with programmable control. -- Platen consists of 35 mm wide segments designed to conform to part size to minimize sand throughs. -- 53" Wide vacuum bed with 3 kW vacuum pump motor assembly. -- 53" x 75" Abrasive belt with air tensioning and electronic abrasive belt tracking,Equipped with & Features: -- Out-feed rotary panel cleaning brush. -- Touch screen program control with storage up to (125) programs. -- Conveyor belt feed 2 HP motor, Variable feed drive from 8 - 43 FPM. -- Vacuum conveyor bed assembly with suction fan and motor assembly. -- Infeed & outfeed rubber-covered hold-down rolls. -- Programmable part thickness opening 1/8" - 5-7/8", automatic conveyor belt tracking -- Infeed roller extension, electric brake on abrasive belt, -- Emergency stop button, -- Motor load meter, and magnetic controls.

BUTFERING - OPTIMAT STO 311 RRL, ...3-Head Wide Belt Sander43" Width cap., Drum, Drum, and Platen.Head Configuration:1st Head: 7" Steel spiral contact drum, 29.5 HP motor.2nd Head: 7" Rubber covered drum, 25 HP motor.3rd Head: Combination Style Head with Grooved Rubber-Covered Drum and Air-Cushion Pad; 3rd Head Motor: 16.7/21.5 HP.Specifications: -- 43" x 75" Abrasive belts, electronic abrasive belt tracking. -- Conveyor belt feed with variable feed speed from 8 - 43 FPM. -- Automatic conveyor belt tracking. -- Infeed & outfeed spring-loaded rubberized holddown rolls. Equipped With & Features: -- 1/8" - 5-1/2" Motorized thickness adjustment, "quick-set" automatic thickness adjustment with LED readout. -- Infeed panel "over-thickness" sensor. -- Outfeed rotary panel cleaning brush Infeed & outfeed emergency stops. -- Safety interlocks on all doors. -- Roller infeed conveyor extension, -- Motor load meters and main motor electronic brakes.

BUTFERING - OPTIMAT SCO 413 RRRR, ...Top Head Wide Belt Sander (...part of line with SX-012681 Profiline 3-Head Bottom Sander)Top 4-Head, 53" Width Capacity Wide Belt Sander with (4) Drums (Rollers).Head Configuration: -- 1st Head: Steel Contact Roll, 240 mm (9-1/2") dia., 22 kW (30 HP) motor. -- 2nd Head: Rubber covered Contact Roll, 85 Shore, 240 mm (9-1/2") dia., 22 kW (30 HP) motor. -- 3rd Head: Rubber covered Contact Roll, 65 Shore, 320 mm (12-1/2") dia., 22 kW (30 HP) motor; Rotation with or against feed direction. -- 4th Head: Rubber covered Contact Roll, 35 Shore, 320 mm (12-1/2") dia., 18.5 kW (25 HP) motor. -- All Heads with servo positioning of Contact Roller via precision motor to 1/100 mm, with possibility to store different values in the Terminal.Features & Specifications: -- Outfeed Rotary Panel cleaning brush with abrasive grit, 5.5 kW (7.5 HP) motor; 950 mm (37") Section of free-standing power driven infeed roller track; 54" x 103" Abrasive belts and electronic abrasive belt tracking; all heads with Servo driven grit compensation and motorized positioning; Abrasive belt air-jet blowers on all heads; Automatic head locking for fast abrasive belt change. -- Vacuum Conveyor belt feed with variable feed speed 5 - 25 MPM (16-1/2 - 82 FPM); automatic conveyor belt tracking, infeed & outfeed spring loaded rubberized holddown rollers. -- Constant passline of 900 mm (35-1/2") by adjustment upper machine frame via (4) large dia. threaded spindles. -- Color touchscreen control with (1,000) programs, 1/8" - 5-1/2" motorized thickness adjustment, "quick-set" automatic thickness adjustment with LED readout; infeed panel "overthickness" sensor.Complete with: -- Infeed & outfeed emergency stops, safety interlocks on all doors, roller infeed Conveyor extension, motor load meters, and electronic brakes for all sanding head motors. -- Operator and Maintenance manuals (in Spanish); spare parts drawings, spare parts list, and wiring diagram.NOTE: -- BUTFERING "PROFILINE SUR" Bottom Sander and "OPTIMAT SCO" Top Sander [SX-012681] are: Offered as a Complete System/Line with Infeed & Transfer Connect; one common Control for both machines to operate as line. - Copy of original quote with detailed specifications is available upon request.Asking Price with this "SX-012684" listing is for the Top Head Sander only - Open to reasonable offers.

CAM-WOOD EGS-636 Oscillating Edge Sander with End Table.Features & Specifications:Sandpaper automatically oscillates up & down so it will not overheat to get longer life usage and better finish result. -- 13" x 18" End table mounted at left side of the machine to use as contour sanding. -- Heavy gauge sheet metal cabinets stand and table for heavy work. -- The height of front & back table is adjustable for 5". -- Easily adjustable belt tension device. -- Twin main working tables can be tilted up to 45 degrees reducing material burning and promotes longer belt life. -- The graphite pad lubricates the sanding belt and allows the belt to run cooler and smoother. -- All sealed long-life ball bearings and rubber contact motor pulley. -- Several typical profile blocks can be used for the edge profile sander. -- Powerful 5Sandpaper automatically oscillates up & down so it will not overheat to get longer life usage and better finish result. -- Several typical profile blocks can be used for the edge profile sander. -- Powerful industrial 5 HP motor for durability usage. -- Overload protect magnetic switch. -- 6" x 117" Belt size with a Working size of 6" x 36". -- Machine weight 760 Lbs.

CAM-WOOD WS-NDA600 Planer / Sander Combination(3) Heads and 25" width capacity. Includes (1) Planer Head (1) Contact Drum and (1) Dual Purpose Sanding HeadFeatures: -- This machine is specially designed to tail heavy materials such as glued panels, bend boards, rough lumber, etc. -- Anti-kickback fingers are mounted at the infeed of the machine to provide safety for the operator. -- In case of insufficient air pressure, the machine brakes automatically for safety. -- Non-reversible pressure roller runs in a single direction giving additional safety from panel kickback. -- Hold-down plate is hard-chromed for maximum smoothness and wear resistance.Head Configuration: -- The first head is a knife planer with 15 HP motor. The spiral planer cutterhead is fitted with 14 x 14 MM, four-sided throw-away carbide knife inserts, providing superior chip removal rate, minimum noise, and smooth finishes. Changing knife inserts is conveniently done without removing the cutterhead. Replacement inserts are $3.40 each -- The second head is a contact drum powered by a 15 HP motor and accepts a 25" x 75" abrasive belt. -- The third head runs a combination drum and platen arrangement, also driven by a 15 HP motor, belt size is 25" X 75" -- Motorized elevation of conveyor table (micro-computer controlled with digital readout), accurately displays the position of the conveyor table and automatically moves to the thickness setting for planning and sanding. -- Panel cleaning brush; mounted at outfeed of the machine; used to remove dust from a board or panel when using fine grit sandpaper.Technical Specification: -- Working width 25" -- Working thickness up to 5" -- Minimum working length 12-1/2" -- Feed speed 10 to 53 FPM driven by 3 HP motor -- Table raised and lowered by 1/2 HP motor

CAM-WOOD WS-DA2560 Wide Belt Sander, (2) HeadsWith the two-head 25" width capacity wide belt sander, you can accurately, and heavily sand your stock with the first drum head and with the second combination head you can give an unlimited fine finish. -- Rugged heavy-duty sheet metal construction designed for durability usage -- Powerful industrial motors drive sanding and auto infeed smoothly. -- Infeed and outfeed are spring-loaded hold-down rollers to ensure positive feeding without sanding marks. -- Combination platen & drum sanding head for best sanding choice such as: -- With the platen up, the sander functions as a drum-only machine, for sanding with a 40 ~ 100 grit belt. -- With the platen and drum same level, intermediate and final finishing is possible, using a grit of 120 ~ 180. -- With the platen down (below the drum), used for the fine finishing or lacquer sealer sanding, with 180 ~ 600 grit.Head Configuration1st Head : 15 HP Drum2nd Head : 10 HP Combination HeadSpecifications: -- Max. Working Width 25" Max. -- Working Thickness 5" -- Min Working Length 12½" -- Sanding Belt Dimensions (W x L) 25" x 60" -- Dust Collection Hood (Dia x Holes) 5" x 2 -- Main Motor 15, 10 HP; -- Feed Motor 2 HP -- Table Raising / Lowering Motor ½ HP -- Var. Feed Speed (FPM) 20 ~ 80 20 -- Working Air Pressure 6 CFM -- Exhaust Volume Require 1800 CFM -- N.W. 4400 Lbs - G.W. 5000 LbsEquipped with and Features -- Sanding platen with a quick release and lock down design for easy removal or loading of graphite platen. -- Computerized thickness adjustment control with accurate digital readout; key in the size desired and automatic table movement for sanding thickness within 0.005"; accuracy. -- Large-size diameter contact drum is dynamically balanced, rubber-covered spiral grooves designed to provide considerable advantages for the effective removal of material. -- Special rubber feed belt for safe non-slipping, transporting the workpieces. -- The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is detected by an electric eye sensor, which in turn controls the air supply to the position via solenoid value. Also, one limit switch is located on each end of the top roller of the sandpaper for quick stop in case of belt breakage. -- The main table is designed with a convenient leveling adjustment which ensures greater stability with excellent tolerance providing a variable range from 0"; ~ 5"; sanding thickness. -- (4) Heavy-duty jack screws power conveyor table elevation.

CAM-WOOD WS-DA3760 Wide Belt Sander, (2) HeadsWith the two-head wide belt sander, you can accurately, and heavily sand your stock with the first drum head, and with the second combination head, you can give an unlimited fine finish.Application: -- Rugged heavy-duty sheet metal construction designed for durability usage. -- Powerful industrial motors drive sanding and auto infeed smoothly. -- Infeed and outfeed have spring-loaded hold-down rollers to ensure positive feeding without sanding marks. -- Combination platen & drum sanding head for best sanding choice such as: --With the platen up, the sander functions as a drum-only machine, for sanding with a 40 ~ 100 grit belt. -- With the platen and drum same level, intermediate and final finishing is possible, using a grit of 120 ~ 180. -- With the platen down (below the drum), used for the fine finishing or lacquer sealer sanding, with 180 ~ 600 grit.Head Configuration:1st Head : 20 HP Drum2nd Head : 15 HP Combination HeadSpecifications: -- Max. Working Width 37" Max. -- Working Thickness 5". -- Min Working Length 12½". -- Sanding Belt Dimensions (W x L) 37" x 60". -- Dust Collection Hood (Dia x Holes) 6" x 2. -- Main Motors 20 and 15 HP. -- Conveyor bed Feed Motor 2 HP. --Table Raising / Lowering Motor 1/2 HP -- Variable Feed Speed 20 - 80 FPM. -- Working Air Pressure 6 CFM. -- Exhaust Volume Require 2,400 CFM. -- N.W. weight 5,100 Lbs.Equipped with and Features: -- Sanding platen with a quick release and lock down design for easy removal or loading of graphite platen. -- Computerized thickness adjustment control with accurate digital readout; key in the size desired and automatic table movement for sanding thickness within 0.005"; accuracy -- Large size diameter contact drum is dynamically balanced, rubber-covered spiral grooves designed to provide considerable advantages for the effective removal of material. -- Special rubber feed belt for safe non-slipping, transporting the workpieces. -- The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is detected by an electric eye sensor, which in turn controls the air supply to the position via solenoid value. Also, one limit switch is located on each end of the top roller of the sandpaper for quick stop in case of belt breakage. -- The main table is designed with the convenient leveling adjustment which ensures greater stability with excellent tolerance providing a variable from 0"; ~ 5"; range sanding thickness. -- (4) Heavy-duty jackscrews power conveyor table elevation.

CAM-WOOD A-3760X Combination Head Wide Belt SanderSpecifications: -- 36" Width cap. - Combination Sanding head with rubber-covered contact roll and adjustable finishing platen. 20 HP main drive motor. -- 37" X 60" Abrasive belts, pneumatic abrasive belt tensioning. -- 0" - 5" Feed through bed adjustment, Digital thickness set-up via 0.5 HP motor power elevation for thickness opening. -- Variable conveyor feed speed from 20 to 60 FPM, 2 HP feed motor. -- 5" Max. working thickness, 7" min. working length, -- Double Infeed & outfeed spring loaded holddown rolls.Complete with: -- Magnetic controls, 6" dia. dust collection hood, and safety shutoff. - 1,500 CFM Dust collection required.

CAM-WOOD WS-DA4375X DUAL HEAD WIDE BELT SANDERWith the two-head wide belt sander, you can accurately, heavily sand your stock with the first drum head, and with the second combination head, you can give an unlimited fine finish.Application: -- Rugged heavy-duty sheet metal construction designed for durability usage. -- Powerful industrial motors drive sanding and auto infeed smoothly. -- Infeed and outfeed have spring-loaded hold-down rollers to ensure positive feeding without sanding marks. -- Combination platen & drum sanding head for best sanding choice such as: --With the platen up, the sander functions as a drum only machine, for sanding with a 40 ~ 100 grit belt. -- With the platen and drum same level, intermediate and final finishing is possible, using a grit of 120 ~ 180. -- With the platen down (below drum), used for the fine finishing or lacquer sealer sanding, with 180 ~ 600 grit.Head Configuration:1st Head : 30 HP Drum2nd Head : 20 HP Combination HeadSpecifications: -- Max. Working Width 43" Max. -- Max. Working Thickness 5". -- Min Working Length 12½". -- Sanding Belt Dimensions (W x L) 43" x 75". -- Dust Collection Hood (Dia x Holes) 6" x 2. -- Main Motors 30 and 20 HP. -- Conveyor bed Feed Motor 3 HP. --Table Raising / Lowering Motor 1/2 HP -- Variable Feed Speed 20 - 80 FPM. -- Working Air Pressure 6 CFM. -- Exhaust Volume Require 3,800 CFM. -- N.W. weight 6,160 Lbs.Equipped with and Features: -- Sanding platen with a quick release and lock down design for easy removal or loading of graphite platen. -- Computerized thickness adjustment control with accurate digital readout; key in the size desired and automatic table movement for sanding thickness within 0.005"; accuracy -- Large size diameter contact drum is dynamically balanced, rubber covered spiral grooves designed to provide considerable advantages for the effective removal of material. -- Special rubber feed belt for safe non-slipping, transporting the workpieces. -- The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is detected by an electric eye sensor, which in turn controls the air supply to the position via solenoid value. Also, one limit switch is located on each end of the top roller of the sandpaper for quick stop in case of belt breakage. -- Main table designed with the convenient leveling adjustment which ensures greater stability with excellent tolerance providing a variable from 0"; ~ 5"; range sanding thickness. -- (4) Heavy-duty jackscrews power conveyor table elevation.

CAM-WOOD WS-NA600X Planer/Sander Equipped with: -- (2) Heads with 25" width capacity planer head and combination sanding head -- This machine is specially designed for take-off heavy materials such as glued-up panels, bend boards, and rough lumber. -- The first head is a knife planer head, with 15 HP motor. The spiral planer cutterhead is fitted with 14 x 14 MM, four edge throw away Tungsten Carbide knife inserts, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect. Changing knife inserts are conveniently done without removing the cutterhead. -- The second head is a combination of drum and platen driven by a 15 HP motor, belt size 25" X 75" -- Anti-kickback fingers, mounted at the infeed of the machine, these anti-kickback fingers provide a safety guard for the operator.Features: -- Insufficient pressure protection, in case insufficient working air pressure occurs, the machine brakes automatically for safety guard.Irreversible running of pressure roller, runs a single direction only, giving an additional safety guard for panel kickback. -- Motorized elevation of conveyor table (micro-computer controlled with digital readout), it accurately displays the position of the conveyor table and automatically moves to the setting thickness for planning, sanding. -- Panel cleaning brush roller; built-in at the outfeed end of the machine, the cleaning brush roller cleans the fine sanding dust off the sanded panel. -- Hold-down plate is hard chrome treated for maximum wear resistance.Technical Specification: -- Working width 25" -- Working thickness up to 5" -- Minimum working length 12 1/2" -- Feed speed 10 to 53 FPM driven by 3 HP motor -- Table raised and lowered by 1/2 HP motor

CAM-WOOD EGS-108 Oscillating Edge Sander with End Sanding Kit.Features & Specifications: -- 6" Wide x 108" long abrasive belt. -- 6" x 40" Graphite covered platen. -- 3 HP Single-phase motor w/magnetic switch. -- 6" Diameter drive pulley. -- 7-3/4" x 37" Front table with a 6" vertical adjustment. -- End table for radius work with a 6" vertical adjustment. -- Heavy laminated tables, fabricated steel base and swing-away dust hood.

CAM-WOOD WS-NA900 Planer Sander -- 2 Heads with 36" width capacity planer head and combination sanding headFeatures: -- This machine is especially designed for tale off heavy materials such as glue panel, bend board, rough lumber. -- The first head is a knife planer head, with 25 HP motor. The spiral planer cutterhead is fitted with 14 x 14 mm, four edge throw away Tungsten Carbide knife inserts, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect. Changing knife inserts are conveniently done without removing the cutterhead. -- The second head is a combination of drum and platen driven by a 20 HP motor, belt size 37" x 75". -- Anti-kickback fingers, mounted at the infeed of the machine, this anti-kickback finger gives a safety guard for the operator. -- Insufficient pressure protection, in case insufficient working air pressure occurs, the machine brakes automatically for safety guard.Irreversible running of pressure roller, runs a single direction only, giving an additional safety guard for panel kickback. -- Motorized elevation of conveyor table (micro-computer controlled with digital readout), it accurately displays the position of the conveyor table and automatically moves to the setting thickness for planning, sanding. -- Panel cleaning brush roller; built at outfeed end of the machine, this cleaning brush roller cleans the powder on the sanded panel. -- Hold-down plate is hard chrome treated for maximum wear resistance.Technical Specification: -- Working width 36". -- Working thickness up to 5". -- Minimum working length 12-1/2". -- Feed speed 10 to 53 FPM driven by 3 HP motor. -- Table raised and lowered by 1/2 HP motor.

CAM-WOOD A-2560 Single Head, Wide Belt Sander;Features & Specifications: -- 24" Width cap. - sanding head with a rubber covered contact roll and adjustable finishing platen, 10 HP motor. -- 25" x 60" Abrasive belts, pneumatic abrasive belt tensioning. -- 0" - 5" Feed through bed adjustment, 0.5 HP motor power elevation for thickness opening. -- Variable conveyor feed speed from 17 - 51 FPM, 1 HP feed motor. -- 5" Max. working thickness, 7" min. working length, -- Double Infeed & outfeed spring loaded holddown rolls.Complete with: -- Magnetic controls, 6" dia. dust collection hood, and safety shutoff. - 1,500 CFM Dust collection required. Optionall: 10 HP Single Phase motor

CAM-WOOD A-3775 Single Head Wide Belt SanderSpecifications: -- 36" Width cap. - Combination Sanding head with rubber-covered contact roll and adjustable finishing platen. 20 HP main drive motor. -- 37" X 75" Abrasive belts, pneumatic abrasive belt tensioning. -- 0" - 5" Feed through bed adjustment, Digital thickness set-up via 0.5 HP motor power elevation for thickness opening. -- Variable conveyor feed speed from 20 to 60 FPM, 2 HP feed motor. -- 5" Max. working thickness, 7" min. working length, -- Double Infeed & outfeed spring loaded holddown rolls.Complete with: -- Magnetic controls, 6" dia. dust collection hood, and safety shutoff. - 1,500 CFM Dust collection required.

CAM-WOOD - AM-52, ... 2-Head Wide Belt Sander w/53" cap.53" Width cap.; Drum, Drum.Head Configuration:1st Head: Steel contact roll, 9-1/2" dia.2nd Head: Rubber contact roll, 8-1/2" dia. Specifications: -- 1st Head: 40 HP Motor. --2nd Head: 30 HP Motor. --Width cap.: 53". -- Min. working width: 20". --Max. thickness: 0.118 - 4.331". -- Feed speeds: 20 - 100 FPM. -- Feed motor: 5 HP. -- Belt size: 53" x 86".

CAM-WOOD EGS-948 Oscillating Edge Sander with End Table.Features: -- Sandpaper automatically oscillates up & down so it will not overheat to get longer life usage and better finish result. -- 13" x 18" End table mounted at left side of the machine to use as contour sanding. -- Heavy gauge sheet metal cabinets stand and table for heavy work. -- The height of front & back table is adjustable by 5". -- Easily adjustable belt tension device. -- Twin main working tables can be tilted up to 45° reducing material burning and promotes longer belt life. -- The graphite pad lubricates the sanding belt and allows the belt to run cooler and smoother. -- All sealed long-life ball bearings and rubber contact motor pulley. -- Several typical profile blocks can be used for the edge profile sander. -- Powerful industrial motor for durability usage. -- Overload protect magnetic switch.Specifications: -- Sanding Belt Size: 9" x 142". -- Main Working Table (2 Units) 10-1/2"; x 48";. -- Side Working Table: 13"; x 17";. -- Belt Linear Speed: 3,230 FPM. -- Belt Drive Motor: 7-1/2 HP, 3 Ph. -- Oscillating Motor: Belt drive motor. -- Net Weight. 1,260 Lbs

CANTEK LBS300-5S 3-Sided Moulding Sander5-Head Brush Sander, 11" width and 4" height cap., for 3-sided sanding of linear profiled material. Head Configuration: -- (2) Sets of Top abrasive brushing heads with variable speed adjustment by inverter, 0.75 HP (0.55 kW) motor each. -- (1) Left side head, adjustable up/down, in/out, and can be set on an angle, 0.5 HP (0.37 kW) motor. -- (1) Right side sanding head which can be adjusted up/down and in/out, 0.5 HP (0.37 kW) motor. -- (1) Left side sanding head is adjustable up/down, in/out, and can be set on an angle, 0.5 HP (0.37 kW) motor. -- Brush head spindle speed adjustable from 200 - 1,200 RPM. -- Variable feed speed of 6.5 - 27 FPM, adjustment by frequency inverter.Features & Specifications: -- Min. workpiece length 26", min. workpiece thickness 3/8". -- 0.25 HP (0.18 kW) Conveyor motor, 0.33 HP (0.25 kW) moving brush head motor. -- Depending on the application, brushing heads can be cleaning brushes or abrasive cloth brushes. The dovetail pocket design allows for easy abrasive/brush replacement. -- Centralized control panel for operator convenience integrated into machine base.Also available in 460V, 3-Ph, 60 Cy (factory order only – app 10-12 weeks)

CANTEK C 371 WIDE BELT SANDER1-Head, 36" width cap., 20 HP motor, 5" motorized opening can be adjusted with the handwheel or automatically with the pre-set a the machine control. -- Single abrasive head with combination drum/adjustable platen using a 37" x 60" belt. -- 1 HP variable speed mechanical drive on the conveyor allows feed speeds of 15 to 60 FPM. The conveyor bed has (4) heavy support jacks. -- The pre-set controls have an LED display of the position of the bed opening along with AMP meter and start/stop buttons.