SIERRA REB 2-250 TWO RAM BALER --New in 2020Specifications per factory: --The Sierra REB-2 two-ram baler was a machine designed by recyclers, for recyclers and is the ultimate machine for any high volume or high production facility. Available with either a 150 or 250 HP power unit, it has the ability to process a wider variety of materials at a higher rate of production and will ensure your return on your investment. The REB-2 has a unique shear blade that works on waste, fiber, non-ferrous scrap metal, and tires, so there is no need to choose between one material or the other. --To eliminate material contamination when changing materials, the REB-2 features an innovative bale eject and oversized bale release door combined with full ejection of bales. This feature also produces better bale integrity, especially on materials with lots of memory. --The standard features on the REB-2 two-ram baler gives it unmatched performance and versatility as well, expertly handling a wide range of recyclable materials:MSWUBCPETOCCONPHigh gradesAluminumNon-ferrous metalsTires MAIN MOTORS: 2 @ 125HP/480V/3PH/60HZ/TEFC• ELECTRICAL SERVICE: 480V 500 AMP• MATERIAL SETUP: 16 MATERIALS WITH 15 BALING PARAMETERS PER MATERIAL (SAVE, RESTORE AND RESET FACTORY DEFAULTS)POWER HYDRAULIC• SYSTEM OPERATING PRESSURE: 4500 PSI• SHEAR/BALING FORCE: 254 TONS• RAM-FACE PRESSURE: 304 PSI• MAIN PUMP FLOW: 564 GPM• PUMP: KAWASAKI PISTON/ VICKERS VANE• OIL FILTRATION: 5µ RETURN LINE, 3µ KIDNEY LOOP• MAIN CYLINDER: 12"; BORE - 254 TONS• EJECT CYLINDER: 8"; BORE - 113 TONS• DOOR CYLINDER: 7"; BORE - 87 TONS• RESERVOIR CAPACITY: 1400 GALLONS

SIERRA - RB6000, ...Portable Baler/LoggerNew in 2008 - Approx 6500 Hours - Ready to Ship July 2025Reconditioned -New Two main rods3 New Door Rods Remaining 3 rebuilt The RB6000’s automatic baling and logging cycles keep you at peak efficiency. Baling: 12 - 16 Tons per hourLogging: 18 - 22 Tons per hourAutomobile Logging: 26 - 32 Tons per hourThe RB6000 baler/logger is a beast on automobiles, appliances, and lightweight sheet iron; producing logs with the density you need to meet max weight. Looking to produce mil-spec bales?The RB6000’s cylinder comes within 18 inches of each other allowing you to densely bale clips and busheling to mill specifications.Average Bale and Log specifications:Bales: Size (40 in. X 24 in. X Variable), Weight (850 lbs.)Logs: Size (40 in. X 24 in. X Variable), Weight (1200 - 1400 lbs.)The portability of the RB6000 baler/logger gives you the versatility you need with the capability of being moved to multiple locations or to different areas within the same location.The hydraulic powered outriggers provide the needed stability to handle the heavy weight of the machine.

SUMMIT PR-9S 2-Ram Horizontal Baler -- Motor: 60 HP. -- Main Cylinder: 9". -- Eject Cylinder: 8". -- Feed Opening: 60" x 44" x 46". -- Cranston Wire Tie. -- Infeed Conveyor. -- Loaded onto your Truck.

ACCE TIRE BALERSpecifications: -- 30 HP motor --Overall Dimensions - 18' X 16.5' X 12.5' --13,000 lbs --Dual Cylinder

AMERICAN BALER 5042-AT-840 Auto-Tie Horizontal BalerSpecifications: -- Feed Opening: 49-1/2" x 40-1/2" -- Bale size: 42" x 42" x Variable -- Main cylinder: 8" x 66" Stroke -- Main motor: 40 HP -- No load cycle time: 25 Sec -- Under load cycle time: 43 Sec

AMERICAN BALER - PAC-4029-730R, ...Auto-Tie Baler(2) Available !Specifications: -- Motor: 30 HP. -- Main cylinder: 7". -- Feed opening: 40" L x 27-1/2" W. -- Charge box: 29"; x 42"; x 49";. -- Bale size: 30" x 43" Variable. -- Normal operating pressure: 3,000 PSI. -- Compressing force: 115,453 Lbs.Features: -- PARKER PLC controls. -- Regen hydraulics.

AMERICAN BALER - 6042H-830: Auto-Tie Horizontal Baler with Shear BladeSpecifications -- Cylinder: 8". -- Main motor: 30 HP. -- Feed opening: 60" x 42".Equipped with: -- PLC and push-button controls. -- Shearing blade.

AMERICAN BALER - 60420083R With Infeed ConveyorSpecifications -- Cylinder: 8". -- Main motor: 30 HP. -- Feed opening: 60" x 42".Equipped with: -- Infeed Steel Belt Conveyor -- 5' W x 5' Flat x 20' Length

AMERICAN BALER - 5042-10-30: Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 10". -- Main motor: 30 HP. -- Charge opening: 50 x 42".

BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck

BALEMASTER E-1290 Auto-Tie Horizontal Baler with AMERISHRED AMS-7500 Shredder/Conveyor/TipperBaler Specifications: -- Cylinder: 10" -- Bale size: 36" x 40" x variable -- Motor: 75 HPShredder Specifications: -- Cut: 5/8" -- Motor: 75 HPSystem equipped with: -- Enduraveyor Baler Feed Conveyor -- Discharge Conveyor -- Metering Feed Conveyor -- Cart Tipper

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

BALEMASTER 4025G-8 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 25 HP -- Feed opening: 32" x 27" -- Bale size: 30" x 36" x VariableEquipped with: -- 5 Wire TieNOTE: Shear not included.

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

CAN-PAK - CD-3000: Complete Can Densifier -- Motor: 25 HP.Dimensions• Height: 9’-2";.• Width: 3’-10";.• Length: 13’-5";.• Machine weight: 8,000 Lbs.• Conveyor weight: 1,000 Lbs.• Conveyor: 11’-5"; High x 20-1/2"; wide x 13’ long.Specifications• 25 HP Power unit.• 460 Volt, 3-phase wiring.• Solid-state programmable controller.• Thermostatically controlled hydraulic oil cooler.• 1 Cubic yard hopper.• 120-gallon hydraulic tank.• 20-1/2"; Wide infeed conveyor with: 3/4 HP Motor. Direct drive gear reducer. Magnetic head pulley. Steel reject chute.

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP - 3/60/208/230/460 Volt Hydraulic Power Unit

CP MANUFACTURING - S100-6-LH-US, ...Screens -- (1) System of (2) Screens -- Very lght Use -- Ordered as part of a Single-Stream Sort System that was designed to run 10 Tons/Hr -- 1-Feed Conveyor -- Each: 14,500 Lbs -- Loaded onto your Truck

CRAM-A-LOT - SCR-T2-34: ...34-Yard Self-Contained CompactorsSpecifications: -- Cylinder: (2) 4". -- Main motor: 10 HP. -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm). -- Capacity: 34-Yard. -- Ram force: Up to 24 tons.

CRAM-A-LOT - HX-60: Closed Door Baler with Cart Dumper & Infeed ConveyorSpecifications: --The CRAM-A-LOT "HX-60 HH" & "HX" Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. -- CRAM-A-LOT® HH & HX Series Balers are: Built with extra Heavy-Duty construction; ideal for warehouses & recyclers who deal with large quantities of corrugated and paper products.Baler is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered Feed Conveyors and Cart Dumper Systems efficiently control Baler feed rates for optimum performance in a complete Baling System.Standard Features include:ANSI Z245.5 Compliant: All Compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control Panels.UHMW Ram Shoes: Adjustable to assure straight tracking and readily replaceable, should the need arise.Oil Sight Gauge: Oil level at a glance.Oil Filter: Replaceable "spin-on" cartridge to keep your oil clean.Heavy-Duty Controls: NEMA 4-Rated pushbutton controls with "key lockable" start switch.Automatic single-cycle operation. -- Bale Size: 60" x 30" x 40". -- Bale Weight: Up to (OCC) 1,400 Lbs. --Throughput: (OCC) 2-1/2 Bales /Hr. -- Cylinder: 7".