ATLAS COPCO - GA-55: Rotary Screw Air CompressorEquipped with: -- 75 HP - 1,755 RPM Motor; totally self-contained; single-stage rotary screw air end; 267 CFM at 125 PSI rated operating pressure; max. modulate pressure: 135 PSI. -- Complete with: -- Inlet air filtration; oil injected lubrication; motor starting control system; air-cooled aftercooler; moisture separator; drain trap. -- Includes -- "ELEKTRONIKON" Operator display panel with: Pressure gauges; control mode selection; remote & automatic start; hour meter.

CAM-WOOD AC-100120 Piston Air CompressorHeavy Duty unit with a 10 HP induction motor.Features & Specifications: -- 34.2 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 120-Gal. horizontal tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.

CAM-WOOD AC-5080X Piston Air CompressorCompact unit with a 5 HP induction motor.Features & Specifications: -- 18 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.

CHAMPION - HRA25-25, ...Dual Stage Air Compressor. 25 HP Commercial Duty motor; 90.1 CFM at 175 PSI and 250-gal. horizontal tank. -- Features: CHAMPION's "R" Series 2-stage cast iron pump, dome pistons, and disc valves allow for higher performance at lower RPM's; largest roller bearings in the industry. -- The 250-gal. horizontal tank is equipped with: Large pressure gauge, standard tank drain, and a hard painted finish for years of durability. -- Complete with: Large dia. air filters, OSHA approved belt guard. -- Air-cooled aftercooler.

COMPAIR/LEROI WM 125SS IIA 125 HP Single-Stage Rotary Screw Air Compressor, with 1,700 Hrs.Equipped with: -- 125 HP 125 PSI, single stage asymmetrical rotary screw air-end, triplex bearings in air-end for long life, efficient 3-stage air/oil separator at 1 - 3 PPM. -- Microprocessor based control system includes: -- LED Diagnostic readout with (10) operating conditions, (8) control modes, (4) emergency shutdowns, and (4) fault warnings, microprocessor control bypass load/unload. -- 7.5 HP 230/460 V Cooling fan motor.

DEVAIR 447 15 HP 2-Stage Horizontal Tank-Mounted Air Compressor Specifications: Cap. 51.8 CFM, Max. pressure 175 PSI. Complete with: 120 Gallon Cap. 24” Dia. x 60” L Horizontal Air Receiving Tank. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

DV SYSTEMS C10TD 10 HP Rotary Screw Compressor w/Tank & Dryer; 39 CFM @ 145 PSIG.Equipped with: -- Fixed-Speed, Direct Drive 10 HP motor; ideal for continuous-use applications with constant compressed air demand. Efficient power transmission provides maximum flexibility in pressure selection. -- Integrated Oil & Air Cooler contributes to the production of low discharge air temperatures, reducing energy consumption, promoting system reliability & extending air-receiver life. -- Features: -- CSC300 Controller effectively manages, monitors and maintains optimal operational parameters to ensure stable system pressure and reliable operation. -- Innovative component integration results in a compact, quiet air system engineered for efficiency & performance, providing high-capacity air delivery and stable system pressure with minimal installation space. -- Includes: -- A Microprocessor controlled AsD40 (10HP) ProDry™ Refrigerated Air Dryer with stainless steel separator & Auto Drain; Heavy-Duty Aluminum Pre-Filter Housing with a 1-Micron Filter element; 120 Gallon Air Receiver - Built to AsMe Codes & CRN Registered.

FRIULAIR ACT125UP MB 125 SCFM Non-Cycling Refrigerated Compressed Air DryerSpecifications: -- Max. inlet air pressure 203 PSIG. -- Max. inlet air temperature 158° F (70° C). -- Ambient temperature 34° - 122° F (1° - 50° C). -- Nominal pressure dew point 38° F (3° C). -- Refrigerant type R-407C.Equipped with: -- 890 W (1.19 HP) Refrigeration compressor motor. -- 95 W (0.13 HP) Fan motor. -- "ALU-DRY" heat exchanger. -- Graphic display. -- "DMC 34" LED Controller, with Condenser fan control, Scheduled maintenance reminder, Condensate drain valve timer, & Dryer malfunction detector.

INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air Dryer Specifications: Cap. 85 CFM. Max. working pressure 203 PSI. Max. inlet temperature 60° C (140° F). Refrigerant type R-134A. Equipped with: Aluminum braze plate heat exchanger. Variable speed fan. Microprocessor control, with Graphic display, LED Dew point indicator, Energy saving mode, & History of last (10) alarms. Remote alarm signal terminal. High pressure switch. Fully-adjustable programmable electronic drain valve. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

KAESER SK 20T Rotary Screw Air Center w/Dryer Specifications: -- 20 HP TEFC Motor, single-stage, oil injected rotary screw air end with the SIGMA "Profile" screw; high efficiency air & oil cooler with 40-micron package pre-filter, 4-micron air intake filter with replaceable, cleanable cartridge. -- Equipped with: -- Automatic dual control allowing unit to run fully loaded or unloaded at reduced power consumption, control panel displays air pressure & lubricant discharge pressure, operating hours, start/stop switch, power on light, & E-stop button. -- Control System monitors motor overload, high air & lubricant temperature, reverse rotation, and loss of drive with indicator lights and shutdown upon alarm. -- Complete with: -- Fully soundproof enclosure with durable powder coated finish & easy access locking panels; WYE-DELTA Start. -- Compressor is mounted on solid base frame with a solid steel floor and anti-vibrating mounts. -- Includes: -- SHULZ ADS 75 Refrigerated Air Dryer. (28,817) Total operating hours.

KAESER ASD 40 T 40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24) Specifications: Rated cap. 191 CFM. Max. pressure 125 PSIG. Equipped with: 40 HP - 3,570 RPM TEFC Direct drive motor, IE3 (Premium Efficiency). "SIGMA PROFILE" Air end. 1:1 Motor-air end coupling. Wye-Delta reduced voltage magnetic starter. Electronic Thermo-Management (ETM) system. 2-Stage 4 micron air intake filter, with Cyclone pre-separation & replaceable element. Safety pressure relief valve. Anti-vibration mounts. Sound enclosure. KAESER "SIGMA CONTROL 2" PC-Based controller, with LCD Display & Touchpad. Complete with: Integrated Refrigerated Dryer. Compressor Operator Manual & Controller User Manual. Dimensions for this Specific Machine: 70" x 36" x 61" H. Weight for this Specific Machine: 750 kG (1,650 Lbs). CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

QUINCY - QR 325: Piston Air Compressor with DELTECH - P 300 A: Refrigerated Dryer5 HP Induction motor; horizontally-mounted tank Air Compressor; oil cooler; belt guard cooler; pressure gauge; automatic start/stop control; air filter, etc. -- (4) Pole-Class B ins; drip proof; 200-gal. horizontal tank.Includes: DELTECH "P 300 A" Refrigerated dryer; rated at: 300 CFM - 460 V, 3-Phase. Uses a refrigeration system to: Chill the air causing moisture to condense & separate from the air; ensuring clean dry compressed air.

SULLAIR ES8-30H/A 30 HP Single-Stage Fluid Rotary Screw Air Compressor, with 53,186 Run & 49,602 Load Hrs. (As of 11/2023) Specifications: Cap. 111 ACFM. Rated pressure 60 - 125/135 PSIG. Noise level 85 dBA. Equipped with: E-Profile rotor design air end. 30 HP 3,530 RPM Motor. Air-cooled aftercooler. SULLAIR “SUPERVISOR II DELUXE” Microprocessor controller & graphic monitor system, with LCD Display, Touchpad, Constant pressure & temperature readout of pressure, Power failure auto restart, & Automatic start/stop. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

SULLAIR 10B-50 ACAC Rotary Screw Compressor (Open Type)Specifications: -- 50 HP - 1,770 RPM Motor, rotary screw air end, 100-110 max. PSI, approx. 180 ACFM; (2) asymmetrical lobe profile rotors only make contact on a lubricated pitchline to virtually eliminate cap. or efficiency loss. -- Equipped with: -- Tapered roller bearings on discharge and cylindrical bearings on inlet for high load carrying capacity. -- Pressurized fluid lubrication & cooling of Compressor with rigid piping & tubing; efficient 2-stage air/oil separation with replaceable element. -- Spin-on fiberglass fluid filter, Heavy Duty inlet air filter, cap. modulator stabilizes system pressure and matches output to demand (minimizes need for air receiver & reduces wear caused by start/stop). -- Includes: -- Electro-mechanical gauges & controls, air after-cooling.