PEERLESS - Truck & Trailer Tipper & Receiving BinComplete with the following major components & features: -- Receiving Bin with Chain Bottom Discharge. (No transport conveyor after the bin.) -- 63° Tilt, 65 - 70 Ton cap., and 65 ft. Deck length. -- Twin hydraulic cylinders on each side. -- Dual hydraulic units. -- (2) Safety Bows.NOTES: &#9679 This System seems to be in very nice condition despite being shut down for perhaps (10)years. &#9679 Used at a paper mfg. facility. &#9679 Has been dumping full trucks and trailers.

PEERLESS - MONO 21 Unit , ...Material Chip BinChip Bin main components: -- Bin with 21-Unit (4,200 cubic feet) capacity. -- Hydraulic power unit. -- Steel support structure. -- Clamshell-type material discharge doors. -- Price shown includes dismantling & loading onto trucks. -- Infeed Conveyor shown is NOT included, but is available as an optional item.

PELLET.TOWER Pellet Manufacturing System. -- Complete modular, vertically designed Pellet Manufacturing System within a 65' tall free-standing tower containing all the Pellet Manufacturing equipment necessary on a 17' x 20' concrete pad including all pellet producing material handling & conveyor systems. -- 25,000 - 30,000 Tons annual pellet capacity from wood or agricultural waste streams. -- Tower includes: (6) Levels, vertically integrated on top of each other; an operator monitoring station is located at the ground level, processing equipment is in the top (5) levels. -- Each level has direct "walk-up" service and maintenance access without personal lifts, ladders, or other access devices. -- Complete integration of electric power supply & panels, Compressed Air, Air Filters, and Dust Collection, with safety controls linked throughout the automated system. -- System designed to run and be maintained by (1) on-site operator or off-site with remote PC monitoring of the entire process. -- Each level includes high quality brand name equipment: Hammer Mill at the beginning of the process, Material Holding & Dosing Bin, as well as the Dust Collection & Air Handling system at the very top of the Tower. -- Binding Agent System, multiple Foreign Material Separators, Water Dosing with moisture control; Ripening Silo; high production Pellet Mill, Pellet Cooler, final Screening Station on levels below. -- Includes following auxiliary equipment: Process Control with full Visualization (on Monitors), Fire Protection, Explosion Prevention, Dust Collection, Spark Detection, Water Distribution, Compressed Air, and a Central Vacuum Cleaning System that makes all a clean enclosed work environment. -- The 6-levels are in a completely self-contained steel structure, enclosed with insulated sandwich panels and weatherproof cladding. -- Post-installation, in case of relocation, the Tower can be divided into (4) units for transportation on flatbed trailers; dismantling & reconstruction requires approx.(6) weeks. Pricing includes "delivery to site, installation & training". Please ask for full quote with all specifics - and geared toward your location, material, and application!

The PELLET.TOWER is a modular, vertically designed Pellet Manufacturing System providing an innovative, but proven solution to biomass pellet fuel production."Single Tower Series": -- Capacity: 2.8 - 6.6 tons/Hr (2.5 - 6.0 metric tons/Hr); -- Installed power: 415 - 750 HP (310 - 560 kW); -- Dimensioins: 17' x 20' x 69' (5 x 6 x 21 m); -- Weight: 79 - 90 tons (72 - 82 metric tons)."Dual Tower Series": -- Capacity: 6.6 - 11.0 tons/Hr (6.0 - 10.0 metric tons/Hr); -- Installed power: 945 - 1,275 HP (705 - 950 kW); -- Dimensions: 32' x 18' x 75' (10 x 5.5 x 23 m); -- Weight: 157 - 165 tons (142 - 150 metric tons)."Triple Tower Series": -- Capacity: 10 - 15 Tons/Hr. (9.0 - 13.6 metric tons/Hr); -- Installed power: 1,542 – 1,823 HP (1,150 – 1,360 kW); -- Dimensions: 67.25' x 26.9' x 75.13' (20.5 x8.2 x 22.9 m); -- Weight: 232 - 243 tons (210 -220 metric tons).System Highlights: -- Over 100.000 Hrs operating experience. -- Modular system to produce high quality pellets; -- Standardizes components; -- Compact design (small footprint); -- No building required ("single machine"); -- Semi-mobile system (relocation possible).Main Components: -- Feeding bin; -- Binding agend adding; -- Foreign material separator; -- Hammermill; -- Air/material separator; -- Conditioning bin(s); -- Pellet mill(s); -- Central lubricator; -- Pellet cooler(s); -- Pellet screen(s); -- Exhaust air filter; -- Compressed air; -- Fire/spark detection & extinguishing; -- Central vacuum cleaning system; -- PLC control & visualization.

PERDURE model P006 Wood Torrefaction Line with Propane Heating;Oven roasting type complete with the following components and features: -- (6) Meter-long treatment Chamber. -- 1.2 Million BTU propane Heater (or convert to natural gas). -- Afterburner. -- Entrance and exit Conveyor with motorized Trolleys. -- (2) Sliding Doors closed with electric Jacks, -- (2) Stirrers, -- (2) Burners, -- (1) Main Fan -- Water Circuit. -- PCI INDUSTRIES Multi-zone Climate Control System based on thermocouple temperature measurements. -- The setup is equipped with a system for heat recovery and combustion (afterburner) of volatile organic compounds (VOCs) emitted by the wood, which results in reduced energy consumption. -- Final treatment of the product load is cooling by water injection.NOTES: &#9679 The PERDURE process is distinguished by relatively short processing times (7 to 16 hours depending on the species and the thickness of the parts processed) and the low loading capacity of the ovens (approximately 3 to 8 Mbmp). &#9679 The original 2006 purchase was $ 991,000.00 in Canadian funds.

PRESTO P3-AA ROUND PNEUMATIC AIRBAG LOAD LEVELERTurntable top with easy turning anti-friction bearings allows users to spin loads so they are always working from the near side without having to walk around the unit.Specifications: -- Automatic positions loads between 9-1/2" and 27-3/4" -- Small base allows workers to stand up close to the P3 at any position -- Stable design requires no floor lagging -- Build fork pockets for easy lagging, -- Load capacity 4,000 Lbs -- Raised height 27-3/4" -- Lowered height 9-1/2" -- Overall base 36" W x 36" L -- Turntable diameter 43-5/8" -- Shipping weight 450 Lbs

RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.

RAPTOR - MINI TG, ...Tire Grinder / ShredderRAPTOR Tire Grinders are the most durable and easy to use Shredders built. Specfications: -- Feed opening: 33" x 36". -- Main motor: 200 HP. -- Size material down to: 3/4". -- Screen size: 3/4". -- Separates steel from rubber: 75% to 80%. -- Capacity: 2 Tons per hour (approx.).Equipped with: -- Full hardened knives. -- Electric control panel. -- Stand and infeed hopper.NOTE: New beearings and seals, a rebuilt gearbox, rebuilt gear reducer, and rebuilt electric motors. New frame and screen, too!

REM - CC10, ...Used Can FlattenerThe REM Can Crusher is a complete separating, crushing, and blowing unit for aluminum cans.Specifications: -- Efficiently processes: 1,800 - 2,000 Lbs per hour. -- Load cans in the hopper and the conveyor carries the cans across the magnetic head pulley separating the steel from aluminum. -- The aluminum cans are crushed between a steel pressure plate and the rotating crusher drum with hardened steel bars; the cans then drop into a high-velocity air stream and are blown into a trailer or storage container. -- Features: 16" Wide belt; Crusher with: 10 HP 240/480-Volt, 3-phase; Blower with: 7.5 HP 240/480-Volt, 3-phase.

REX MFG. 30-208/600 Auto TransformerSpecifications & Features: -- 30 KVA Auto-ventilated "dry type", 3-phase Auto Transformer; 208 Volt primary, 600 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets.Complete with: -- Coil windings with high quality copper magnet wire; -- Class 220° C insulation is utilized througout the coil winding process; -- Coil is impregnated and baked in Polyester resin varnish; substantial cooling ducts for effective cooling.Includes: -- NEMA 3R Indoor, sprinkler proof steel enclosure; -- UL & CSA approval; delivery anywhere in the Continental USA.

REX MFG. 75 KVA RC75C2-F/N 220/380 Three-Phase Auto TransformerSpecifications & Features: -- 75 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 220 Volt primary, 380 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized througout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.

REX MFG. 200 KVA RC200C-F/N 240/380 Three-Phase Auto TransformerSpecifications & Features: -- 200 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 240 Volt primary, 380 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized througout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.

REX MFG. 75 KVA RC75H1-J, 460/600 Three-Phase Auto TransformerSpecifications & Features: -- 75 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 460 Volt primary, 575/600 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized throughout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 1 rated Heavy Gauge steel enclosure w/ventilation openings. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.

REX MFG. 200 KVA RC200H-G1/50 480/400 Three-Phase Auto TransformerSpecifications & Features: -- 200 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 480 Volt primary, 400 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- Coil windings have high quality copper magnet wire; Class 220° C insulation is utilized throughout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved.

ROBUST SD 45 Vertical Low Noise Grinder; The model SD 45 is characterized by low power consumption, high productivity, and ease to use.Features: -- Universal use (diverse wood, particle boards, veneer, MDF plates, cardboard boxes, plastics, etc.); -- Completely automatic operation -- The engine start-up is controlled by the star/triangle system -- Hardened knives with four cutting edges with an extended service life -- The crushing unit without any mechanical obstacles that could cause stopping -- The HARDOX sieve -- Simple installation, plug-in and start-up -- Economic use of energy -- Extremely quiet operation -- Simple and minimum maintenanceTechnical Specifications: -- Motor: 20 HP (15 kW) -- Rotor diameter: 150 mm -- Rotor speed 140 RPM 140 -- Number of knives: ) 17 (15 + 2) -- Top opening 640 mm x 430 mm ( 25.2" X 17") -- Dust extraction size 152 mm diameter -- Weight 950 Kg (2090 Lbs) -- Screen with holes available from 10 to 50 mm (comes standard with 12 mm screen) -- Production capacity: Approx. 0,5 - 1,5 Cubic meters per minute

ROBUST SD 60E Low Noise Vertical GrinderFeatures: -- One-piece machined cutterhead without welding for increased accuracy in knife fastening. -- The inserts can be used on their four (4) sides, which reduces operating and tooling costs. -- Overload protection. -- Several dimensions of HARDOX Screen available according to your requisitions.Technical Specifications: -- Motor (18.5KW) - 25CV/600V/60C/3Ph -- Top opening 946 mm x 567 mm (37" X 22.3") -- Cutterhead diameter 222 mm -- Cutterhead speed 80 à 120 RPM -- Quantity of TCT tips 14 ( + 2 latéral) -- Productiion capacity 3 à 4 m3/hour The capacity varies according to the dimensions of the grill, the type of wood and its humidity rate . -- Rear screen dimensions of holes 10 à 30 mm -- Dust hood 160 mm -- Machine dimensions 1881(L) x 1115(W) x 1670(H) (70" X 44" X 65.7")

ROBUST SD 70 Low Noise Vertical Wood Waste GrinderBasic machine features: -- BOVER_BASIC intelligent control system -- Power set (electric motor, reduction gear, and belt transmission) -- Vertical hopper -- Hydraulic pressure unit -- Robust and adjustable -- Hardened knives with four cutting edges with an extended service life -- Hardened cleaning knives -- Hardened cutting racks -- HARDOX sieve -- The motor start-up is controlled by the star/triangle systemTechnical Specifications: -- Main motor 30 kW (40 HP) -- Top Opening: 1445 mm × 1345mm ( 56.8" X 53") -- Rotor working length: 650 mm -- Rotor diameter: 270 mm -- Number of knives: 28 -- Screen hole diameter 10 - 50 mm -- Production capacity: 3 - 5 Cubic meter -- Weight : 1,750 Kg (3,850 Lbs) -- OAL 1973 mm X 1548 mm (77.6" X 61")

RONNING ENGINEERING Single Pass 10.5' X 40' Dryer/Cooling Drum;Complete with the following components: -- Like new condition, used approximately 1000 hours. -- Trunnion bases with Wheels & Drum Guide Idler. -- Gearbox/base (no motor). -- Insulation -- Endplates. -- This is a hi-performance design with full panel flighting originally set up as a cooling drum. The heat exchange surface is greatly increased with the addition of the panel flighting for which other standard single pass coolers/dryers would need to be much larger to compete with. -- Originally, this was set up has a cooling drum, but by simply reversing the air flow would make it an equally hi performance single pass dryer.

SAS SCORPION ENGINE PULLER Model SC40 DescriptionIncrease cash recovery from your recycling operationsSAS Forks Scorpion High Speed Motor Puller – Scrap Yard Engine Puller – Auto Recycling Engine Puller – Excellent for self service yards processing vehicles before crushing.Generate revenue:Process end of life vehicles in less than 60 seconds.Pull scrap engines and transmissions in 30 seconds.30% more revenue by separating metals from bodies.1000% more revenue per lb. on wire harness from engine compartment and dash.80% more visibility with a direct line of site from the operator’s window through the forks.Cycle time less than 15 seconds from park to full extension.Serviceable for long life. Replace blades in 3 hours or less.estimated only.Engineered & built for optimum performance:Engineered tough for continuous prying and durability.Hardened pins and bushings and grease-able pivot points for extended service life.Hydraulic hoses and cylinders are protected to minimize potential damage from sharp objects.Built with high strength blades and carriage skid plates for extended service.Clean up of ground debris is a snap with center plow blade.Speed is paramount in this design. Operator uses grapple from the cab, no torches, no personnel needed to hook up chains to pull or move engines. Safer, quicker and less costly removal of engines and transmissions.

Saturn Model 36x20 Slow-Speed Shredder --36" long x 20" wide chamber opening --1/2" knives. -- KYB MRH-30-SW2 hydraulic system powered by a 50-hp three-phase electric motor. --Comes equipped with stand and controls. -- Excellent for plastic, E-scrap, rubber, small tires, paper, cardboard, light metals.