ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 13,975 Run Hrs. & 9,704 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.

ATLAS COPCO GA-30 FF Rotary Screw Air Compressor w/DryerSpecifications: -- 40 HP - Approx. 187.4 CFM at 125 PSI, single-stage oil-injected rotary screw air-end & totally self-contained. -- Standard features: -- Inlet air filtration, oil injected lubrication, long-life RDX (Roto Duty Extend) synthetic oil; direct-on-line motor starter, and drain trap. -- Equipped with: -- Elektronikon Operator display panel, PLC controller, with pressure gauges, control mode selection, and hour meter. -- Includes: -- Built-in Refrigerated Air Dryer.

CAM-WOOD AC-7580 Piston Air CompressorCompact unit with a 7.5 HP induction motor.Features & Specifications: -- 22 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.

CAM-WOOD AC-5080 Piston Air CompressorCompact unit with a 5 HP induction motor.Features & Specifications: -- 18 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.

CAM-WOOD AC-100120 Piston Air CompressorHeavy Duty unit with a 10 HP induction motor.Features & Specifications: -- 34.2 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 120-Gal. horizontal tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.

CAS (COMPRESSED AIR SYSTEMS) B73H84-E Reciprocating Air CompressorElite Series 7.5 HP 80 Gallon Horizontal Compressor @ 175 PSI / 24 CFMFeatures & Specifications: -- Access to Compressor Valves without Compressor Head Removal. -- All UL Electrical Controls -- ASME Tested Powder Coated Steel Tank. -- Auto Start / Stop. -- Bearings on Both Ends of the Crank Shaft. -- Centrifugal Unloader. -- Disk and Spring Valves. -- Fully Enclosed Belt Guard. -- Heavy-Duty Air Filter. -- Heavy-Duty (2) Stage Solid Cast Iron Pump. -- Industrial Grade Electric Motor. -- Magnetic Starter Mounted and Wired. -- Needle Bearings, and Inserts on Rods. -- Stainless Steel Flex Air Lines. -- Swedish Steel Valves. -- TEFC Drive Motor (3 Phase Only). -- Torrington Needle Bearings. -- 2-Grove B Width Motor Pulley. -- 2-Piece Tank Top Plate Design.Elite Compressor Features: -- All Basic Features. -- Automatic Tank Drain. -- Belt Guard After Cooler. -- Low Oil Monitor. -- Tank Discharge Ball Valve. -- Vibration Pads.

CHAMPION - HRA25-25, ...Dual Stage Air Compressor. 25 HP Commercial Duty motor; 90.1 CFM at 175 PSI and 250-gal. horizontal tank. -- Features: CHAMPION's "R" Series 2-stage cast iron pump, dome pistons, and disc valves allow for higher performance at lower RPM's; largest roller bearings in the industry. -- The 250-gal. horizontal tank is equipped with: Large pressure gauge, standard tank drain, and a hard painted finish for years of durability. -- Complete with: Large dia. air filters, OSHA approved belt guard. -- Air-cooled aftercooler.

COMPAIR - LeROI WM-100SS II WQ, ...Rotary Screw Air CompressorSpecifications: -- Main motor: 100 HP -- Working pressure: 125 PSI -- Capacity: 445 CFMNOTE: THIS MACHINE REQUIRES AN EXTERNAL COOLER Note: This machine has (21,311) hours on it.

CURTIS - 5E2VT8-A3, ...Air Compressor, 5 HPSpecifications: -- Maximum allowable working pressure of 200 at 450 PSI.Equipped with: -- 80-Gallon Tank

DAYTON - 3Z968, ...2-Stage Reciprocating Piston Type Air Compressor -- 10 HP Motor; 2-stage rotary screw type; 115 CFM @ 125 PSI; 120-gallon horizontal tank. -- Complete with: All controls and starter.

ELGI AB37V Oil-Free 50 HP Screw Air Compressor with Mikropor Refrigerated Air DryerWith the ELGi AB "Always Better" series, we bring you a disruption in oil free compressed air technology. Every ELGi AB series customer across the world is assured of zero risk of contamination in the compressed air. Our customers are assured of guaranteed emission reduction while ensuring class zero air, free of oil residue, at all times.Specifications: -- Horsepower: 50 -- Working Pressure PSIG: 100-150 -- Outlet Connection: 1-1/2" NPTIncluded: -- Mikropor Refrigerated Air Dryer - MK-US-250 -- 240 Gallon Tank + Kit: -- WaterHog Pneumatic Zero Loss Drain LH50-OLAAWCompressor Equipped with: -- Variable Speed Controls -- Two Stage Air Filtration -- Advanced Neuron III Controller -- Industrial Sound Enclosure -- Robust Cooling System -- Elimination of Oil Cooler with Water Injected Rotor Screws -- Three Stage Water Separation -- Low Operating Temperatures -- FDA Approved SS with Corrosion Protection -- Closed Loop Water Circuit -- Food Grade Approved Anodized Aluminum Housing -- Double Gear Case Design, Both Ends of Screw assembly -- Precision Machined, Hardened, Gear Case Gears. Balanced to ReduceRefrigerated Air Dryer Specifications: -- Air Cooled Refrigerated Compressed Air Treatment Package - With Integral Preand After Filters -- Air Quality ISO 8573.1 Class 1,4,1 Package -- 1-micron Particulate On Board Pre-Filter Included (GKO-US 700MX) -- 0.01-micron Coalescing On Board Post-Filter Included (GKO-US 700MY) -- 250 scfm Rated @ 40°F Dewpoint -- Performance Based on Customer Site Conditions -- Performance Based on 100°F Ambient Temp/100°F Inlet Air Temp/100psig -- 1.8 psi Pressure Drop Across MKUS-250 -- Reduces Air Compressor Energy Operating Costs -- R-134A Refrigerant

ELGI EG45-125 Rotary Screw Air Compressor; 60 HP - 267 CFM @ 125 PSIG60 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty.

ELGI EN04-125 5 HP ENCAP Series Rotary Screw Compressor; 19.3 CFM @ 125 PSIG Equipped with: -- Efficient air filtration system where air enters through a pre-filtered enclosure. -- After cooler is standard on all models to enable high efficiency TEFC, Super E, 5 HP motor operation up to 115°F ambient temperature.Complete with: -- "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 3-Stage efficient air-oil separation (less than 2 PPM). -- Single door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety. -- (230 volt, 1-phase option available).

ELGI EN07-125 10 HP Rotary Screw Compressor; 38 CFM @ 125 PSIG.Equipped with: -- Efficient air filtration system where air enters through a pre-filtered enclosure. -- After cooler is standard on all models to enable high efficiency TEFC, Super E, 10 HP motor operation up to 115°F ambient temperature.Complete with: -- "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 3-Stage efficient air-oil separation (less than 2 PPM). -- Single door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety.Recommended option: F10104 / MICRO 50 Clean Resources F10104 / Micro 50 Clean Resources F10104 Oil/Water Condensate Separator - add;...$ 500

ELGI EG22-125 Rotary Screw Air Compressor; 30 HP - 130 CFM @ 125 PSIG30 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty

ELGI EG30-125 Rotary Screw Air Compressor; 40 HP - 170 CFM @ 125 PSIG40 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty

ELGI EG37-125 Rotary Screw Air Compressor; 50 HP - 212 CFM @ 125 PSIGELGi’s Encap series screw compressors are designed to encapsulate all functional components and compressor within a common housing. With its small footprint, high reliability and low maintenance requirements, the compressors are ideal for all industrial applications where size, efficiency and cost matter.Specifications: • Horsepower: 50 • Starter: Wye Delta • CFM: 207 • PSIG: 125Standard Features: • 6 Year Airend Warranty • Low Sound Enclosure • Premium Efficiency NEMA motor w/F insulation • TEFC Drive and Fan Motor • High Ambient Oil Cooler for low operating temperature • UL/cUL Certified Control Panel with Wye-Delta Reduced Voltage Starter • Controls & Indications: Microprocessor Controller includes • Maintenance Schedules • Pressure Transmitter • Temperature Transmitter • Auto Restart • Remote Start / Stop • Modulation and Load / Unload Controls • Phase Monitor • DCS Connection through Rtu/RS 485 PortExtended Warranty (Parts and labor):Extended Warranty coverage requires commissioning report submitted within 30 days of the compressor start-up, the use of ELGi replacement parts, adherence to ELGi’s maintenance schedule, testing, and conditions as outlined below. Failure to follow these terms will void the Extended Warranty.Air End:72 months from date of start-up or 78 months from date of shipment from an ELGi warehouse, whichever occurs first.

ELGI EGRD 300 Refrigerated Air Dryer (300 CFM)The ELGi EGRD 300 refrigerated dryer is designed to provide a constant 41ºF dew point and utilizes the latest advancements in refrigeration technology to provide low operating cost and years of trouble-free performance.The advanced “ALU Dry"; aluminum heat exchanger module enables the packaging of the pre-cooler, evaporator, separator, and reheater all in one compact unit. This reduces the size, weight and pressure drop associated with conventional exchangers and optimizes the overall performance and reliability of the dryer which ensures effective removal of condensed liquids regardless of flow.Features: -- Microprocessor Controls with Dew Point Display Indication -- All-In-One Aluminum Design Exchanger -- Low-Pressure Drop -- Ozone Friendly Refrigerant -- De-Mister Type Moisture Separator -- Environmentally Friendly Refrigerant -- Hot Gas Bypass for Constant Dew Point -- Extended Service Life -- Timer Drain Options Include:ELGI Pre-Filter EPFP450 - 500 scfm - 2" NPTThe ELGi Premium Filter Series is constructed from premium materials and features with ease of installation and service in mind. Filter elements have a unique push-fit, double O-ring design to ensure no contaminants get down stream. -- High Quality Aluminum Construction -- Automatic Internal Float Drain -- Pop-up filter change indicatorPrice ...$ 1,150.00ELGI Zero Loss Drain, Model EZL10-110VELGi Electronic Zero Loss Drain, Model EZL10-110V, for compressors up to 500 scfm -- Unique sensor detects all kind of condensate -- High dirt resistance -- Low Maintenance -- Fully automatic -- Saves energyPrice ...$ 325.00

ELGI EG75-125 Rotary Screw Air Compressor; 100 HP - 453 CFM @ 125 PSIG100 HP Rotary Screw Compressor, 450 CFM @ 125 PSIG(Direct Drive); Air-End equipped with "eta-V" profile rotors. -- Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty: Lifetime warranty subject to adherence to conditions outlined below. The scope of lifetime warranty will cover replacement of parts and free of cost labor for 120 months from date of start-up or 126 months from date of shipment from an ELGi warehouse, whichever occurs first. Parts only thereafter.Optional: [F10501 / CRP-500] Clean Resources F10501 / CRP-500 CRP-500 CFM Oil/Water Separator System (Includes DC Plus Manifold Installed) Order Number: 553-12-0047 The Next Generation Molecular Filtration System Compression-fit manifold for precise filtration control Timer drain for improved flow of condensate through the media bed Antimicrobial sanitation of discharge hose to prevent algae growth Twelve available inlets (increased from six) No maintenance or messy bag change-outs Cradle-to-grave warranty System monitoring services - Add ...$ 2,650

ELGI EN11-125 Tank Mounted Rotary Screw Compressor w/Refrigerated Dryer, 15 HP - 55 CFM @ 125 PSIGENCAP Series Screw Compressors:120 Gallon Tank Mounted with refrigerated dryer and filters - are designed to encapsulate all functional components and compressor within a common housing. With its small footprint, high reliability and low maintenance requirements, the compressors are ideal for all industrial applications where size, efficiency and cost matter.Equipped with & Features: -- 6 Year Airend Warranty -- Low Sound Enclosure -- Premium Efficiency NEMA motor w/F insulation -- TEFC Drive and Fan Motor -- High Ambient Oil Cooler for low operating temperature -- UL/cUL Certified Control Panel -- Controls & Indications: Microprocessor Controller includes -- Maintenance Schedules -- Pressure Transmitter -- Temperature Transmitter -- Auto Restart -- Remote Start / Stop -- Modulation and Load / Unload Controls -- Phase Monitor -- DCS Connection through Rtu/RS 485 PortRecommended option: F10105 / MICRO 100 Clean Resources F10105 / Micro 100 Clean Resources F10105 Oil/Water Condensate Separator - add $ 775