NEDERMAN S-750 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderIncludes: -- Auto Bag ShakerAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump BinAvailable spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEW YORK BLOWER Fan - 304AF-40: Centrifugal Blower/Motor; approx. 21,000 CFM @ 30"; SP NEW YORK BLOWER. -- Complete with: 200 HP direct drive motor; 3,565 RPM; 460 Volt; "444TS" frame. -- Backward Inclined; high pressure Airfoil Wheel; NYB "AF-40" Fans: Extend the pressure capabilities of backward inclined fan designs to the higher pressures found in heavy industrial process applications such as: Boiler forced-draft; combustion air; solvent recovery; recirculating air. -- Owner states: This fan is unused. -- Weight: 2,664 Lbs.

NEW YORK BLOWER - 362 PLR: General Purpose Air Handling Fan -- Flat backward inclined blade. General Purpose fans are suited for moist & mildly contaminated air in industrial-plant ventilation, dust collection (clean air side) and process-air, comercial-institutional ventillation applications. -- 50 HP; 1,180 RPM NEMA premium Inverter Capable Motor. -- Rated at 21,600 CFM @ 5" Static Pressure, 1132 RPM,(Max 1360), 23.3 BHP, and air density 0.075 Lbs/cubic foot. Class II. -- 56.9 AMPS @ 460 V; 60 Cy; 3-Phase. -- Size 36 PLR, Wheel dia.,36.5". Outlet area 7.66sq. f ((40.75x 20.5") approx 40" inlet dia. -- 40" x 27" Flanged outlet. -- Dimensions/Weight: 71" L x 70" W x 68" H; Weight: 1,200 Lbs.

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.

Newman T-20 MortiserSpeifications -- 0.5 HP Motor, push button magnetic starter, foot treadle operation, with compound tilting table, manual holddown.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6r NEWMAN S-248 24" x 8" Single-Sided Planer Specifications: Planing thickness 1/16” - 8”. Min. stock length 13”, 4” Butted. Infeed & Outfeed table sizes 24" W x 16-3/4” L. Feed speeds 20 - 100 FPM. Equipped with: 4” Dia. 4-straight knife cutterhead. Segmented serrated upper with 2” W Spring-loaded segments & (3) Solid steel lower feed rollers. Chip breaker, with 2” W Reversible spring-loaded segments.

NEWMAN WHITNEY S-282-18 Top & Bottom Planer 18" Wide Fully ReconditionedSpecifications: -- Shortest Stock (not butted) 48" -- Top Head: 40 HP 3,600 RPM Direct Drive -- Bottom Head: 25 HP 3,600 RPM Direct Drive -- 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls -- Infinitely Variable Speed Feed Control from 40 - 150 FPM -- Newman Six-Row "Quiet Cut" Helical Carbide Cutterheads -- Feed Works Consist of Two Pivot Mounted Top Feed Rolls -- Top head Chipbreaker with 3" Sections and Independent Yield of 1-1/2" -- Air Operated Pressure Bar -- Top Head Power Hoist -- Automatic Cut Control -- Anti-Lap Device -- Grinding & Jointing Equipment -- Dust collection required - 6400 CFM total (3545 Top and 2855 Bottom) with 6500 FPM velocity at each portEquipped With & Features: -- Infeed Conveyor is Hydraulic Driven 192" Long X 18" Wide -- Push Button Controls -- Hydraulic Pump Unit 15 HP, -- Cutterhead Grinder and Jointer Included

NEWMAN/Cameron - KF-24: Dip Chain Gang Rip Saw with CAMERON "34H-M1" Infeed SystemSpecifications -- Saw Arbor: 24" Arbor cap.; 14" max. dia. tooling; 4" max. motorized thickness adjustment;22" min. length for glue joint accuracy; 6" throat. -- 2-13/16" Dia. arbor; 24-1/2" capacity saw sleeve arranged for 3-1/8" dia. bore saw blades; saw blade options: 10" - 14" Dia.; spacers: 4-5/8" dia. includes: (1) Saw sleeve and spacers. -- 75 HP - 3,600 RPM TEFC Direct drive motor; arbor with: Disc brake & load meter; arbor lockout on the access door. Feed & Chain: -- 5 HP Variable feed speed: 20 to 100 FPM with: Jam arbor protection. Dip bed carried on: 5" Pitch hardened Double-V chain; hardened dip cams; extruded structural aluminum feed bed slats with: Replaceable steel-backed rubber insert strips; automatic chain oiler with low level shutoff. -- (2) 4" Dia. air loaded overhead pressure rolls; spring-loaded overhead bed plate; pressure rolls & bed plate unit with motorized adjustment; slide type infeed guide with: Handle block; either side of the guide can be used for a stock engraver. -- Anti-kickback finger system with: (1) Lower & (2) upper on infeed; (1) upper kickback on outfeed. Equipped with & Features: Upper outfeed main dust hood: 7-7/8" Dia. 2,150 CFM Infeed dust hood 4-7/8 dia. (855 CFM). (1) Spare sleeve; (2) setup fixtures; generous array of spacers (see photos).

NORDSON DURABLUE 16 1069743A 16 L Hot Melt Glue UnitSpecifications: -- Tank cap. 16 L (4.23 Gallons). -- Melting rate 27.7 Lbs./Hr. -- Temperature range 100° - 400° F.Complete with: -- Gun. -- Heated Hose. -- Cart.

NORFIELD - 5000 + 5100 + 5200 Package: Door Line. - Used NORFIELD Door Line includes: NORFIELD - 5000: Door Machining Center. NORFIELD - 5200: Automated Door Loader. NORFIELD - 5100: Assembly Center.NOTE: The following information/specifications are provided for reference and needs to be verified by Buyer prior to purchase. -- Door capacities: 1-1/2' to 3-1.5' Wide x from 6-1/2' to 7'-0" tall x from 1-3/8" to 1-3/4" thick. Jamb capacities: 2-1/2" to 10-1/2" wide x 6-1/2'" to 7'-0" tall x from 1/2" to 1-1/2" thick. -- For flush, stile, and rail; and louvered doors and: Flat, split, & rabbeted jambs. -- For lock: 2-3/8" & 2-3/4" backsets; hinge mortising for: 3-1/2" x 3-1/2" & 4" x 4" x 5/8" Radius; faceplate router up to: 1-1/4" x 2-3/4"; hinge radius of: 5/8"; hinge pattern adjustable from: 29" - 33" center-to-center. -- Machining cycle: Under (30) seconds. -- Door clamps up: Eliminating changeover for interior & exterior doors. -- Lock drilling from underside of door enables operator to: View exit cut & provide quality control. -- Automatic butt routing system with: Chip breaker for clean mortising. - Automatic changeover: Between 3-1/2" x 3-1/2" & 4" x 4" hinge mortising. -- Automatic lock machining; drills for lock & latch and routes for the faceplate in: (1) Cycle; centrally located electrical panel provide: Safe & easy operation. -- Automatic changeover for: Interior & exterior doors; eliminates adjustment time. -- Microprocessor technology: Minimizes maintenance downtime. -- 6 CFM @ 90 PSI; 1,900 CFM @ 8" Dust outlet.NOTES: -- All equipment as taken from service. -- Does not include: Setup or installation; freight. - Available at additional cost. -- Photos describe the machinery as it was removed from service and not in reconditioned form. -- This equipment was installed adjacent to a KVAL COMMANDER Door Machine and kval 555 Door Sizer/Beveller and shared with a Norfield Door Loader. See DM-010597

NORFIELD - 250-M: Strike Router -- Strike Router capacity: 9' Length x 1-5/8" thickness cap.; infinite width; mortising plate & bolt relief in: (1) Continuous operation. -- 1-1/2 HP Router: Processes any strike up to 4-7/8" long, including T-strike. -- Rectangular relief leaves more wood in jamb for greater strength and more professional appearance.

NORTH AMERICAN PL-30 ROTARY PHASE CONVERTERPro-Line is the Professional Series, digital start, CNC rated, general purpose single phase to three phase rotary phase converter designed to take standard single phase energy and supply full running current to three-phase equipment.Equipped with: -- Control Panel -- NEMA 1 Enclosure (Indoor) -- Built-in Motor Starter -- Digitally Controlled and Protected Start Circuit -- ABB / Baldor Idler Generator Motor -- ODP (Open Drip Proof) – Indoor Rated -- Soft Start -- 10-Year Parts / Lifetime Labor Warranty

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6q NORTHFIELD 12HD 12" Heavy-Duty Jointer Specifications: Max. depth of cut 5/8", Rabbeting cap. 5/8" x 12". 17” x 51-1/2” x 32-1/2” H. Outfeed table size 17” x 43” x 32-1/2” H. Equipped with: 3-1/2” Dia. 3-Knife Cutterhead. 5 HP - 1,735 RPM Motor. 52” L x 5-1/2” H Cast-iron fence, with 0° - 45° Tilt. Swing-away guard.

NORTHFIELD Unipoint X-36A Radial Arm SawSpecifications: -- 5 HP Direct motor drive, 16" max. blade dia. x 1" dia. arbor, 4-1/2" max. depth of cut, 1-9/16" max. dado cap. -- 25" Max. crosscut (17-1/2" w/fence in normal position) and 31" max. ripping cap. (23-1/2" w/fence in normal position). Maximum 45 degree Miter:Guide Fence Regular Position 4" x 12-1/2"; moved to rear 4" x 14-1/2"; max. 70 degree miter; guide fence regular position 4" x 6"; moved to rear 4" x 8-1/2". Max. compound 45° miter 3" x 12-1/2"; motor raises to center of arbor to table top, max 10"; motor lowers center of arbor to table top, min. 3-5/8".Saw tilts to left 45°; saw pivot to right 70°; saw pivot to left 45°.Complete with: -- Safety guard w/kickback preventer, automatic blade return device & push button magnetic controls; 25" x 48" table; 32" table height.Approx. 1944 Monarch Unipoint Radial Arm Saw with I believe additional US government wartime tagging. The original designers and manufacturer of the Unipoint Radial Arm Saw that Northfield bought the rights to and still makes today.

NORTHTECH - NT-920C-200: 2-Head Planer Sander Specifications -- 2-Head. 37" width cap.; 1-knife planer head followed by a wide belt sander head. -- 0" - 6" Motorized opening with: PLC control; keypad entry; LED readout for part thickness. -- 1st Head. 6" Dia. helical planer head with: (6) Rows of staggered carbide inserts; each insert has (4) usable sides; 30 HP motor. -- 2nd Head. Combination sanding head with: 4-5/8" Dia. rubber covered contact roll; 2-1/2" wide finishing platen; 20 HP motor. -- 37" x 75" Abrasive sanding belt; solid-state belt tracking. -- 3 HP Variable feed drive from 15 - 50 FPM; endless belt conveyor with automatic tracking.Complete with: -- Infeed over thickness bar. -- Emergency stops at infeed & outfeed. -- Air-operated disc brakes on sanding heads. -- Electrical interlocks on main access doors. -- Electrical controls with overload protection. -- Motor load meters. -- Panel cleaning brush.

NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

NORTHTECH NT-6108ES-6 Edge SanderSpecifications: Sanding Belt is powered by a 3 HP 230/460V motor. -- The platen measures 6-3/4″ X 39″ and has NEW graphite. Rubber covered direct drive pulley. -- Equipped with: (1) 7-3/4" x 37" Adjustable side table and (1) 11-1/2" x 19" Adjustable end table; both side & end tables have vertical table travel w/hand wheel adjustment. Complete with: -- Magnetic controls with overload protection & dust hood with 4" dia. outlet.

NORTHTECH NT-610HC Double Surfacer:Specifications:: -- 24" x 8" Cap., min. Material length: 12". Table size is 111" x 24". -- 40 HP top and 30 HP bottom belt-driven motors -- Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 20 - 110 FPM powered by a 3 HP feed motor -- Feed works driven via gearbox and heavy-duty Cardan Shaft Drive -- 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are spiral insert knife heads with 30 x 12 x 2.5 mm insert-type knives.Features: -- Rugged cast iron and plate steel fabrication; -- Infeed conveyor/carpet (spiked) allows precision jointing accuracy, especially on warped or twisted lumber. -- Computerized top cutterhead positioner is accurate to +/-0.001"; -- Chromed beds; Guards and skirts for operator safety. -- Machine dimensions: L2830 x W185 x H1700 mm, Weight: 10,500 Lbs -- Dust Collection: 3600 CFM

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5z NORTHTECH NT-EV-920RC DUAL HEAD WIDE BELT SANDER 2-Head wide belt sanding machine with 37" capacity. - Heads: 1st head: 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. 2nd head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. Two (2) infeed and outfeed spring loaded hold-down rollers; 2 HP variable speed feed drive. Sanding belt size: 37" X 85" and with electronic belt tracking. Motorized opening between the conveyor and sanding bed. Ammeters for measuring motor loads.

NORTHTECH NT-EV-920RC Dual Head Wide Belt Sander2-Head Wide Belt Sanding Machine with 37" capacity. Specifications: -- First head 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. -- Second head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. -- Two (2) infeed and outfeed spring loaded holddown rollers; 2 HP variable speed feed drive. -- Sanding belt size: 37" X 85" and with electronic belt tracking. -- Motorized opening between conveyor bed and sanding heads. -- Ammeters for measuring motor loads. -- Includes spare abrasive belts.