EX-FACTORY INC.
EX-FACTORY INC.
 704-841-2001

Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!

Filtering

Reset All 

thru
 Used     New
Viewing Page 8 of 24
475 Results Found
Sort By 
EX-FACTORY-INC
 704-841-2001
2026 Steff 2044/3  Conveyor General
$1,375

STEFF 2044-3 Power Feeder. -- (4) 4-3/4" Dia. and 2-1/4" wide rubber feed rollers with 60-shore hardness. -- 1 HP - 2-Speed motor with forward-and-reverse. -- (4) Speeds (motor & gear) of 13 - 26 - 36 & 72 FPM. -- Feeder head rotates to any position up to a full 180°range. -- 28" Standard reach of head from base. -- Hardened steel drive gears. -- Electrostatic powder coated finish on all cast parts. -- Easy access external lubrication points for each roller shaft. -- Fully adjustable mounting column with locking joints. -- Options: Longer reach (34" & 38") from base to head;

 704-841-2001

 Call
2026 Steff 2048/3  Conveyor General
$1,595

STEFF 2048/3 Power Feeder (4) 4-3/4" Dia. and 2-1/4" rubber feed rollers with 60-shore hardness. -- 2-Speed - 1 HP motor with forward-and-reverse. -- (8) Feed speeds of 6 - 13 - 16 - 21 - 36 - 42 - 54 and 102 FPM. -- Feeder head movement in any position up to a full 180° range. -- 20" Standard reach of head from base. -- Hardened steel drive gears. -- Electrostatic powder coated finish on all cast parts. -- Easy access external lubrication points for each roller shaft. -- Fully adjustable mounting column w/locking joints. -- Options: Longer reach (34" & 38") from base to head;

 704-841-2001

 Call
1990 Sullair 10B-50 ACAC  Air Compressor
$4,460

SULLAIR 10B-50 ACAC Rotary Screw Compressor (Open Type)Specifications: -- 50 HP - 1,770 RPM Motor, rotary screw air end, 100-110 max. PSI, approx. 180 ACFM; (2) asymmetrical lobe profile rotors only make contact on a lubricated pitchline to virtually eliminate cap. or efficiency loss. -- Equipped with: -- Tapered roller bearings on discharge and cylindrical bearings on inlet for high load carrying capacity. -- Pressurized fluid lubrication & cooling of Compressor with rigid piping & tubing; efficient 2-stage air/oil separation with replaceable element. -- Spin-on fiberglass fluid filter, Heavy Duty inlet air filter, cap. modulator stabilizes system pressure and matches output to demand (minimizes need for air receiver & reduces wear caused by start/stop). -- Includes: -- Electro-mechanical gauges & controls, air after-cooling.

 704-841-2001

 Call
Torit 376 RFW-10  Dust Collection System
Call for Price

DONALDSON-TORIT - 376RFW-10 or 12: Dust Collector45,000 CFM @ 9.7:1 Air-to-cloth ratio; 140" dia. round baghouse with: (376) Filter bags of 10' length (oval bags provide for radial movement of bag during cleaning for longer life); total 4,632 sq./ft. filter area. -- Filtration media cleaning via: Floor mounted 7-1/2 HP medium pressure Air Pump (eliminates the need for compressed air; can be susceptible to condensation & freezing); 36" x 65" return air outlet; 48" x 48" inlet for dust laden air. -- Includes: Rotating cleaning air manifold driven by 1/3 HP motor; (1) NEMA-9 solenoid & diaphragm valve, which rotates over the bag openings; walk-in plenum for bag access/maintenance. -- Galvanized steel bag frames with: Positive bag bolt down to eliminate leakage; ride up of bags once installed; walk-in access door at top of ladder. -- Equipped with: Structural steel support; maintenance platform; caged ladder; bolt-on involute arm; explosion doors (need to be replaced). -- Includes. Backward inclined FAN EQUIPMENT: Size 7 BCS floor-mounted Fan set at 45,000 CFM @ 15" SP; belt driven at 1,485 RPM; powered by a 200 HP TEFC Motor via OMRON/IDM E7 Series Inverter. -- 24" Rotary Air Lock at the bottom of the 60° hopper. -- Complete with: Pictured electrical controls are included. -- NOTE: New 200 HP electrical motor was replaced recently. -- Unit had an accidental fire at bottom section near Hopper causing the explosion doors to burst. Unit still working as they are not returning the air. Can be sold with or without replacement of doors; cost of which is negotiable. -- Professional dismantling and rigging available at extra cost. Please call!

 704-841-2001

 Call
2007 Torit 484 RFW-10  Dust Collection System
Call for Price

DONALDSON-TORIT - 484RFW10. Filter Unit with: Rotary Airlock & Transfer Blower. -- Approx. 60,000 CFM @ 9.5:1 Air-to-cloth ratio; 158" dia. round baghouse with: (484) Cloth filter bags of 10' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life); 6,297 sq./ft. of filter. -- Supplied with: IAP - 542-B Blower. Includes: 200 HP TEFC motor; installed & rated for: 61,000 CFM @ 15"SP, BHP 188 @ 1,142 RPM. Pipe at fan inlet is about 57" dia. -- Controls Include: SAFTRONICS Soft Start. -- Complete with CHICAGO Blower Transfer fan: Blows discharge for bottom of Rotary Airlock to a storage bin. -- Designed for: Filtration media; cleaning via: 7-1/2 HP on board pump (ground mounted) for: Reverse air cleaning.Return air outlet & 48" x 48" inlet for dust-laden air. -- Rotating cleaning air manifold driven by: 0.33 HP Motor; (1) NEMA 9: Solenoid & diaphragm valve; control pulse jets of air to: Clean each row of bags; galvanized steel bag frames with: Positive bag bolt down to: Eliminate leakage & ride up of bags once installed; walk-in access door on platform at top. -- (4) Explosion Doors. Lot of pipes; interior & exterior pipe from filter to fan; fan discharge fitting.

 704-841-2001

 Call
Torit ADMC  Dust Collection System
Call for Price

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.

 704-841-2001

 Call
2000 Torit CHECKER BOARD  Dust Collection System
$1,310

TORIT - CHECKER BOARD: Control PanelTORIT Checkerboard Control Panel for a "DFT3-18" Dust Collector up to a 25 HP Blower.Includes -- Start/Stop push control buttons for Dust Collection System. -- Electric disconnect to shutdown power if needed. -- HEPA Filter pressure gauge. -- Alarm with light when dust filters require cleaning. -- Pressure gauge showing the air flow in the system. -- Air pressure pulse cleaning controls to clean dust from filters. -- Control box mounted on legs.

 704-841-2001

 Call
Toyota 42-6FGCU25  Forklift
$15,625

Toyota 42-6FGCU25 Fork LiftReliable Toyota propane forklift available for immediate sale. The machine was utilized in a cabinet and millwork manufacturing facility and is well suited for warehouse, commercial, and industrial operations. The forklift starts, drives, lifts, and operates properly. Toyota forklifts are known for their durability, ease of maintenance, and strong resale value within the industry. -- 5,000 Lbs Cap., 2.2L 4-Cylinder engine, Load Center 24", Triple-stage mast, 189" raised height, 13,332 Hours -- Includes; automatic transmission, side shifter with 42" forks, LP gas and cushion tires. Approx.. weight 8,800 Lbs

 704-841-2001

 Call
2026 Cam-Wood BX-1212-HR-TNX  Resaw-Band
$67,500

CAM-WOOD BX-1212-HR-TNX Two-Head Band Resaw Can be used to cut boards, cants, or reclaim slabs; max. working height up to 12" H under pressure roller x 12" W; 1/4" - 10-5/8" between blade and conveyor; VFD controlled variable speed from 0 - 90 FPM.Equipped with: -- 20 HP Saw Motor, 28" x 2" dynamically balanced cast iron band wheels, 201" x 2" - 3" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Automatic moisture cooling system for cooling and lubricating the saw blade for cleaning the blade tooth and longer blade life; -- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change. Complete with: -- 3 HP Drive motor; variable feed speed 0 - 90 FPM; digital controller for convenient and accurate thickness setting; -- 1/2 HP Blade elevation motor; infeed and outfeed spring-loaded pressure rolls, easily adjusted by a gear rack.Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

 704-841-2001

 Call
2026 Cam-Wood BX-1212BEEX  Resaw-Band
$14,990

CAM-WOOD BX-1212BEEX Single Bottom Head Band Resaw.Can be used to cut boards, cants, or reclaim slabs; Specifications: -- Can process up to 12" H x 12" W; 5/16" - 5-1/4" from blade to conveyor. -- 2 HP Electric motor controlled variable speed from 12 - 80 FPM. -- This Model BX-1212BEE is equipped with: -- 20 HP Saw Motor, 28" x 1" band wheels, 168" x 1" band saw blade (not included). Features: -- Hand-wheel blade tensioning; manual elevation adjustment; 2 HP hydraulic system pump motor. Complete with: -- Spring-loaded steel and rubber upper-pressure rolls; 11" X 215" conveyor belt.

 704-841-2001

 Call
2026 Cam-Wood BX-1212HR-1X  Resaw-Band
$31,500

CAM-WOOD BX-1212HR-1 Single-Head Band Resaw w/30° Bevel CuttingCan be used to cut boards, cants, or reclaim slabs; Specifications: -- Max. working height up to 12" H under pressure roller x 12" W; 1/4" - 10-5/8" between blade and conveyor; -- VFD controlled variable speed from 0 - 60 FPM. Equipped with: -- 20 HP Saw Motor, 24" x 2" dynamically balanced cast iron band wheels, 184" x 1" to 1-1/2" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Tilting 10-5/8" x 165-1/2" infeed conveyor from 0° - 30° with side support for bevel cutting; 3 HP drive motor; variable feed speed 0 - 60 FPM; return gravity roller conveyor.Complete with: -- Programmable Digital Controller for convenient and accurate thickness setting; -- 1/4 HP Blade elevation motor moves blade and saw head; infeed and outfeed spring-loaded pressure rolls, easily adjusted by gear rack. Includes: Operators' & Parts Manual and covered by (1) Year Warranty.

 704-841-2001

 Call
2026 Cam-Wood BX-1616-HR-TNX  Resaw-Band
$71,500

CAM-WOOD BX-1616HR-TN Two-Head Band Resaw Can be used to cut boards, cants, or reclaim slabs; max. working height up to 16" H under pressure roller x 16" W; 1/4" - 12" between blade and conveyor; VFD controlled variable speed from 0 - 90 FPM.Equipped with: -- 30 HP Saw Motor (each head), 28" x 2" dynamically balanced cast iron band wheels, 201" x 2" - 3" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Automatic moisture cooling system for cooling and lubricating the saw blade for cleaning the blade tooth and longer blade life; Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change. Complete with: -- 3 HP Drive motor; variable feed speed 0 - 90 FPM; digital controller for convenient and accurate thickness setting; 1/2 HP blade elevation motor; infeed and outfeed spring-loaded pressure rolls, easily adjusted by gear rack.Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

 704-841-2001

 Call
2026 Cam-Wood BX-2410HRX  Resaw-Band
$39,890

CAM-WOOD BX-2410HR Single-Head Band Resaw w/30° Bevel CuttingCan be used to cut boards, cants, or reclaim slabs; max. working height up to 10" H under pressure roller x 24" W; 5/32" - 10" between blade and conveyor; VFD controlled variable speed from 0 - 82 FPM.Equipped with: -- 30 HP Saw Motor, 28" x 2" dynamically balanced cast iron band wheels, 195-1/2" x 2-1/8" x 3/64" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Tilting 23" x 215" infeed conveyor from 0° - 30° with side support for bevel cutting; hydraulic infeed and outfeed conveyor drive motor; variable feed speed 0 - 82 FPM; return gravity roller conveyor. -- Complete with: -- Digital controller for convenient and accurate thickness setting; 1/4 HP blade elevation motor; infeed and outfeed spring-loaded pressure rolls, easily adjusted by gear rack. -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

 704-841-2001

 Call
2026 Cam-Wood AC-100120X  Air Compressor
$6,790

CAM-WOOD AC-100120 Piston Air CompressorHeavy Duty unit with a 10 HP induction motor.Features & Specifications: -- 34.2 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 120-Gal. horizontal tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.

 704-841-2001

 Call
2026 Cam-Wood AC-5080X  Air Compressor
$3,990

CAM-WOOD AC-5080X Piston Air CompressorCompact unit with a 5 HP induction motor.Features & Specifications: -- 18 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.

 704-841-2001

 Call
2026 Cam-Wood DC-07 STA  Dust Collection System
Call for Price

CAM-WOOD DC-07 STA Cyclone Dust Collector w/ After-filtersNew designed two-stage cyclones. As the “dirty"; air stream enters the collector, the heavy particles are separated by cyclonic action and fall to the bottom storage bag. The remaining air stream with fine dust goes through the impeller, it can increase dramatically the life of the impeller & motor preventing damage from large material.Features: -- 7.5 HP blower with 4,200 CFM. -- Inlet Diameter 12" x 4" x 5. -- Heavy sheet metal frame and base. -- Extra-large radial-fin type steel impeller for high-efficiency airflow. -- Heavy duty totally enclosed industrial motor for maximum air suction and extended service life. -- Quick-release clamps are used to tighten the bags; this helps to reduce downtime when doing maintenance. -- Low sound levels to keep the working area quiet. -- Includes: (2) Collection drums

 704-841-2001

 Call
2026 Cam-Wood DC-10 STA  Dust Collection System
Call for Price

CAM-WOOD DC-10 STAX Cyclone Dust Collector w/ After-filtersNew designed two-stage cyclones. As the “dirty"; air stream enters the collector, the heavy particles are separated by cyclonic action and fall to the bottom storage bag. Then the remaining air stream with fine dust goes through the impeller, it can increase dramatically the life of the impeller & motor preventing damage from large material.Features: -- 10 HP blower with 5,000 CFM. -- Inlet Diameter 13" x 4" x 5. -- Heavy sheet metal frame and base. -- Extra-large radial-fin type steel impeller for high-efficiency airflow. -- Heavy duty totally enclosed industrial motor for maximum air suction and extended service life. -- Quick-release clamps are used to tighten the bags; this helps to reduce downtime when doing maintenance. -- Low sound levels to keep the working area quiet. -- Includes: (2) Collection drums

 704-841-2001

 Call
2026 Cam-Wood DC-102-3  Dust Collection System
$1,260

CAM-WOOD DC-102-3X Dust CollectorSmall radial-finned Dust Collector mounted on wheels for portability.Features & Specifications: -- Large 13-1/2" fan that produces 2,100 CFM. -- Heavy Duty 3 HP motor pre-wired at 460 Volts. -- Large capacity dual station cloth top bags of 31.2 sq. ft. total cloth filter area. -- Low sound level of 75 - 90 dB.

 704-841-2001

 Call
2026 Cam-Wood DC-102X  Dust Collection System
$1,340

CAM-WOOD DC-102 Dust CollectorSmall radial-finned Dust Collector mounted on wheels for portability.Features & Specifications: -- Large 13-1/2" fan that produces 2,100 CFM. -- Heavy Duty 3 HP motor pre-wired at 230 Volts. -- Large capacity dual station cloth top bags of 31.2 sq. ft. total cloth filter area. -- Low sound level of 75 - 90 dB.

 704-841-2001

 Call
2026 Cam-Wood BR-25KNURX  Post and Pole Peeler
$8,200

CAM-WOOD BR-25KNUR End Knurling/Tapping MachineThe BR-2KNUR machine is designed for knurling or threading operations on the turned end to achieve secure jointing effect.Features: --The machine is a high production, automatic unit and is pneumatically operated with air clamp by a foot switch for convenient operation. --The machine is supplied with one knurling cutterhead as standard. -- Further sizes of knurling cuttinghead are optionally available.Specifications: -- Horizontal Motor: 1 HP. -- Drill Speed: 3,450 RPM. -- Cutter Heads: Custom made. -- Spindle Stroke (Max.) 5" -- Table size 12" X 10". -- Air Clamp (1). -- Standard Head (1); Additional sizes $ 658.00 -- Net Weight 256 Lbs

 704-841-2001

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved