TORIT 360-IRD-15 Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Down flow air pattern allows airflow and gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure dropSpecifications: -- 15 HP direct drive, floor mounted blower. -- 4,800 CFM @ 8" wg, 4,050 CFM @ 9" wg, 2,400 CFM @ 10" wg -- (21) Dura-life filter bags with a cloth area of 192 sq. ft. -- (3) Collection points for plastic collection bags.

DONALDSON-TORIT - 376RFW-10 or 12 , ...Dust Collector: 45,000 CFM @ 9.7:1 Air-to-cloth ratio; 140" dia. round baghouse with: (376) filter bags of 10' length (oval bags provide for radial movement of bag during cleaning for longer life), total 4,632 sq. ft. filter area. -- Filtration media cleaning via a floor-mounted 7.5 HP medium pressure air pump (eliminates the need for compressed air which can be susceptible to condensation and freezing); 36" x 65" return air outlet and 48" x 48" inlet for dust laden air. -- Includes: Rotating cleaning air manifold driven by 0.33 HP motor; (1) NEMA-9 solenoid and diaphragm valve which rotates over the bag openings; walk-in plenum for bag access/maintenance. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed; walk-in access door at top of ladder. -- Equipped with: Structural steel support; maintenance platform; caged ladder; bolt-on involute arm; explosion doors (need to be replaced). -- Includes Backward inclined FAN EQUIPMENT: Size 7 BCS floor-mounted Fan set at 45,000 CFM @ 15" SP belt driven at 1,485 RPM; powered by a 200 HP TEFC Motor via OMRON/IDM E7 Series Inverter. -- 24" Rotary Air Lock at the bottom of the 60° hopper. -- Complete with: Pictured electrical controls are included. -- Note new 200 HP electrical motor was replaced recently. --. Unit had an accidental fire at bottom section near hopper causing the explosion doors to burst. Unit still working as they are not returning the air. Can be sold with of without replacement of doors. Cost of which is negotiable. -- Professional dismantling and rigging available at extra cost. Please call!

TORIT - CHECKER BOARD, ...Control PanelTORIT Checkerboard Control Panel for a DFT3-18 Dust Collector with up to a 25 HP BlowerIncludes: -- Start/Stop push control buttons for Dust Collection System. -- Electric disconnect to shutdown power if needed. -- HEPA Filter pressure gauge. -- Alarm with light when dust filters need to be cleaned. -- Pressure gauge showing the air flow in the system. -- Air pressure pulse cleaning controls to clean dust from filters. -- Control box mounted on legs.

DONALDSON TORIT - 232 RF-8, ...24,000 CFM Baghouse Dust Collector (refurbished 2017) with: Rotary Air Lock & AIRCOM 32" Dia. Explosion Isolation Flap Valve (New 2017) -- Specifications. Approx. 10-1/2' Dia. x 24' H Baghouse with: 7-1/2' H Cone bottom & (232) 8' L cloth filter bags totaling appx. 2,414 sq./ft. of cloth area.Air-to-cloth ratio: 9.94:1; Overall system footprint: 25' x 25'. -- AIRCOM - SNR 800. ...32" Dia. SNR (Safety Not Return) Explosion Isolation Flap Valve: S/N 0977003 (2017); certified ATEX EN 15089; Class 2, NFPA Compliant with: Max. air speed 30 m/s; max. dust concentration: 4 LEL; Kst max. 299 bar m/s; pred. max. 0.25 bar, Pmax. 9 bar; Pipe structure to withstand pressure: 0.25 bar; Explosion resistance of flap 850 mbar;, Min. ignition energy 3 - 10 mJ; Min. ignition temperature 420° C (788° F); Temperature range: –20° C to +60° C (-4° f to 140° F); Range of applicable volumes: 10 - 60 cu. meters (33 - 196 cu./ft.); Anti-opening locks on both flaps. -- 75 HP - 1,780 RPM, TEFC Motor Driving Blower: Rated at 24,000 CFM @12" SP with: 36" Dia. inlet & 30" x 36" outlet. -- KOGER - SIZE 12, ...Rotary Air Lock with: 12" Dia. inlet & outlet 1 HP Motor. -- MURPHY-RODGERS - MRT-12, 10 HP Blower: S/N 1272 with 12" dia. inlet & 8" x 11" outlet. -- ROOTS - 32 U-RAI, ...5 HP Lobe Blower: S/N 0802963165. -- Electrical controls included. -- Actual model is: "232FRW8" (Walk-in unit); estimated shipping weight: 15,500 Lbs. -- Available 1st wk in July or sooner if needed.

TORIT/DAY 156RFW10 Dust Collector with Rotary Air Lock and Non-Return Valve & Fire Prevention.20,300 CFM at 10:1 Air-to-cloth ratio, (156) filter bags 10' long providing a total 2030 sq. ft. of filter area; filtration media cleaning via 3 HP medium pressure air pump eliminating the need for compressed air which can be susceptible to condensation and freezing. -- Rotating cleaning air manifold driven by 0.33 HP motor, uses only (1) Nema-9 solenoid and diaphragm valve which rotates over the bag openings; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Clean air side fan assembly with 24ACF CLASS I-III fan driven by a 40 HP TEFC motor; TORIT "16 AN" 16" rotary air lock at the bottom of 60° hopper. -- Features: (2022) AIRCOM/BOSS PRODUCTS. NRVC Non Return Valve Combo. Extinguishing Box. GM SYSTEMS GMCU161SD-FM Fire Prevention Control Unit which manages 5 independent lines (16 program inputs & 5+10 outputs) - FM Certified. RAPTOR SERIES with related RAPTOR SPARK RS-BOX02. -- Complete with: Walk-in plenum, maintenance platform, caged ladder & support structure, electrical control panel. -- Includes: Outdoor piping & pictured waste bin. -- Please inquire for dismantling & rigging quotations

TORIT - 460-IRD-20: Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Downflow air pattern allows airflow & gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure drop.Specifications -- 20 HP Direct drive; floor mounted blower. -- Fan inlet: 17". -- CFM: 7,000. -- Set of filter bags. -- Steel elbow from fan to collector. Motor Starter included.