HOMAG EDGETEQ S-500 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:0.3 - 20 mm (0.011 - 7/8") Edge material thickness; 8 - 60 mm (0.3' - 2.375") panel thickness; 160 mm (6.375") min. panel length and 70 mm (2.75") min. panel width.High flexibility is achieved as all edge materials can be processed: 0.3 mm Melamine, up to 3 mm ABS, PP, PVC and wood as coil material.Solid wood strips and veneer strips up to 12 mm are fed in individually and up to 20 mm from the package. Even veneer strips of up to 1 mm can be fed from the package.For perfect high-gloss parts, important components such as the motor-driven top pressure and the automatic adjustment of the glue joint scrapers are used.Special tracing elements are ideal for processing of acute angled or obtuse angled parts or parts with hinge holes and transversal grooves.Variable Production Feed Speeds from 16 - 30 MPM (52 - 98 FPM). -- Equipped with: Separating agent spraying unit. -- Pre-milling Station: (2) Motors @ 2.25 kW (3.0 HP), 12.000 RPM; LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. Equipped with diamond cutter heads. -- Infeed fence with Servo motor positioning. -- Infrared Radiant Quartz Heating Unit between glue roller and pressure section. -- Automatic Edge Magazine for strip & coil stock, strips 0.4 mm - 12 mm (0.015 - 0.47"), coils up to 3 mm PVC with "HD" guillotine. -- "Quick Change" Glue Tank for maintenance, glue type & color change. -- Pressure Section: 1st. Roller driven plus (2) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- HOMAG "PowerTouch control, memory: 256 MB RAM, 1 GB Flash Card Drive. -- Workstations: End Trimming: (2) Motors @ 0.35 kW (1/2 HP) - 12,000 RPM; automatic chamfer from control panel 0°- 15°. -- Multistage MS40 Flush/Bevel-Fine/Radius Trimming Unit:Top/bottom: (2) Motors, 0.55 kW (3/4 HP) - 12,000 RPM, auto-tilt positioning 0° - 25°; with combination flush/radius/chamfer cutterheads. -- Multifunctional trimming unit MF60 Servo trim - Horizontal and vertical tracing wheels, equipped with brushless multi-axis Servo motors for positioning of work unit & horizontal copy wheels for quick changeover. Includes (3) positioning options: Profile 1, profile 2, and flush trimming; nested top copy system. -- Corner Rounding Unit: (1) 0.35 kW (1/2 HP) - 12,000 RPM Motor for leading & trailing edges, vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. -- Scraping, multi-profile (PVC): Top/bottom with (2) profiles (1 mm and 2 mm or 3 mm instead of 2 mm), Servo control positioning of vertical & horizontal copy wheels. PVC scrape collection box. -- Flat Glue Joint Scraping Unit: Flush top/bottom on panel surface with floating insert knives. -- Buffing Unit: Top & bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM. -- Operator Control: HOMAG powerTouch2 control with clearer structure, 3

HOMAG EDGETEQ S-500 EDGEBANDER (W/PRE-MILL) (aka "TAPE ROCKET" 2.2 LH): -- Specifications:0.3 - 3 mm (0.012 - 0.125") Edge material thickness; 8 - 60 mm (0.3' - 2.375") panel thickness; 160 mm (6.375") min. panel length and 60 mm (2.36") min. panel width.High flexibility is achieved as all edge materials can be processed: 0.3 mm Melamine, up to 3 mm ABS, PP, PVC & wood as coil material.For perfect high-gloss parts, important components such as the motor-driven top pressure and the automatic adjustment of the glue joint scrapers are used.Special tracing elements are ideal for processing of acute angled or obtuse angled parts or parts with hinge holes and transversal grooves.Selectable Production Feed Speeds from 16 - 30 MPM (52 - 98 FPM). Minimum workpiece gap 500 mm @ 25 MPM. -- Equipped with: LPZ/II Release Agent spraying unit. -- Pre-milling Station: (2) Motors @ 3 kW (4.0 HP), 9.000 RPM; LH & RH rotation w/electro-pneumatic jump control for chip-free and clean panel edges. Equipped with diamond-insert cutter heads. -- Infeed fence with Servo motor positioning. -- Infrared Radiant Quartz Heating Unit between glue roller and pressure section. -- Automatic 2-Coil Magazine for coil stock 0.3 mm - 3 mm (0.011 - 0.12"), "HD" guillotine. -- QA-65 P Gluing Unit with Quick Melt Pre-Melter & "Quick Change" Glue Tank for maintenance, glue type & color change. -- Pressure Section: 1st. Roller driven plus (2) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- HOMAG "PowerTouch control, memory: 256 MB RAM, 1 GB Flash Card Drive. -- Workstations: End Trimming unit PK 25 - (2) Motors @ 0.8 kW (1HP) - 12,000 RPM; Programmable electro-pneumatic reset from chamfer to straight trimming • Programmable electro-pneumatic adjustment of motors to positions: • Flush/Bevel trimming • Overhanging for Post Processing. -- PF 20 Fine Trimming Unit - (2) Motors @ 0.4 kW (0.5 HP) - 12,000 RPM. • Height adjustment synchronized with top pressure beam • Swiveling range: 0° – 25° is manually adjustable between different workpiece thicknesses. -- PN10 Profile Scraping Unit with • tracing from top, bottom, and side • pneumatically-controlled blow off nozzles • height adjustment synchronized with top pressure beam • suction collection box for edgebanding material scrapings • electro-pneumatic positioning in/out of the processing area, with (2) quick-change scraper heads. -- FA 20 Basic Glue Joint Scraping Unit to remove glue residue unit from the top and bottom, which eliminates additional hand scraping and cleaning. • Height adjustment is synchronized with the top pressure beam • Electro-pneumatic positioning in and out of the processing area. -- FA 06 Edge Buffing Unit to cleans and restores luster to plastic edges on the top & bottom. -- LP163/93 Cleaning Agent Spraying Unit before buffing helps clean the edges. • 2 spray nozzles for application • A 2-liter bottle of release agent is prov