EXTREMA DC-240.1 TYPHOON Fabric Filtration Dust Collection System. -- Powerful, portable, and affordable dust collector with roll around casters mounted to a steel platform base. -- (2) Oversized Fabric filter top bags, approx. 75 sq. ft.filter area, are placed above plastic collection bags, approx. 18.85 cu. ft. storage capacity. -- 3,950 CFM Output with single-stage blower. -- 5 HP Induction motor. -- Filter bags filter dust particles down to (5) Micron in size. -- Main inlet 10" or dual 4" adapter.

EXTREMA DCF-327 Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- For indoor use. (Enclosed outdoor unit available). -- Excellent addition to the "DCY Typhoon" Dust Collector

EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".

EXTREMA - DCY-1220 L3 TYPHOON: Cyclone Filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a Rotary Air Lock, allowing you to choose the disposal system before passing finer particles through the fan and filter. -- Air volume rated @ 8,800 CFM. -- Unit includes: 20 HP Motor with a Soft Start already wired in. -- Rotary air lock with: 1 HP Motor @ 38 CFM. -- Low noise operation. -- Standard support frame: LEG 3; 164" clear height x 149" clear width x 91" clear depth. Includes after filter Baghouse DC-327E. Features: 16" Inlet; (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) micron filter. -- Unit is enclosed.

EXTREMA XF-DC4 Power Feeder w/Mounting ColumnExtrema has a wide range of power feeders that range from compact junior feeders to large 5-roller feeders. The XF-DC4 Series features a 4-roller system with variable speeds. Includes the 2/3 HP DC brushless servo motor for higher torque and better variable speed control than a 1HP AC motor.Specification: -- "EXTREMELY" Heavy duty 4-Roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 2/3 HP Motor with forward/reversing switch. -- Variable speed from 7-72 FPM -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Flotation of rollers for material thickness variations. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available)

"EXTREMA XF-54T.1 Power Feeder w/Mounting Column;EXTREMELY" Heavy duty 5-roller continuous belt Power Feeder with (3) 44.5" x 1/2" tracks. -- 1 HP Motor with forward/reversing switch. -- (4) Speeds of 15 - 28 - 39 & 78 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Floatation of the rollers. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available)

EXTREMA XF-34.1 Power Feeder w/Mounting Column;EXTREMELY" Heavy duty built 3-Roll Power Feeder with 4-3/4" dia. and 2-1/4" wide rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (4) Speeds of 13 - 26 - 36 & 72 FPM. -- Solid cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Floatation of the rollers. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available).

"EXTREMA XF-34.3 Power Feeder w/Mounting Column;EXTREMELY" Heavy duty 3-Roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (4) Speeds of 13 - 26 - 36 & 72 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Floation of the rollers. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available)

EXTREMA XF-38.1 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 3-roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (8) Speeds of 7 - 13 - 18 - 22 - 26 - 36 - 43 - 55 & 108 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Floation of the rollers. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available)

EXTREMA XF-38.3 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 3-Roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (8) Speeds of 7 - 13 - 18 - 22 - 26 - 36 - 43 - 55 & 108 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Floation of rollers for material thickness variations. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available)

EXTREMA XF-3J Power Feeder w/Mounting Column;3-Roll Power Feeder with (3) rubber feed rollers. -- 0.25 HP Single phase motor. -- (4) Speeds of 20 - 26 - 33 & 43. -- Cast aluminum construction of the feeder housing. -- Heavy cast iron Universal Stand components. -- 1/2" Flotation of the rollers. -- Fully adjustable Mounting Column w/locking joints.

EXTREMA XF-44.1 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 4-roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (4) Speeds of 13 - 26 - 36 & 72 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Flotation of the rollers. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available)

EXTREMA XF-44.3 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 4-Roll Power Feeder with 4-3/4" diameter x 2-1/4" wide rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (4) Speeds of 13 - 26 - 36 & 72 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Flotation of the rollers. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available).

EXTREMA XF-54T.3 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 5-roller CONTINUOUS BELT Power Feeder with (3) 44.5" x 1/2" tracks. -- 1 HP Motor with forward/reversing switch. -- (4) Speeds of 15 - 28 - 39 & 78 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast iron stand components with fully adjustable mounting column. -- 3/4" Floatation travel of the rollers. -- Standard reach from base is 720 mm / 28-3/8" (optional 850 mm / 33-7/16" arm available)

EXTREMA - DCY-1425 L3 TYPHOON: Cyclone Filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a Rotary Air Lock, allowing you to choose the disposal system before passing finer particles through the fan & filter. -- Free air volume: Rated @ 10,500 CFM. Low noise operation. Equipped with: -- 25 HP Motor with a Soft Start already wired in. -- Rotary air lock with: 1 HP Motor @ 38 CFM. -- Standard support frame: LEG 3 164" clear height x 149" clear width x 91" clear depth. -- (2) DCF-327E Exterior baghouses for more than enough filtering capacity.

Extrema XG12 Gang Rip SawSpecifications -- 12" long arbor for 11-3/4" max. cutting width and powered -- 50 HP main motor; --10" to 16" dia. blade running at 3,200 RPM and with cutting depth from 1/8" to 5-1/8". -- Min. working length is 9-1/8".Equipped with & Features -- 3 HP feed motor for variable speed feed 30 to 130 FPM. -- Feed system provides power to Heat treated chain for positive feeding; automatic lubrication of chain and race; low oil shutdown; -- (6) individually spring loaded top rollers; table is 15" wide x 109" long. -- .25 HP motor for power raise and lower of top feed rolls. -- Disc arbor brakes, cardan shaft driven system, and interchangeable blade sleeves including sleeve changing rack. -- Swivel control panel and Square D electrical controls, solid cast-iron construction. -- Soft start, -- Triple anti-kickback fingers, and replaceable pressure plate. -- (4) Overhead LasersNote from the seller: Gang Rip Saw comes from a small 3 man shop.

EZ CAR - (Used) Model A: Car Crusher Approx: 6,200 hours.New in: 1988.System Pressure: 2,500 PSI.Port Reliefs set at: 2,650 PSI.Cylinders: 10" Bore.Travel: 78".Shaft: 4" rod.OpeningSize: 20" x 8'-1" x 7'-7".OverallWeight: 61,000 Lbs.Length: 43'-1/4."Travel & operating height: 13'-1/4'.

MEREEN-JOHNSON Model "424-DC/SR ( 1 ) Moving Blade Gang Rip SawSpecifications -- 24" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max., -- 22" min. length, 6" throat. -- "Select-A-Rip" multiple Rip Saw with rapid adjustment of (1) moveable saw blade (shifts at approx. 3" per second); can be used independently or in conjunction with a gang sleeve arrangement; provides straight line gang ripping while maintaining optimum yield and delivering glue-joint accuracy.Equipped with & Features -- Select-A-Rip includes a control console and overhead laser lights for accurate blade positioning. -- 75 HP - 3,600 RPM TEFC Direct drive motor. -- Feed & chain: 3 HP Variable feed speed from 50 - 150 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, -- Extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, -- Automatic chain oiler with low level shutoff. --: (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, -- Eight ( 8 ) adjustment with scale & pointer reference; -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- (2) Upper dust hoods, (1) 10" & (1) 5" dia., requires 3,820 CFM. -Note From The Seller Machine was used in a low production environment and has low hours.

MEREEN-JOHNSON 419-DC Gang Rip Saw --Specifications -- 19" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max. manual thickness adjustment, -- 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. --Equipped with & Features -- 75 HP - 3,600 RPM drive motor with direct drive to arbor. -- Feed & chain: 3 HP Variable feed speed 30 to 150 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, and chain oiler. -- (4) 3" Dia. spring loaded overhead pressure rolls (with new springs); full width spring loaded overhead bed plate, pressure rolls and bed plate unit with scale & pointer thickness reference; anti-kickback finger system , -- (1) lower & (2) upper on infeed (kickback fingers are newly replaced). -- (2) Upper dust hoods (1) 10" & (1) 5" dia., and (1) lower 4" dia. hood; requires 3,820 CFM; (2) 19" saw sleeve with mics. spacers. -- New Laser Light Array complete with (5) Lasers and Mounting Hardware, --. Spare parts including extra saw sleeve, short stock holddown plates, a few sawblades, etc. -- Notice the feed chain - it's in exceptional condition! --Note From The Seller Arbor motor burnt out, needs repair

Complete MEREEN-JOHNSON/CHOICE MACHINERY GROUP 431-DC-1/C1210 - C1260 Gang Rip Saw LineOverall Specifications: -- Panel width 24" - 27". -- Panel length 36" - 109". -- Panel thickness 1/2" - 1-1/8".Consisting of the following machines as late as 2022: -- 2022 CHOICE MACHINERY GROUP C1210 7-1/2’ W x 7’ L x 18-1/2"; H 5-Chain Transfer Deck Conveyor, S/N 1048, with Distance between chains (Left-to-right) 22";, 22";, 21"; - 24";, 16"; - 19";, 1/2 HP - 1,720 RPM TEFC Motor, & (2) 6"; W x 55"; H Back stops. -- 2022 CHOICE MACHINERY GROUP C1220 31" Capacity Automatic Unstacker/Panel Feeder, S/N 1049, with Unstacker platform with Raised height 52" & Lowered height 18", (4) 125"; L x 3-3/4"; Dia. Motorized rollers on 9-1/2" Centers, Safety light curtain, & 5 HP Hydraulic unit, and Automatic panel feeder with Chain-driven pusher & 3/4 HP - 1,710 RPM TEFC Motor. -- MEREEN-JOHNSON 431-DC-1 Dip Chain Gang Rip Saw, S/N MJ-6837 (Approximately 2003), with 7,564 Hrs., Arbor cap. 31", Max. blade dia. 14", Max. thickness 3-1/2", Min. length: 29" for Glue joint accuracy & 22" for Busting, Throat 6", Variable feed speeds 30 - 170 FPM, with 75 HP - 3,600 RPM TEFC Direct drive arbor motor with Disc brake, Load meter & Arbor lockout for access door; "POSI-FEED" Dip bed with 5" Pitch Hardened double-V chain, "QUAD LIFE" Hardened dip cams, 2-3/8" x 14"; Extruded structural aluminum feed bed slats with 1-3/4"; Replaceable steel-backed rubber insert strips, Automatic chain lubrication with Low-level shutoff, & 5 HP Feed motor with Adjustable jam protection; (4) 3" Dia. Air-loaded overhead pressure rolls, Full width spring-loaded overhead bed plate, Motorized thickness adjustment, Anti-kickback finger system with (1) Lower & (2) Upper on infeed & (1) Upper on outfeed, Complete with Spare arbor with (11) Blades. -- 2022 CHOICE MACHINERY GROUP C1230 Motorized Belt Conveyor, S/N 1050, with 3/4 HP - 1,710 RPM TEFC Motor. -- 2022 CHOICE MACHINERY GROUP C1240 Dual Reel Automatic Strapper/Stacker, S/N 1051, with SOUTHWORTH 4,000 Lb. Cap. Electric/hydraulic scissor lift platform with 3.3 HP Hydraulic unit, & Safety light curtain. -- 2022 CHOICE MACHINERY GROUP C1250 Tilt Unit, S/N 1052, with 5 HP Hydraulic unit & Motorized rollers with 1/2 HP - 1,720 RPM TEFC Motor. -- 2022 CHOICE MACHINERY GROUP C1260 Motorized Roller Conveyor, S/N 1053, with End stop. -- 2022 CHOICE MACHINERY GROUP C12XX Control Console, with S/N 1054, with SCHNEIDER "MAGELIS" Touchscreen control, Operating manual, & Steel bar grating operator platform.VIDEO NOTE: The original operator was not available to run this line, so it was run in manual mode, which is considerably slower than automatic mode. As a result, the video playback speed has been doubled for the convenience of viewing.