CAM-WOOD WX-1510 Vertical Grinder-ShredderImpact resistant tooling with excellent wear capability. Specifications & features: -- Vertical-feed Chute, 10 HP - 1,750 RPM drive motor; 15" x 11" infeed chute; (6) rotary cutter sets & (2) counter-knives with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: -- 300 - 900 Lbs/Hr, depending on material and moisture content. -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD WX-2404HCX Horizontal Grinder w/ConveyorImpact resistant tooling with excellent wear capability. Specifications: -- Horizontal feed with (2) 1 HP infeed roller motors; 30 HP - 1,750 RPM drive motor; -- 24" x 4" Infeed chute; 8" dia. air discharge.Equipped with: -- (30) Rotary cutter sets with cutter head angle to allow aggressive cutting rates and high-speed shredding of waste; -- (4) Stationary cutter sets; 10" dia. rotor; 680 RPM. -- The shaft rest for the cutter head is constructed by a round hollow with a special angle for cooling during production. Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD WX-4150 Vertical Grinder-ShredderImpact resistant tooling with excellent wear capability. Specifications & features: -- Vertical-feed Chute, 50 HP - 1,750 RPM drive motor; 41" x 12" infeed chute; (12) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: -- 1,300 - 1,800 Lbs/Hr, depending on material and moisture content. -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD WX-4751 Vertical Grinder-Shredder Specially designed with push ram, powerful crusher for different materials such as wood, MDF, particle board, plastic, rubber, corn cob, etc. Specifications & features: -- Vertical Hopper 47" x 51"; 50 HP - 1,750 RPM drive motor; (96) rotary cutter sets & (6) stationary cutter sets; cutter-head angle cutting design allows aggressive cutting rates & high speed shredding of waste with maximum durability; 85 RPM rotor speed. -- The shaft rest for the cutterhead is constructed by round hollow with special angle to keep cooling for long hours of usage. -- Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD TG-923 1:1 Profile Knife GrinderEconomical model built for shops with 1 or 3 Moulders or a series of Spindle Shapers.Features: -- Work table and cutterhead moves front to back and left and right. -- Table travels on linear bearing with cross roller rail sets. -- Table travel is designed for extreme accuracy. -- Template holder setup is fast and simple for copy tracer. -- Grinding angle is adjusted on dovetail ways. -- Grinding center DOES NOT change with knife angle adjustments. -- Includes stainless steel water splash guard, coolant tank; with pump and filter, easy and efficient to operate. -- Heavy steel cabinet and stand. -- Cast iron Grinder body. -- Built for high precision and durability.Specifications: -- Grinding Capacity: 12"; dia. x 10"; long. -- Grinding Wheel Size: 7.5" dia. with 60 mm bore. -- Grinding Head Travel: 13". -- Grinding Wheel Speed: infinitely variable from 1,500 to 4,500 RPM. -- Grinding Wheel Motor: 2 HP. -- Coolant Pump Motor: 1/8 HP. -- Net Weight: 1,100 Lbs.

CANTEK JF-330A Profile Knife Grinder Clamping length of 12" (300 mm) for both straight and profile grind; dia. of knife swing 12" (300 mm). -- Grinding Arbor: 3 HP grinding motor with VFD (LED Readout) drive from 1.500 to 4.200 RPM. Quick change removable (140 mm) wheel adapter. Machine set for axial constant grinding and template set up on right-hand side.Over the wheel precision diamond dresser assembly for dressing and dimensioning of wheel. Manual positioning: of grinding wheel to tool; positioning of back clearance angle and side clearance angle 5°/10° and 15°. Quick change stylus turret for applications; (6) included with machine. -- Carriage: SCHNEEBERGER linear bearing table movement. Table movement 12" x 6". -- Coolant system: 1/8 HP motor from coolant pump located in the tank below; (3) coolant nozzles for smooth flow of coolant to knife rest during grinding. Additional hose with nozzle for cleanup. Stainless steel splash guards throughout! -- Includes: Set up tools, coolant, HD worklight, grinding wheels and (1) arbor of choice - (1.25", 1.5", 40mm, 1-13/16", 2.125" or 50 mm).

CAROLINA BULK BAG FILLING MACHINECarolina Conveying filling stations are used to safely and efficiently load bulk bags. A filling head with an inflatable seal is used for dust-tight loading of the bulk bag, and bolts to the adjustable height framework. The inlet to the filling head is connected to the customer’s equipment above via a flexible tube. The bag spout is secured to the outlet with an inflatable seal. The seal inflation is controlled by a manual on/off spool valve, which pipes air to the unit. A cavity around the outerperimeter allows displaced air and dust to exit the filling head through a dust extraction nozzleSpecifications & Features: -- Rated for 5,000 Lbs, Bag fill up to 4000 Lbs. -- Platform size 48" x 48" -- Bulk Bag Filler Stations are used to safely and efficiently load bulk bags. -- A filling head with an inflatable seal is used for dust-tight loading of the bulk bag, and bolts to the adjustable framework height. -- The inlet to the filling head is connected to the customer's equipment above via a flexible tube. -- The bag spout is secured to the outlet with an inflatable seal. -- The seal inflation is controlled by a manual on/off spool valve, which pipes air to the unit. -- A cavity around the outer perimeter allows displaced air and dust to exit the filling head through a dust extraction nozzle. -- Support frame with adjustable rack. -- Support arms; Four adjustable height arms for loop-type bags. -- Inlet 8" round flange, ASA 150 Bolt hole pattern. -- Inflatable seal; White seamless gum rubber tube. -- Dust spigot 3" o.d. tube - 71 -- Weight platform with Digital Scale - 84 -- Output for digital readout is included - 7185

CRESSWOOD HF-30-30 SR Low RPM Waste GrinderEquipped with: -- 30 HP Drive motor, 10" Rotor dia; 30" Rotor length, (42) indexable, replaceable cutter inserts. -- The cutting chamber is 30" x 39", hopper volume is 1.25 cu. yards, and floor area of the unit is 89" x 66". Features: -- Ram assembly includes a machined ram with a 26" ram stroke, premium quality top and bottom guides, and an oversized cylinder rated for 3,000 PSI (over twice its operating pressure). Complete with: -- PLC control with load sensor; hour meter, digital cutterhead amp meter, auto-reverse at start-up.Note: the knives might need to be replaced. The knives on the rotor are "flats" designed for particle board shredding. To do hardwoods/softwoods, he will need to rotor a new full set of cupped inserts/knives

CRESSWOOD HF-60-75 Hopper Fed Low RPM GrinderRecommended for wood waste, whole pallets, plywood, particle board and other similar products. Equipped with: -- 75 HP motor; low noise, 78" x 60" cutting chamber, 60" ram stroke, 16" dia. rotor x 60" long, 98 RPM grinding speed; Features: -- 1" Steel frame thickness, 4-1/2" shaft diameter, (100) cutting tooth "Destroyer" cutting head, replaceable anvils; 5/8" screen. -- 14' x 10' Floor space, approx. 18,000 Lbs shipping weight.Includes: -- Inclined discharge conveyor with crossbelt magnet; 9.5' x 8' x 3' extended hopper opening; electrical control panel, PLC controlled hydraulics, 3 HP hydraulic unit, fluid clutch on drive; auger discharge..

Custom Built Disc Scalper;Includes the following features: --3 Ft. Wide X 10 FT. Long. --Fitted with 9 Rows of Discs, shaft mounted. --Drive Chain connected Row-to-Row. --Motor Platform (no motor or reducer). --Mounted onto a Steel Frame. --Bottom and End Discharge.

EARTH CARE PRODUCTS, INC. "DB-1030" (10.5 Ft. x 32 Ft.) TRIPLE-PASS DRYING SYSTEM, W/GAS BURNER:Complete with the following major components: -- 10.5 Ft. x 32 Ft. (despite the model DB-1030) Triple-pass Insulated drum. -- Trunnion Bases, and 30 HP Drum Drive. -- High efficiency Cyclone, Cyclone outlet Airlock. -- 100 HP Dryer Main Fan, and Ducting. -- 25 MM BTU Gas Burner complete with Refractory Lined Furnace and Gas Train. Notes: The Trunnion Tracks and Trunnion Wheels are in good condition as is the drum interior. The system was renovated in 2015 and not used much after the work was done. The equipment is still in-place.

VALVE BAGGER ECC 770MODEL 770 FORCE FLOW PACKER: -- Pressurematic Gross weighing air actuated valve bagger with positive air pneumatic circuit, air operated pinch tube cutoff, manual bag chair, mild steel construction.STANDARD SPECIFICATIONS: -- Manual start switch, 12″ butterfly valve, and actuator, Dust collection connection, Scale beam weighing, 3-way separate exhaust, Filling spout as per your bag specifications, 8″ x 12″ sight glass in the upper chamber.AVAILABLE OPTIONS, PRICE QUOTED ON REQUEST; -- (1) Low-pressure air pump assembly, consisting of 5 HP motor and "Roots 36" rotary pump, complete with inlet filter silencer and discharge silencer, pressure weighted relief valve. 197 CFM @ 6 PSIG maximum air requirements. Does not include a starter. Uses 3-phase power. -- (1) Electronic weighing, with Rice Lake 920i digital controller, 500# “S"; load cell. -- (1) Bulk and dribble cylinder, interfaced to electronic weighing controller. -- (1) Power discharge chair, for use with a conveyor. -- (1) 304ss Contacting surfaces.

ECC SR 206 AUGER VALVE BAGGERGross Weighing Auger Valve Bagger with Air Actuated Bag Clamp, Manual Bag Chair, Mechanical Scale Weighing, Mild Steel ConstructionSpecifications: -- 5 HP TEFC Motor -- Nema 12 Electrical Controls, with Forward and Reversing Starter. -- Scale Beam Weighing (mechanical weighing), Weight range 20 Lbs to 110 Lbs -- Filling Spout as per Specification (Recommend 3" OD for 5-1/4"+ Valve Bag) -- Manual Chair -- V-Hopper for Free Flowing Products. -- Loaded on your truckOptions Available ( not included in selling price) -- Electronic Weighing -- Spike Agitator in Primary Hopper -- 304SS Contacting Surfaces -- Loaded on your truck

SPECIAL FEEDER FOR HAMER 2080FFS BAGGER -- Hopper 37 Cubic Feet and Support -- With Scale Support System -- Belt Feeder with Discharge to Existing Hamer Form-Fill and Seal -- Brand New -- Loaded on your Truck

COMPLETE LOOSE BAGGING SYSTEM System includes: -- Feed Hopper 3 Yards Capacity. ( 87 Cu.Feet) -- 24 feet Incline Conveyor. -- GB Mechanical Bagging Scale -- Feeding Hopper 37 Cu.Feet with Stand. -- Packrite Xtrol Impulse Sealer. -- Motorized Bag Conveyor. -- Loaded on your Truck.

EXPRESS SCALE MCRS-180ELECHYD LOOSE BAGGING LINEComplete Loose Bagging Line including the Following; -- Hopper Stand and Support 37 cu' BF/GV/AUG -- GB Bag Fill Machine -- BF-14 Belt Feeder -- Bag Closing Conveyor 510-LP -- Fishbein Sewing Machine -- Hopper 87 cu' with Support -- Belt transfer Conveyor 27' -- Loaded on your Truck

LOOSE BAGGING SYSTEM "MCSRE"System includes and is supplied with: -- Hopper BF 87 Cu/Ft. and Support, Charging Hopper to Integrate with product Delivery Conveyor -- CON PD 24X24: 24 Feet Product Delivery Conveyor -- Hopper Stand BF: Hopper and Support 37 Cu/Ft. Surge Hopper for 5 GV Duplex Net Weight Bagging System -- GV-52 - DUPLEX GRAVITY/VIBRATORY TRAY: Duplex unit for (20) Bags/Minute -- Spout to Meet Customer's Bag -- CON 512: Bag Closing Conveyor. 12 Feet Long -- PACKRITE XROL: Heat Sealer with Extra Set of CO.Loaded on your Truck

MCRS is a Bagging System for mulch, compost, rock, or sand. This system is complete with a 2-yard product surge hopper, a 20' X 24" wide troughed incline product delivery conveyor with a cleated belt, an 8' bag closing conveyor, and a custom 7.5 HP Elec/hydraulic power unit. The system can fill bags by time and depth of stream or digitally with load cells.Standard construction carbon steel Powder Coated Industrial Gray(RAL 7046).The MCRS operation has been designed for one man to bag fill, bag close, and stack three bags per minute continually. -- The operator hangs bag #1 on the scale, hits the palm switch to close the CG spout, and automatically fills it. -- Bag #1 will drop once the timer times out onto the moving conveyor and hangs bag #2 into position, hits the palm switch, and starts the filling. -- The operator steps to his left. Bag #1 contact a wand switch and is in position underneath the impulse sealer. --The operator starts the bag into the impulse sealer. Once completed, bag #1 is then manually stacked. -- Bag #2 filled and waiting for the operator's return. -- Bag #2 is then released, and bag #3 hung. -- The process is then repeated.The Front End loader feeds the system. Consists of the following --infeed hopper --incline conveyor --dosing system --bag closing system:Bag Closing System Consists of a (CON 508) 8' long x 1' wide smooth top belt to take bags into aposition where a wand switch manually stops them. The bags are then prepared and enteredinto theImpulse Sealer (31103737610) Programmable Impulse Sealer for the repeated sealing of thermoplastic films such as polyethylene and polypropylene. This automatic single-impulse heat sealer is controlled by a plug-in transistorized circuit board and electronic timers. The timed closure ensures an even and consistent seal. --THE PRICE REFLECTS AN UPGRADE FROM THE IMPULSE SEALER TO A SEWING SYSTEM.The operator has hands free to handle the product quickly. This type of machine generally increases workers' productivity.The electric foot pedal is included for manual operation. -- Seal Length: 24" -- Seal Thickness: 8 mil -- Seal Width: 10 MM

Bag Turner & Knockdown with Conveyor Hours used since purchase = 0. -- Model: 5’ TURNER. -- Motor: 1 HP (0.750 kW); 575 V /3 PH / 60 TEFC.All electrical motors, cabling, & panels meet: Zone 22 Explosion proof classification. -- Dims.: 72"; L x 55"; W x 51"; H; weight: 600 Lbs.

Express Scale RW-14V Gravity Fill Bin Weighing System (Open Mouth Bag Vibrator)Hours used since purchase = 0 -- Surge Hopper 70 ft³ & Open Mouth Bagger 14" with Vibratory Feeder and Dual Agitators to eliminate bridging. -- Model RW-14V - Scale support system and operator interface for automatic bag weighing and loading. -- Hopper motor #1 0.5 HP (0.375 kW) 115/208V TEFC. -- Hopper Motor #2 1HP (0.75 kW) 115/208V. -- TEFC - 115V for vibratory feeder and scale. -- All electrical motors, cabling, and panels have been retrofitted by TriQuest electrical contractor in NS to meet Zone 22 explosion-proof classification.Items that are crossed out are no longer with the system. The bag sealer is no longer with the system but can be purchased separately.