EX-FACTORY INC.
EX-FACTORY INC.
 704-841-2001

Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
9 Results Found
Sort By 
EX-FACTORY-INC
 704-841-2001
Balestrini MICRON  Mortiser
$9,240

BALESTRINI MICRON ... Oscillating Slot Mortiser with Twin TablesAutomatically mortises or bores round holes in chairs, frames or case good parts; features (2) Tables eliminating dead cycle time; produces approx. (400 - 500) mortises/Hr..Specifications: -- Twin tables, tiltable 0° - 20°, vertical adjustment 0 - 100 mm (0 - 4"). -- (2) Vertical pneumatic holddowns, (1) for each side. -- Motors: Cutting spindle motor 3 HP - 9,000 RPM spindle speed, oscillating movement motor 1 HP with (50 - 350) Osc./Min. -- Mortise length is 120 mm (4.72"). -- Mortise depth max. of 80 mm (3.14"). -- Max. cutting bit dia. is 20 mm (0.78"). -- Max. mortise angle is 20°.Note from the seller : We have two of these machines, one is 220V and the other is 440V. Both are in very good condition

 704-841-2001

 Call
Cantek PCM 120  Mortiser
$7,935

CANTEK - PCM 120, ...Hollow Chisel MortiserFeatures: -- Power stroke of head permits easy, fast, and accurate successive cuts. -- Separate fan blower to keep work clean and free from dust & chips. -- Manual adjustable table height and lateral position. -- Heavy-Duty cast iron construction. -- Convenient centralized control panel. -- Foot pedal actuated cycle. -- Pneumatic workpiece clamping by lever.Specifications: -- Chisel range: 1/4" - 3/4"; Motor; 2 HP; Spindle speed: 3,400 RPM. -- Table: 16-3/4" x 21-1/4; Table tilts 30°. -- Air pressure: 8kG Clamping; Cylinder: 2-1/2"; (63 mm). -- Head traveling cylinder: 3.15"; (80 mm); Table cross travel: 5";. -- Table longitudinal travel: 18";; Table vertical travel: 12";. -- Max. stock width: 12";; Max. mortising depth: 4";. -- Machine weight: 572 Lbs. -- Shipping weight: 726 Lbs; Shipping dimension: 35"; x 38"; x 70"; (880 x 960 x 1,780 mm).

 704-841-2001

 Call
Cemco MMS-2000  Mortiser
$49,500

Comec Model MMS-2000 Twenty (20) Spindle Horizontal Slot MortiserSpecifications -- Spindle Speeds 4,500 and 9,000 RPM/Min. -- Single Oscillating carriage with dovetail profile, 2,000 mm (78.75") length -- Oscillation motor, 3 PH -- Min./Max. spindle center-to-center distance: 55/1,945 mm (2.16" - 76.57"). -- Five (5) motors for spindles power 4.0/3 HP, with two speeds. -- Advancement of the spindles on guides with balls recirculation with pneumatic cylinder and hydraulic brakeEquipped with & Features -- Adjustable table 8" Wide X 87" Long -- Locking cylinders and Four (4) Pneumatic Holddown ClampsNote from the seller -- Production 300 - 400 pieces per hour

 704-841-2001

 Call
Comec 20  Mortiser
$46,000

Comec MMS-2000 Twenty (20) Spindle Horizontal Slot MortiserSpecifications --Spindle Speeds 4,500 and 9,000 revs/min --Single Oscillating carriage with dovetail profile 2,000mm (78.75") length --Oscillation motor 3PH --Minimum/maximum spindle center to center distance 55/1,945 mm (2.16"-76.57")Equipped with & Features --Five (5) motors for spindles power 4.0/3 HP with two speeds --Advancement of the spindles on guides with balls recirculation with pneumatic cylinder and hydraulic brake --Adjustable table 8" Wide X 87" Long complete with locking cylinders and Four (4) Pneumatic Holddown Clamps --Production 300-400 pieces per hour

 704-841-2001

 Call
Dincmak DMT120  Mortiser
$7,500

Dincmak Model DMT120 Double Sided Slot MortiserSpecifications -- Max Mortise Width: 120mm --Max Depth: 50mm --Max Workpiece Height: 100mmEquipped with and Features -- Two Independent Working Table w/ up to 45 Degree Tilt -- Oscillation Motor: 3/4HP (.55kW) -- Cutting Motor: 4HP (3kW)

 704-841-2001

 Call
Maka RDB-5  Mortiser
$11,500

3-Head oscillating chisel, 96" long table, 1.8 HP each head, all heads adjustable side to side. -- Mortise cap.: 3/4" min. x 7" max. length, 5/64" min. x 7/8" max. width, 4" max. depth. -- Complete with: (2) Horizontal & (3) vertical pneumatic clamps, and foot pedal; table advances hydraulically for mortise cutting. -- Oscillation heads and infinitely adjustable table feed speed. -- No Tooling is included. -- Includes: Heads were fully rebuilt and has had minimal, only about (10) hours of use since.

 704-841-2001

 Call
Newman T-20  Mortiser
$4,050

Newman T-20 MortiserSpeifications -- 0.5 HP Motor, push button magnetic starter, foot treadle operation, with compound tilting table, manual holddown.

 704-841-2001

 Call
Oliver 92-D  Mortiser
$8,625

OLIVER - 92-D: MortiserSpecifications -- Bit/chisel capacity: 1/4 - 3/4"; stroke from: 2-1/2 - 4"; shank size: Up to 3/4".Equipped with & Features -- 5 HP - 3,450 RPM Motor; power feed provides: 16 - 40 Strokes/Min. -- Push-button controls for: Operation of the (2) motors. -- Universal compound table. -- 6" Wide x 36" long; moves horizontally by rack & pinion; table can be tilted or clamped up to a 45° angle, either right or left for angle mortises.

 704-841-2001

 Call
Wysong  &  Miles 284  Mortiser
$5,625

Wysong & Miles NO. 284 Vertical Chisel MortiserSpecifications -- 1-Head, 5 HP direct drive motor, rack & pinion table adjustment; -- Table size 8" x 42" and tilts to right or left up to 45ø, -- Moves 13" laterally, 12" vertically and 3-3/4" cross-line. -- Max.depth 4-1/4", max. chisel shank 1-1/8" dia., smaller chisel require bushing, 5/8" straight bit chuck.Equipped with n& Features -- The table is raised and lowered by means of a crank. -- A quick acting screw type clamp holds material securely in position , smaller chisel require bushing, 5/8" straight bit chuck.Note from the seller -- Having spent it's entire life in humid Florida this 284 has a Levi’s blue jean patina on it’s painted surfaces and well seasoned cast iron from environment and age. Quiet running! Mechanical power feed,

 704-841-2001

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved