SWEED MODEL 517 SCRAP CHOPPER With Dump HopperFeatures: --The Model 517 XHD provides a large cutting capacity. This is the chopper of choice for custom applications or for operations converting substantial quantities of linear scrap materials. Prepared for an abusive environment, the 517 XHD has a strong 1/2"; plate steel housing. The 517 XHD also features a magnetic starter to protect workers from an unexpected restart after loss of power. The powerful air activated feedworks is controlled with a footswitch for operator safety, and is also capable of despooling scrap wire and cable from reels. --Additional safety options are available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. Please consult a SWEED representative to determine the appropriate scrap chopper for your application.» High-tensile bale wire» Small, solid, aluminum and copper bars» Jacketed and non-jacketed wire and cable» For other materials, consult SWEED --Electric Motor 5 HP --Infeed Opening 6 "; W x 1 "; H Cut Length 3 ½"; standard (smaller cut lengths available with different knife configurations) --Number of Stationary Knives 1 --Number of Rotating Knives 1 standard --Overall Chopper Dimensions 56"; L x 34"; W x 30"; H --Chopper Weight 1,492 lbs --Chopper Shipping Weight 1,577 lbs -- Include Stand and Gaylord

TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx. 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft

TREMZAC 248-TR-CO Portable Shaving Mill [email protected] supply; 65 HP from P.T.O. of tractor at 540 RPM (not included ). -- Emergency shutdown included. -- Log; 5" to 22" in diameter x 96" long. -- Capacity ( shaving ) 5 to 19 cubic yards/hour. -- Hopper Magazine; 24" wide x 96" long. -- Double Axle Trailer with hydraulic brake included. -- Cutter head 24" with (8) knives -- Dimensions; 7' 3"' wide x 31' 3" long.

UMP - BP 450 A: 450 kG/Hr Briquette PressSpecifications: -- Cap. 450 kG/Hr (992 Lbs). -- Max. pressure: 1,700 kG/cbm (24,175 PSI). -- Max. chip moisture content: 15%. -- Max. chip size: 15 mm (0.59"). -- Wood shaving to briquette ratio: 10 to 1 (using mahogany). -- Briquette configuration: Rectangular. -- Briquette length: 40 - 105 mm (1.57" - 4.13"); Briquette width 150 mm (5.91"); Briquette height: 60 mm (2.36"). -- Briquette heat energy: 4,200 kCal/kG (7,558 BTU/Lbs). -- Hopper size: 31"; x 36"; x 36"; with: 1-Side sloping so cutaway from cube of 18"; x 36";; mounting flange at top allows additional capacity to be added.Equipped with: -- Automatic material density adjustment. -- Automatic hopper shutoff. -- SIEMENS PLC Control.

100HP Single Shaft Shredder With Infeed and Discharge ConveyorsSpecifications: --100 HP --Includes Infeed Conveyor- 50" Wide x 37’6"; Long, Sides 20"; high --Includes Discharge Conveyor - 47" Wide x 16' Long

MOTORIZED PALLET CONVEYOR -- 48" X 10 Feet -- Motorized with 3/4 HP Motor -- To be use as an Accumulation Conveyor -- Loaded on your Truck

UNTHA RS40-1000-37 QUAD SHAFT SHREDDER -- 1000 mm (39") cutting chamber -- (2) 30 HP motors -- 480 volts UL controls -- Wear lined, cast steel sidewalls -- 29 mm cutting system with 2 tooth main cutters -- Mechanical seals -- 60 mm screen with Hardox baskets -- Shimmed screen for position control -- Automatic central lubrication -- Quick change screen -- Brand new with warranty -- Loaded on your truck

UNTHA RS 40 QUAD SHAFT SHREDDERSpecifications: -- 60 HP -- 40" x 30" Opening -- Auto Reverse push button controls -- Base support structure -- Feed Hopper -- Unique 4-shaft design & integrated screen process. -- Most materials in one pass, where other machines require multiple stages of processing -- Approx. 1700 hours

UNTHA RS 30 QUAD SHAFT SHREDDERSpecifications: --Conveyor Brand Battery Recycling System 2,000 LB --UPENDER SCISSOR Lift Table HYDRAULIC Discharge Conveyor -- 30hp -- Auto Reverse push button controls -- Base support structure -- Feed Hopper -- Unique 4-shaft design & integrated screen process. -- Most materials in one pass, where other machines require multiple stages of processing

V-HOLD - MF-2230, ...Profile Grinder.Technical Specifications MF 2230: -- The max. dia. of the cutterhead is 300 mm. -- Max. profile length: 300 mm. -- Movement of a desktop: 45 mm. -- Sharpening angle: ± 30°. -- Grinding wheel dimensions: 225 x 32 mm. -- Grinding wheel rotation: 2,800 - 4,000 RPM. -- Total power: 1.59 kW. -- Dimensions: 1,260 x 1,250 x 1,830 mm. -- Weight: 560 kG.

VECOPLAN RG 42-40 SINGLE SHAFT SHREDDERSpecifications; -- 40 HP MotorVecoplan ShredderModel: RG 42/40 XL PVYear: 2007Motor: 40 HP, 460V, 60HZRPM: 1465Feed Opening: 42" x 48"Blades on rotor: 27Weight: 3,700 lbs

VECOPLAN - RG52-40SWU Single-Shaft Shredder w/hopper, screen, and control panel -- COMPLETE Rebuild. -- 52" x 48" Feed opening. -- (37) Cutters. --÷ Motor: 40 HP; "new" motor. -- Control panel -- New hydraulics. -- New cutters. -- New bed knife. -- New guide rails. -- New wipers. -- Sandblasted and freshly painted. -- Loaded onto your TruckNote: We also have blowers, airlocks, cyclones, and piping.

VECOPLAN VAZ 145/250 SINGLE SHAFT SHREDDERSpecifications; -- 575v 3 Phase --Hopper opening: 57 x 98.58 in. --Rotor width: 98.58 in. --Rotor Diameter: 14.56 in. --Rotor speed: 200 rpm --Main Drive- Electric motor with power belt drive --Gear ratio: i=5 --100 hp --Motor current: 192 A --Dimensions:- Shredder: 184"L X 141"W X 108"T- Chute: 160"L X 128"W X 76"T- Panel: 73"L X 50"W X 25"T

Low Noise Grinder with Horizontal Feed; 50 HP Main drive motor, 16" diameter rotor with (24) 40 x 40 cutters; top & bottom knurled infeed rolls control feeding. -- 5" x 18" Infeed opening; 390 RPM rotor speed. -- Includes: (1) 18" Wide x 6" deep x 16' long vibratory horizontal infeed conveyor; sizing screen with 7/16" screen hole. -- Approximately 10,163 hrs on this unit.

VECOPLAN RG52/60 SINGLE SHAFT SHREDDER Includes Box Dumper and ConveyorsSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 37 --Drive Motor: 60 HP --Box Dumper / Table --Infeed Conveyor --Discharge Conveyor for Gaylord Box Loading

VECOPLAN RG 70/200K Shredder with Steel Belt Conveyor & Dust CollectorSpecifications: -- Hopper Opening: 70″ x 80″ -- Hopper Volume: 4 – 6-1/2 Cubic Yards -- Main motor: 200 HP -- Rotor diameter: 20″ -- Number of cutters: 84 (triple row) -- Size of cutters: 40 mm x 60 mm -- Screen size: Holes 2″ -- Rotor speed: 145 RPM -- Rotor diameter: 20″ -- Hydraulic Feed Ram: 10 HP - 2-Speed -- Throughput: 2,000 – 28,000 Lbs/HrEquipped with: -- 10 HP Motor Dust Collector -- 48″ W kW SCHMIDT Shredder Infeed Conveyor w/ 20′ pit section

VERVILLE 6-SCREW HOLDING BINSpecifications: -- (6) Motorized 14-1/2" Diameter Bottom Screw -- (1) Motorized 14-1/2" Diameter Exit Screw -- 11 Feet Long -- 16 Feet Wide -- 18 Feet High -- 12 Feet High Support LegsDismantled and Loaded on Truck

VERVILLE - 95-VP-438SE-CCW-35/125I: 4-Station Bagger complete Automatic Bag Placement and Bag SealerComplete Line was used for wood shavings only. The Line is in operation at the time of this write-up.The VERVILLE - VP438-CCW: 4-Station compression Bagging System designed for high-efficiency bagging operations.It features: High tubes of 125". Automatic plastic bag sealing Ability to handle bag sizes ranging from: 11" x 17" to 30" High.This System is often used in industries like: Biomass and Packaging. It also includes features: Oil tank heater and a Modem for remote monitoring.Bagging Capacity -- Handles bag sizes ranging from: 11" x 17" to 30" high. -- Automatic feature: Automatic plastic bag sealer for seamless operations. -- Height: System features: High tubes of 125 in., making it suitable for large-scale bagging needs. Additional Features -- Equipped with: Oil tank heater; modem for remote monitoring ensuring smooth and efficient performance.The control box is mounted on the side of the automatic Bagger with: ALLEN-BRADLEY Panel View 550 unit. -- Main 4-section Bagger: 125 " Tall. -- Main master control cabinet. -- Long 45° screw auger to feed from: Bottom of the Sifter to the top of the Bagger -- Master hydraulic tank & pump arrangement with all hoses. -- Full sealed bag auto. discharge conveyor belt & turning roller Conveyor. -- Sifter with: Canvas wrap cover. -- Screw Conveyor: Runs from under the outside dust Collection System rotary airlock: Drops the “good"; wood chips down to the 45° screw with “light dust" going out thru the Screw Conveyor into an open Dump Trunk outside.IMPORTANT ISSUESThe machinery requires a new Electronic Board & Computer with Software. Computer & Software is available, but it has to be programmed for this machine.Total HP: 75Price Includes: Loading on a Truck

WEIMA ZM-30 Quad Shaft 4-Shaft ShredderEquipped with: Model- ZM 30 S -- Unit was used to shred wire (6,000 – 8,000 lbs per hour) --20mm screen included 25 HP x 2 --480V- 3 phase --Cutting chamber is 19"; x 27"; Hopper is 33"; x 48"; --The ZM30S is a beefed up version of the ZM 30. Unit has the same size motors, shafts and cutters as the ZM 50 but with a shorter shaft length

WEIMA WL-6 Low Noise Vertical Hopper Waste Grinder Specifications: -- Low noise hopper-fed grinder with a 10" dia X 31.5" long rotor and a 24HP drive package that includes a 2-sided flared hopper. -- Vertical 1.3 cubic yard hopper with 31.5" x 39.2" (800 mm x 900 mm) opening. Equipped with: -- (21) Recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear. -- Rotor operates at 80 - 100 RPM with outputs ranging from 1,000 - 34,000 Lb/Hr depending on screen size and material.Includes: -- Control panel.(4,926) Total operating hours.