VESTIL EHLT-2464-2-55 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 2,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 24" x 64". -- Lowered height 7", raised height 55". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

VESTIL EHLT-4896-4-56 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 4,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 48" x 96". -- Lowered height 8", raised height 56". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

VESTIL - HYDRAULIC BOX DUMPER --230 Volt, 3-Phase, 3.1 Amp. -- Previously used to feed a baler

VESTIL - DRUM CRUSHER --Crushes 55-gallon steel drums; 25-second crush and retract cycle --Crushes up to 250 drums per week on 3-phase power supply --Safety interlock prevents motor operation when door is open --Aluminum drip pan catches excess liquid

VICKERS 60 HP Hydraulic Power PackHere's a Hydraulic Power Pack with all the bells and whistles. VICKERS pump and valves and a SENTINEL tank. Hydraulic Power Pack Includes: -- Variable volume, pressure compensated, piston pump. -- Capacity - 8 cu. in. / rev. -- Pressure rating - 4,000 psi. -- Driver - 60 HP Electric motor 1,750 RPM. -- Reservoir - 200 gal. -- Kidney loop - Gear pump w/ filter. -- Air-cooled heat exchanger. -- Return line filter. -- Liquid lever switch and temperature switch. -- Fluid inspection window.NOTE: This item was installed earlier but never used. The year of manufacturing is approximate.

VIET - S2-321-HP/KRT, ...3-Head Planer Sander3-Head Planer/Sander 43" with: Planer, Drum and Combi-HeadSpecifications: -- Max. operating width: 1,100 mm (43") -- Min/Max thickness: 3 mm - 160 mm (1/8" to 6.3") -- Working Height: 900 mm (36") -- Belt sanding dimension: 44" x 103" -- Feed speed: 3 - 16 MPM (9-3/4 - 52 FPM) -- Rubberized drum: 30 HP Motor -- Combination head with drum & platen; driven by the same motor as the sanding drum -- Extended infeed & outfeed roller -- Planer head with helical insert knives: 30 HP Drive motor

VIET - S211 R+ KRT, 2-Head Wide Belt Sander43" Width. cap.: Drum and Combination head.Head Configuration:1st Head: 160 mm 6.3″ Helical grooved rubber drum. 25 HP motor2nd Head: 160 mm(6.3") Helical grooved rubber drum with a platen combination head., 25 HP motorSpecifications: -- Each heads are powered by 25 HP motor. -- The heads can be programmed to pneumatically raise & lower along with the platen and do (3) sanding combinations (with the twist of a button). -- Digital height readout along with a calibration unit to the left side of the conveyor. -- Conveyor speed is controlled via a variable frequency drive 2.5 HP . --Max width: 43″. -- Max. height: 6-1/4". -- Variable speed conveyor belt drive from: 3 - 16 MPM (11 - 52 FPM).Equipped with & Features: -- Both heads equipped with: 1,130 x 1900 mm (44-1/2" x 75"). -- Roller & pressure shoe holddowns. -- Pneumatic tension of sanding belts and feed conveyor. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.. NOTE: This is an extremely low hour 2016 BIESSE Viet S1 dual head 43″ calibrating Wide Belt Sander.

VIET - S1 211, ...2-Head Wide Belt SanderWidth Cap. 43"; Drum and Combination Head.2-Head with: (1) Contact Roller and (1) Fine Sanding Platen; 1,100 mm (43") working width. Solid wood, veneer & lacquer Sander.Head Configuration:1st Head: Rubber covered contact roll, spirally grooved, dia. 200 mm (7.9").2nd Head: Fine sanding platen, segmented, electronically controlled.Specifications: --Both heads driven by (1) main motor 15 kW (20 HP). -- Both heads equipped with: 1,130 x 2,620 mm (44-1/2" x 103") abrasive belts. -- Roller shoe holddowns, Pneumatic tension of sanding belts and feed conveyor. Feed System: -- Vacuum conveyor system for small and lacquered parts. -- Variable speed conveyor belt drive from 3 - 16 MPM (11 - 52 FPM). -- Part thickness 3 - 160 mm (1.2" - 6.3"). -- Motorized part thickness adjustment, with digital height readout. Equipped with & Features: -- SCS Control panel with storage capacity for multiple sanding programs. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.

VIET - S1-323, 3-Head Calibrating Wide Belt Sander (53" Capacity)53" Width cap., Steel Drum, Drum, and Combination Head.Head Configuration:1st Head: Steel contact roller, spirally grooved, dia. 190 mm (7-1/2"), 20 HP motor.2nd Head: Steel contact roller, spirally grooved, dia. 190 mm (7-1/2"), 20 HP motor.3rd Head: Combination head with contact roller, electric-pneumatic fine sanding platen, not segmented.Specifications: -- Belt size 53" x 86". -- Pneumatic tensioning of sanding belts and 160 mm (6-5/16") dust hoods. -- Electronic inverter for variable feed speed, 2 HP drive. -- Roller & pressure shoe holddowns. -- Part thickness 3 - 160 mm (1.2" - 6,3"). -- Min working length 250 mm. -- Motorized part thickness adjustment, with digital height readout. -- Pneumatic tensioning of feed conveyor.Equipped with & Features: -- Load meter on main motor; disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back. -- Oversized parts infeed protection. -- Constant Pass Line Sander.NOTE: Some specs need to be verified.

VITAP LINEA 42 Line Boring SystemSpecifications: -- (2) Drill heads of (21) spindles ea., drills from bottom up, ea. support with 2 HP motor and (21) spindle boring block w/panel support mounted on top; -- Drills panels from 100 - 3,000 mm in length, and 100 - 950 mm in width. Complete with: -- Digital readouts for boring blocks, 2,000 mm bar scale fence with (5) adjustable flip stops. -- (2) Moveable overhead pneumatic holddown cylinders, foot pedal for clamping & boring cycle.

VITAP - ALFA 21, ...Construction Boring MachineSpecifications: -- 21-Spindle boring head on 32 mm centers; drills vertically from bottom-up & head rotates to a horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth, 2.5 HP - 2,800 RPM motor, pneumatic drill head advance with speed control. Left & right flip stops mounted onto a custom-made sliding back fence (see photos for details). Details: -- (4) Pneumatic hold-down clamps; pneumatic foot pedal control. -- Complete with: Magnetic starter & overload protection.

VITAP - ECLIPSE 2.0, ...Semiautomatic Contour (Curved Panel or Round Tables) EdgebanderSemiautomatic Contour Edgebanding and Trimming for Panels including: -- Concave shaped panels. -- Convex shaped panels. -- Straight panels.(3) Methods of Operation: -- Manual: Via the use of a foot pedal control for the guillotine. -- Laser: By entering the length of the desired dimension into the PLC, the guillotine will engage automatically. -- Smart Laser: Guillotine engages automatically when the high-definition laser detects the starting point of the applied edgeband with no need to measure/enter the length.Standard Specifications: -- High productivity and flexibility. -- Application for big and small shaped panels. -- Reinforced hinged holding arm with vacuum table to hold large pieces for edging and trimming. -- Color touch screen HMI 7”.(4) Control Pedals: -- Pedal to start the automatic feeding and manually engage guillotine. -- Pedal for slowing down the feed to process tight radii (turtle speed). -- Pedal for opening/closing the trimming head. -- Pedal to engage suction table vacuum.Glue Station: -- Teflon coated glue pot with 1 kG / 2.2 Lbs capacity. -- Quick disassembly system. -- Supports PUR or EVA Hotmelt Glue. -- Amount of glue applied is adjustable., -- Programmable glue temperature. -- Automatic guillotine for edgebands up to 3 mm x 45 mm. -- (2) Side rollers to follow the contour of the workpiece. -- Bottom support roller tilts after edgebanding for easy release of the panel. -- Variable speed for turtle speed adjusted by potentiometer.Laser for an automatic speed adjustment for complex panel shapes with the help of a potentiometer. -- Utilizes 2 x 800 W heating elements with a thermoregulator and electronic temperature control.Trimming Station: -- Trimming unit with: (2) Motors, approx. 0.5 kW / 0.7 HP high frequency, 15,000 RPM motors. -- Upper, lower, and front contour copy rollers, -- Auxiliary working table that can be raised for trimming small pieces. -- (2) Brazed cutters: R=3, Z = 6. -- Trimming Station with: Pneumatic tilting to allow trimming of big pieces.Technical Data: -- Dimensions of the machine: 2,000 mm (6’-6”) x 2,000 mm (6’-6”) x 1,700 mm (5'-7”). -- Weight: 600 kG/1,323 Lbs. -- 10 - 60 mm Panel thickness range. -- 1 - 3 mm Band thickness range. -- 13 - 64 mm Band height range. -- Connection data: 230 V, 3-Phase, 60 Hz.

For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness and up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower, 3,000 watts for up to 650° F temperature, (1) Min heat-up time. -- Guillotine type front & rear end trim (with fast speed, flying knife), top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder, 16 FPM feed speed. - Mounted on machine base with panel support table.

VITAP ALFA 27 CONSTRUCTION BORING MACHINE27-Spindle boring head on 32 mm centers, drills vertically from bottom-up and head rotates to horizontal position for edge boring, head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth, 2.5 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences for construction boring, (3) pneumatic holddown clamps, 118" line boring fence w/ (4)flip-stops, pneumatic foot pedal control.

VITAP ALFA 21 CLASSIC 21-Spindle Semi-Automatic Construction & Line Boring Machine – New, Never Used!Specifications: -- Bores vertically from bottom & horizontally from rear. -- Table size 500 x 864 mm (19.69" x 34.02"). -- Max. panel size 800 x 3000 (31.50" x 118.11"). -- Max. drilling depth 2-3/4", Distance between spindle centers: 32 mm (1.26") Each, 640 mm (25.20") Total. -- Spindle speed 2,800 RPM.Equipped with: -- 1.8 kW (2-1/2 HP) - 2,800 RPM Motor. -- Pneumatic head rotation, with Switch control. -- Pneumatic drill head advance, with Speed control. -- Head height adjustment, with Mechanical digital readout. -- Left & Right Side fences, Back fence, with Flip stops. -- (2) Pneumatic hold-downs. -- Pneumatic foot pedal control, Magnetic starter, & Overload protection. -- Quick-change chuck set.NOTE: Sold "As-Is" Without Warranty!

VITAP BC-91 EVO Contour Edgebander – Demo Model Never Used in ProductionSpecifications: -- Designed for straight or curved (contour) edgebanding. -- Edgebanding thickness 0.3 - 3 mm (0.01" - 0.12"). -- Panel thickness & Edgebanding height 10 - 60 mm (0.39" - 2.36"). -- Min. radius with concave curve 20 mm (0.79"). -- Min. panel length 280 mm (11.02"), Feed speeds 3 - 20 MPM (10 - 65 MPM).Equipped with: -- Coil dispensing table. -- 3 kg (6.61 Lbs.) Compact "Quick heat-up" under-worktable glue pot. -- Double roller glue applicator. -- Magazine for coil material or solid strips. -- Manual feeding of straight and/or contoured panels. -- Program-controlled end cutoff for coil material. -- Digital glue temperature control. -- Magnetic push button starter. -- Single-motor end trim, with 1 HP - 10,500 RPM Motor.NOTE: Sold "As-Is" Without Warranty!

VITAP SMART Hot Melt Contour Edgebander – New, Never Used!Specifications: -- Designed for straight, curved (contour), or beveled edgebanding. -- Unique design to allow banding of strips or rolled edging. -- PVC Edgebanding thickness 0.4 - 3 mm (0.02" - 0.12"). -- Edgebanding height 10 - 60 mm (0.39" - 2.36"). -- Min. radius with concave curve 20 mm (0.79").Equipped with: -- Hot melt glue system applies adhesive to banding for softer flexible applications. -- Automatic advance of banding material by foot pedal activation. -- Digital temperature control for precise & easy temperature setting. -- Small glue pot for quick heat-up.NOTE: Sold "As-Is" Without Warranty!

VITAP RC 92 Semi-Automatic Top & Bottom Edge Trimmer – New, Never Used!Specifications: -- For straight & curved edgebanded panels. -- Max. edge thickness 3 mm (0.12"). -- Panel thickness 10 - 60 mm (0.39" - 2.36"). -- Table size 27" x 31".Equipped with: -- (2) 0.55 kW (0.7 HP) - 12,000 RPM Spindle motors. -- Large dia. guide bearings to ensure precise trimming of edges.NOTE: Sold "As-Is" Without Warranty!

VITAP SMART Hot Melt Contour Edgebander – New, Never Used!Specifications: -- Designed for straight, curved (contour), or beveled edgebanding. -- Unique design to allow banding of strips or rolled edging. -- PVC Edgebanding thickness 0.4 - 3 mm (0.02" - 0.12"). -- Edgebanding height 10 - 60 mm (0.39" - 2.36"). -- Min. radius with concave curve 20 mm (0.79").Equipped with: -- Hot melt glue system applies adhesive to banding for softer flexible applications. -- Automatic advance of banding material by foot pedal activation. -- Digital temperature control for precise & easy temperature setting. -- Small glue pot for quick heat-up.NOTE: Sold "As-Is" Without Warranty!

VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL FEATURES: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) are located on each machine extremities, these are easily accessible and can be used for sanding belts and various tooling storage. Sanding belt motor power: 3 Kw Abrasive head motor power: 1.5 Kw Oscillation motor power: 0.38 Kw Feed motor power: 0.75 Kw Motor power for electrical adjustment of sanding group: 0.19 Kw Machine voltage: 480/3/60 Full Load Amps @ 480V: 15A Compressed air: Not required Dust collection requirement one (1) only 6" (150mm) port: 950 CFM Sanding belt speed: 14 Mt/sec Variable speed of the belt: from 5 to 25 m/min Sanding belt dimensions: 150 x 2640 mm Height of working table: 930 mm Dimensions of front working table: 1980 x 250 mm Machine dimensions: 2500 x 900 x 1600 mm Net weight: 1000 KMAIN FEATURES: User friendly PLC touch screen control panel is accessible from 360° by the operator, the control panel is centrally located on the infeed end of the machine. Factory installed variable feed drive (VFD), enables machine to run from 5 M/Min to 25M/min (+/­ 80 ft/Min). The entire sanding plenum rise and fall is motorized, it can be adjusted vertically in height to utilise the full height/width of the sanding belt. An oiling unit ensure long life of sanding plenum rise and fall master cylinder.