DENS-A-CAN DAC-600 Can DensifierSpecificationsAll DENS-A-CAN Densifiers feature high-quality hydraulic components, advanced manifold construction, and straight-thread O-ring fittings to minimize leakage. The DAC 600 is fully automatic and will run continuously, as long as cans are being fed. It features an automatic shut off when empty.Direct Charge is the processing of cans without the need for any preprocessing like pre-weighing. The DAC 600, like all DENS-A-CAN Densifiers, can be placed directly beneath a surge storage system.Can bridging is eliminated by the use of an agitator. The agitator rotates when the single compression ram is retracting; the rotating agitator breaks bridging and forces the cans into the compression chamber. The DAC 600 is fully assembled and mounted on casters to allow for easy cleanup. After the tank is filled with oil and electricity is run to the machine, it is ready to operate!All service areas of the DAC 600 have ample access. All wear components are bolted and designed for easy replacement.Capacity in pounds/hour: -- Aluminum: 600 --Aluminum Flat: 800 -- Bi-Metal: 1,020 -- Biscuit Description: -- Typical size: 8' x 10' x 11' with integral banding grooves. -- Weight and density of a typical biscuit: -- Aluminum cans- 20/22 lbs. each or 40/43 lbs./cu. ft. typical. -- Bi-Metal cans - 35 lbs. ea or 70 lbs./cu. ft. typical. -- Banded Bundle typical size and weight: 125 Biscuits, 40' x 50' x 55; no skid or pallet needed. -- Aluminum beverage cans: 2,500 Pounds -- Bi-Metal cans: 4,375 Pounds -- 40' Trailer capacity: (18) Bundles. -- Standard Power: 10 HP - 240 V, 3-Phase, 40 Amps -- Approx. weight with conveyor: 2,600 Lbs -- Hydraulic reservoir capacity: 30 Gallons

DAC-1200 DENSACAN - Can DenisfierThe DAC-1200 is a fully automatic and will run continuously as long as cans are being fed. It features an automatic shut-off when empty. -- Capacity in pounds/hour; Aluminium 1,200 Lbs, Aluminium flat 2,000 Lbs, Ferrous 2,500 Lbs. -- Biscuit description: Typical size; 11" x 13" x 9" -- 20 HP motor

DAC-3000 DENSACAN - Can Denisfier with Infeed Conveyor and Surge Hopper --DENS-A-CAN DAC 3000 densifier is specifically designed to densify ALUMINUM and STEEL food or beverage containers into high density interlocking biscuits that meet the aluminum and steel industry requirements. --The DAC 3000 will also process full beverage containers, trim stock, aerosol cans and like materials. Along with the high density biscuits, the DAC 3000 will process tin food containers into low density biscuits approved by the detinners. The process of switching from the high density biscuit to the low density biscuit is done by simply turning a switch on the control panel. Being direct charge makes the DAC 3000 well suited for a surge/storage hopper, in which the DAC 3000 is placed directly beneath a surge hopper. The 3000 may be purchased with an optional stand-alone separator. --The DAC 3000 is designed for the larger processor of cans. The DAC 3000 minimizes strokes and gets maximum production with fewer moving parts. Like all DENS-A-CAN equipment, it is simple to operate, highly reliable, and easy to maintain. --“STATE-OF-THE-ART"; ENGINEERING: • Fully automatic with manual override switches. • Two convenient density setting options from the control panel: one for aluminum, the other for steel cans. • Automatic biscuit size control, automatically adjusts for whole, mixed, or flat cans. • Agitator system breaks up can bridging even from the largest of surge hoppers. • Thermostat controlled heater and self contained cooler/filtration system. • High and low oil temperature protection. • Latest electronic and hydraulic controls utilizing tie rod cylinders. • TEFC motors and sealed electrical enclosures. • Reinforced heavy duty compression chamber with tongue and groove tracking system eliminates cylinder rod lift. • Four edged hardened tool steel cutter bar. • All components are easily accessible with fewer moving parts and sensing components. Wear areas are bolted for ease of service. The DAC 3000 Direct Charge densifier is perfect for the larger processor and material recovery facility, that needs a fully automatic high production densifier.