REM - CC10, ...Used Can FlattenerThe REM Can Crusher is a complete separating, crushing, and blowing unit for aluminum cans.Specifications: -- Efficiently processes: 1,800 - 2,000 Lbs per hour. -- Load cans in the hopper and the conveyor carries the cans across the magnetic head pulley separating the steel from aluminum. -- The aluminum cans are crushed between a steel pressure plate and the rotating crusher drum with hardened steel bars; the cans then drop into a high-velocity air stream and are blown into a trailer or storage container. -- Features: 16" Wide belt; Crusher with: 10 HP 240/480-Volt, 3-phase; Blower with: 7.5 HP 240/480-Volt, 3-phase.

RETHPAK - HC-2020: Form-Fill and Seal Bagging LineComplete Form-Fill and Seal COMPRESSION Bagging System Specifications -- Model "HC-2020" Form-Fill & Seal Compression Bagger. -- Up to (7) bags per minute. -- Bag Size: 12" x 18" x Up to 32" long. -- 60" Max. film width. -- Optional film cart included. -- Cyclone & stand. -- Walking floor Trailer with: Blue Auger conveyor. -- Control Panel: MCC. -- Hydraulic Tank. -- Tires for walking Floor Trailer. -- Blue piping & stands. -- Transfer auger Conveyor and Surge Bin. -- Auger from Surge Bin to Bagger. -- Transfer Belt. -- Stacking Unit & outfeed roll case. -- Roll lifting device. -- Shrink Wrapper.Decommissioned & all associated wiring removed by Contractor.

ROBUST SD 45 Vertical Low Noise Grinder; The model SD 45 is characterized by low power consumption, high productivity, and ease to use.Features: -- Universal use (diverse wood, particle boards, veneer, MDF plates, cardboard boxes, plastics, etc.); -- Completely automatic operation -- The engine start-up is controlled by the star/triangle system -- Hardened knives with four cutting edges with an extended service life -- The crushing unit without any mechanical obstacles that could cause stopping -- The HARDOX sieve -- Simple installation, plug-in and start-up -- Economic use of energy -- Extremely quiet operation -- Simple and minimum maintenanceTechnical Specifications: -- Motor: 20 HP (15 kW) -- Rotor diameter: 150 mm -- Rotor speed 140 RPM 140 -- Number of knives: ) 17 (15 + 2) -- Top opening 640 mm x 430 mm ( 25.2" X 17") -- Dust extraction size 152 mm diameter -- Weight 950 Kg (2090 Lbs) -- Screen with holes available from 10 to 50 mm (comes standard with 12 mm screen) -- Production capacity: Approx. 0,5 - 1,5 Cubic meters per minute

ROBUST SD 60E Low Noise Vertical GrinderFeatures: -- One-piece machined cutterhead without welding for increased accuracy in knife fastening. -- The inserts can be used on their four (4) sides, which reduces operating and tooling costs. -- Overload protection. -- Several dimensions of HARDOX Screen available according to your requisitions.Technical Specifications: -- Motor (18.5KW) - 25CV/600V/60C/3Ph -- Top opening 946 mm x 567 mm (37" X 22.3") -- Cutterhead diameter 222 mm -- Cutterhead speed 80 à 120 RPM -- Quantity of TCT tips 14 ( + 2 latéral) -- Productiion capacity 3 à 4 m3/hour The capacity varies according to the dimensions of the grill, the type of wood and its humidity rate . -- Rear screen dimensions of holes 10 à 30 mm -- Dust hood 160 mm -- Machine dimensions 1881(L) x 1115(W) x 1670(H) (70" X 44" X 65.7")

ROBUST SD 70 Low Noise Vertical Wood Waste GrinderBasic machine features: -- BOVER_BASIC intelligent control system -- Power set (electric motor, reduction gear, and belt transmission) -- Vertical hopper -- Hydraulic pressure unit -- Robust and adjustable -- Hardened knives with four cutting edges with an extended service life -- Hardened cleaning knives -- Hardened cutting racks -- HARDOX sieve -- The motor start-up is controlled by the star/triangle systemTechnical Specifications: -- Main motor 30 kW (40 HP) -- Top Opening: 1445 mm × 1345mm ( 56.8" X 53") -- Rotor working length: 650 mm -- Rotor diameter: 270 mm -- Number of knives: 28 -- Screen hole diameter 10 - 50 mm -- Production capacity: 3 - 5 Cubic meter -- Weight : 1,750 Kg (3,850 Lbs) -- OAL 1973 mm X 1548 mm (77.6" X 61")

SANDVIK - QJ241: Jaw Crusher -- New in 2015. - Tier 3 Engine. -- Productivity: Highly productive; 1,000 x 650 mm; 40"; x 26"; jaw opening for maximum throughput. -- Hydraulic CSS jaw setting adjusted using control panel or handset; to avoid interruptions. -- Load sensing system for feeder drive & jaw level sensor ensures continuous crushing. -- Ideal for Recycling with: Reverse crush, overband magnet, and hydraulic raise & lower facility on main Conveyor for rebar clearance.

SAS SCORPION ENGINE PULLER Model SC40 DescriptionIncrease cash recovery from your recycling operationsSAS Forks Scorpion High Speed Motor Puller – Scrap Yard Engine Puller – Auto Recycling Engine Puller – Excellent for self service yards processing vehicles before crushing.Generate revenue:Process end of life vehicles in less than 60 seconds.Pull scrap engines and transmissions in 30 seconds.30% more revenue by separating metals from bodies.1000% more revenue per lb. on wire harness from engine compartment and dash.80% more visibility with a direct line of site from the operator’s window through the forks.Cycle time less than 15 seconds from park to full extension.Serviceable for long life. Replace blades in 3 hours or less.estimated only.Engineered & built for optimum performance:Engineered tough for continuous prying and durability.Hardened pins and bushings and grease-able pivot points for extended service life.Hydraulic hoses and cylinders are protected to minimize potential damage from sharp objects.Built with high strength blades and carriage skid plates for extended service.Clean up of ground debris is a snap with center plow blade.Speed is paramount in this design. Operator uses grapple from the cab, no torches, no personnel needed to hook up chains to pull or move engines. Safer, quicker and less costly removal of engines and transmissions.

SCHUTTE BUFFALO - Model WA16L, ... HammermillModel# WA16L, 3500 RPM, with filtration system and multiple grates for destruction sizes. -- It also includes Electrical panel. -- This system is apart and palletized. All you have to do is pick it up and transport it to you. -- System was in perfect working order when it was taken apart and palletized for transport. -- The system is perfect for the destruction of computer hard drives and different types of media.

SEDA T-REC XXLTechnical Data --Tire dimensions 13″ – 22″ Steel/Aluminium --Max. working pressure 2364 psi --Voltage 230 V / 3 x Ph + N / 5,5 kW / 60 Hz --Dimensions 90.5 x 51.2 x 59″ --Weight 2756 lbsBenefits --Suitable for all tire types (including Run Flat) --Rim sizes up to 22 inches (aluminum and steel) --Quick disassembly --Guaranteed destruction of tires and rims --Laser-assisted alignment

SHRED-TECH - ST50, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 20 HP. -- Cutter width: 1" Approx. -- Cutting Chamber: 20" x 35". -- Control Panel. -- Mounted on stand. -- Feed Hopper: 21" x 40" Opening.

SHRED-TECH - ST20, ...Dual Shaft ShredderSpecifications: -- Motor: (1) 20 HP. -- Cutter width: 3/4" Approx. -- Mounted on stand. -- Feed Hopper.

SHREDPAX AZ-45 Dual Shaft ShredderSpecifications: -- QTY 2 20 HP Motor -- Voltage 480 V, 60 Cy, 3-Ph. -- Dual Shaft -- Support Stand IncludedLoaded on your truck

SHRED-PAX - AZ-80, ...Shredder -- Dual Shaft Shredder. -- Motors: (2) 40 HP. -- Blades: 1" Width; (26) blades total. -- Crescent Moon Ram Assist. -- Ram rebuilt. -- Loaded onto your Truck.

SHRED-PAX AZ160 USED DUAL SHAFT SHREDDER W/ CONTROL PANEL --Chamber Size: 44" x 96". --Motors: Two 75 HP motors. -- Includes Control Panel

SIEMENS - 75 KVA; 480 - 380Y/220 Volt 3-Phase Dry Type TransformerSpecifications: -- General purpose: Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 3R ventilated; for indoor or outdoor use. -- Multi-tap (432-504): Primary 480 V (Delta); Secondary 380/220 Volt; Y - 60 HZ ventilated. -- Aluminum winding material. -- NEMA Class: ANN. -- Catalog #: 3F6Y075FCD16.(2) Available; priced per unit; make offer for both!

6 Ft. x 20 Ft., Single-Deck Vibrating Screen;Complete with the following features: --Counterweight type Drive with TEFC Motor. -- Food grade construction throughout. -- Accessible hinged Feed Box. -- Dust Cover. -- Double-crowned Screen Ball Deck with (6) Wire Screens. -- Total screening area of 6’x20’. -- Fines Collection Hopper with Discharge Spout. -- Factory Frame. NOTE: This is a single-cut screen for two outputs. Never Used.

ALJON - IMPACT V, Used Car CrusherElectric but includes generator and trailer, Includes RemoteOnly 1,470 HoursSpecifications: -- 40-Gallon Diesel Tank. -- Loading Area: 84" W x 240" L. -- Overall Dimensions: 43' L x 8' W x 13-1/2' H. -- 8" Bore cylinder, 5" dia. shaft. -- 81" Stroke cylinder. -- 301,600 Lbs Total combined Cylinder Force. -- 3,250 PSI.

ALLEGHENY 20-350C DOCUMENT SHREDDERSpecifications: -- 40 HP Motor -- 7/16" Cut Width -- Feed Opening 20" -- Dimension 70" x 107" x 55" -- Weight 6,295 Lbs

ALLEGHENY - 18-250C, ...Paper Shredder -- 20 HP Motor -- (250) Sheets per pass -- 1/2" Straight cut -- Loaded onto your Truck

AMERICAN PULVERIZER Model "TRS" Portable Shredder with BHS Trommel and ConveyorSpecifications: --400 HP Portable Tire Shredder --Diesel motor, hydraulic conveyors. --Everything except infeed conveyor Mounted on a trailer. -- BHS Trommel