STEFANI SOLUTION 8600 (W/PRE-MILL & CORNER ROUNDING) + CNC HORIZONTAL & VERTICAL POSITIONING. Basic Specifications: 0.4 - 25 mm 0,98") Edgebanding cap., 90 mm (3.5")min. panel width, 220 mm (8.66") min. length; 10 - 60 mm (2.36") panel thickness; variable feed speed 10 - 30 MPM (33 - 98 FPM). -- Front-End equipped with: Pre-Milling, 4.4 kW (6 HP) - 12,000 RPM motors with Servo driven infeed fence, 2-Roll Vertical Coil Magazine. -- Gluing System: Large 22 kG capacity overhead "fast heat-up" granular glue system, Teflon coated lower applicator glue pot, 1" dia. glue applicator roller w/reversible rotation through PC. -- Pressure Section: Servo controlled, (1) large dia. clutch controlled drive roller and (5) pneumatic pressure idle rollers.WORKSTATIONS Edgebanding: -- End Trimming, front & rear beam mounted end trims (0.35 kW - 12,000 RPM ea.), motors tilt 0° - 22° on horiz. plane. -- Pre-Trimming (flush), top & bottom super imposed (0.75 kW - 12,000 RPM) motors. -- Fine Finishing: Top & Bottom flush/bevel/radius trim station (1 kW - 12,000 RPM ea.), motors bevel from 0° - 30°, Servo motor positioning for easy setup. -- Corner Rounding with: (4) Motors (0.35 kW - 12,000 RPM each); 2-postition preset trimming through controller. -- Profile Scraping Unit: Top & Bottom for thick PVC, quick change insert knifes for different edge thickness scraping; PVC shavings collection box; air pressure nozzles to support removal. -- Flat Glue Scrapers: Top & Bottom pneumatic controlled scraping knives with bearing guide-wheels. -- Buffing Unit: Top & Bottom oscillating (0.4 HP - 3,000 RPM motor ea.), units tilt 0° - 10°. -- Reactivation Unit: Top & Bottom hot air blowers to reactivate potential discoloration on certain PVC edges.Control & Operation: -- Windows XP based "WinEdge" operator interface, unlimited program capacity, input/output on-screen viewing, hour meter, linear foot meter, unlimited program storage, ON/OFF control of all working units, productivity reports. -- Servo controlled raise & fall of pressure beam, 80 mm V-grooved top belt; 3/4" track chain with "non-slip" chain pads. -- Features & Supplied with: Insulated sound enclosure w/large window area, rotating operator control panel at eye-level height, telescopic panel support, frequency inverter & used tooling. -- Actual Model is STEFANI SOLUTION 8600

STEFANI MD-RM EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + EVA/PUR GLUING TECHNOLOGY: Production Edgebander: -- Specifications: 0.3 - 15 mm Edgebanding cap., panel thickness (min./max.) 10 - 60 mm; panel width min. 90 mm (3-1/2"); panel length min. 140 mm (5-1/2"); variable feed speed 10 - 25 MPM (33 - 82 FPM).Frontend equipped with: -- Air Cushion infeed table: To facilitate insertion of work pieces; 600 mm x 1,600 mm. -- Pre-milling: (2) Motors, 4 kW (5.3 HP) - 12,000 RPM ea. -- Horizontal Coil Magazine; spraying unit (Anti-sticking liquid).Gluing System: -- Hot Melt Glue + Quick Melt System; additional PUR Glue Pot. -- Pressure Section: (1) Large dia. clutch controlled drive roller and (4) pneumatic pressure idle rollers.WORKSTATIONS: -- End Trimming: Front & Rear (0.55 kW - 12,000 RPM ea.); motors tilt 0° - 22° on horiz. plane. -- Rough Trimming Unit: Top & Bottom flush trimming (0.55 kW - 12,000 RPM ea.) with pneumatic setting for flush or slight overhang. -- Fine Trimming Unit: Top & Bottom radius or chamfer trimming, Servo driven positioning to process up to (3) radii and chamfer trimming; tiltable from 0° - 25°. -- Corner Rounding Unit: (2) Motors (0.35 kW - 12,000 RPM each); for complete panel machining with double corner rounding and top & bottom edge trimming function; automatic positioning to change between radius and chamfer trimming. -- Multi-Profile Scraping Unit: Top & Bottom for thick PVC; automatic positioning for different edge thickness and radius scraping; PVC shavings collection box; air pressure nozzle to support removal. -- Flat Glue Scrapers: Top & Bottom pneumatic controlled scraping knives with bearing guide wheels. -- Buffing Unit: Top & Bottom oscillating (0.3 kW - 3,000 RPM ea. motor); units tilt 0° - 15° with hot air blower to restore edge color; an adjustable heater up to 3,500 Watts. OPERATOR INTERFACE --Maestro Pro Edge: 21-1/2"; Touchscreen graphic interface; dynamic virtual process preview; real time status and user-friendly interface; automatic batch size, one processing with function and tools for a separate working unit management. It is not necessary to empty the machine when changing programs. -- Just In Time piece & edge programming in (10) Sec combined with Pro-Edge functions: Extremely fast and highly qualified processing mode (including edge tolerance compensation). -- Servo controlled raise & fall of pressure beam, 80 mm V-grooved top belt; 3/4" track chain with "non-slip" chain pads.Features Include: -- Insulated sound enclosure w/large window area; rotating operator control panel at eye-level height; telescopic panel support, frequency inverter.

STEFANI ONE TOUCH HEAVY DUTY PRODUCTION EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + PUR/EVA Gluing Technology: -- Basic Specifications: Minimum Panel Spacing 24.625" (630 mm) between panels; Edge Thickness capacity 0.015" - 0.875 (0.4 - 22 mm); Panels thickness (min/max) 0.375" - 2,36" (10 - 60 mm);Minimum Panel Length 5.5" (140 mm), or 8.625" (220 mm) when "Corner Rounding; Processing Track Speed min/max 40 - 82 FPM (12 - 25 MPM) variable feed speed.FRONT-END EQUIPPED WITH: -- 2-Roll/Station Vertical Coil Magazine with "Automatic" change-over. Infeed Panel Heating Lamps. Spraying unit (Anti-sticking liquid). -- Pre-Milling: 4 kW (5.3 HP) - 12,000 RPM x 2 motors, with Diamond Tooling; -- Gluing System: "No-tool" "Quick-Change", Teflon coated Glue Pot; Electronic Controlled "Quick Melt" system with auto Kick-down."PU-BOX L" Gluing Unit Pre-Melting system with "Melt on Demand" for managing both EVA & PUR glue. all managed form the PC control.This unit "INCLUDES" the SPG Glue pot for PUR + the standard glue pot for EVA. "SPG" Glue Pot for managing both EVA & PUR Glue, capable of emptying the glue pot in 8-minutes, through the PC controller & can be disassembled in less then 10-minutes for cleaning & maintenance. -- Pressure Section: PC Servo Controlled with (1) large dia. clutch controlled drive roller and (5) pneumatic pressure idle rollers with opposite tilt traveling on THK guides, all rollers have "JUMP" capacity.Heavy-Duty Guillotine. 35 mm dia. Reversible glue roller for solid wood application, with clamping device to eliminate any glue transfer on the trailing edge.WORKSTATIONS: -- Top Mounted End Trimming:0.8 kW - 12,000 RPM Motors x 2; Motors Automatic Blade tilt from 0° - 22° on horiz. plane. -- Flush Trimming "R-E": "UPGRADED" 1.84 kW - 12,000 RPM motors x 2, Top & Bottom flush trimming station. -- Multi-Edge Finish Trimming: 1.1 kW - 12,000 RPM motors x 2; Top & Bottom bevel/radius trimming station with up to 30° tilt; NC controlled "Multi-Edge" kit for (3) automatic position, straight, 1mm radius & 2mm radius, preset through controller. -- Corner Rounding: (4) Motors (0.35 kW - 12,000 RPM each); 2-postition (1 & 2 mm radius) preset trimming through controller. -- Profile Scraping: NC Controlled, Top & Bottom profile scrapping units with 2-postition (1 & 2 mm radius) adjustment through the controller; PVC shavings collection box; air pressure nozzle to support removal of scrap. -- Glue Scrapers:Top & Bottom pneumatic controlled, flat scraping knives with bearing guide-wheels. -- Hot Air Edge Brightener:To re-embellish the color & help eliminate scrapper marks -- Oscillating Buffing Unit: 0.3 kW - 1,500 RPM motors x 2; Top & Bottom oscillating buffing wheels for cleaning/finishing material edges; units tilt 0° - 10° to prevent wear grooves in the buffing wheels.Operator Interface: -- Stefani "StarTouch" + Windows "XP" operator interface, with NC controlled adjustment for all working units.17' TFT screen; ETHRENET Network c

STEGHERR - BOF, ...Through Feed Arch MoulderAutomatically feeds arched or curved parts for profiling or sanding. Feeds & contours parts with a radius of 6" or more and a max. material height of 3-1/4". Specifications: -- Feeds & contours parts with a radius of 6" or more and a max. material height of 3-1/4". -- (1) 1-1/4" Horizontal spindle at 5.5 HP - 7,500 or 1,500 RPM for sanding. -- 5" - 6-1/4" Tool dia., 4" spindle length capacity. -- 0.33 HP Feed motor, forward & reverse variable feed speed from 3 - 26 FPM. -- Flexible mounted 5-roller system guides and feeds workpiece. -- Simple setup allows for rapid changeover of different widths, no changeover required when machining same profile onto variety of arch radii. -- Complete with: Overhead hood assembly and dust outlet.Machine is currently wired for 220 Volt / 3 Phase power.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6p STEGHERR KSF Closed Halving Joint Cutter (Cross Joint Milling Machine) Specifications: Max. width 53 mm (2.09"), Max. depth 72 mm (2.83"). Table size 9-3/4” x 26” x 34” H. Tool dia. (2) 150 mm (5.91") & (1) 180 mm (7.09"). Spindle speeds 6,300 RPM. Equipped with: (2) 2.2 kW (3 HP) - 3.470 RPM Motors. Hydro-Pneumatic table feed. Pneumatic clamping. Fence. Foot pedal control. Complete with 1740 mm (68.50") Length stop gauge.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5d STEGHERR RSP-2 Semicircular Arch Screw Press Specifications: Designed to build arches & elliptics for windows & doors. Dia. 16" - 48". Max. workpiece thickness 16". Max. surface pressure 15 Tons. Complete with: (3) 16” W & (3) 8” W Bands.

STEGHERR KPP Vertical Edge Gluing Bander; 2,600 mm (102") Working length, 53 mm (2.08") max. workpiece thickness, solid edge material up to 25 mm (1") thick, edge pressure 6 kg/cm (13 Lbs) pressure for the length of 2,500 mm and thickness of 20 mm at 3.5 bar.Specifications: -- Panel and wood strip are positioned into press chamber, maximum edge strip 2" X 1-1/2". -- Foot switch activates the air tube pressing system, and continuous bottom and side pressure evenly distributed over the entire workpiece allows tight glue joints (panel clamping pressure 80 PSI, edge strip clamping pressure 55 PSI). -- Panel heating unit - 850 watts (220 V, 1 Ph) temperature control from 40° - 150° C (104° - 300° F). A moveable clamp gauge positions the edge strip for drop edges or overhangs.Features: -- Special stop gauge allows for the positioning of mitered corners. Average PVAC glue cure time 40 - 70 Seconds.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i58 STEINEL SH4D Horizontal Milling Machine, with "FVK3" Universal Vertical Head. Specifications: Table size 7-3/4” x 29-1/4". Spindle speeds 125, 200, 315, 500, 800, & 1,250 RPM. Complete with: 4" W Machine Vise.

STEINEMANN OSUS NOVA 160/6 K-FS/NS-OPTIMAT Top and Bottom Calibrating Sander(6) heads consisting in 2 machines, first machine top/bottom opposed head. Secoind machine (4) head with Combi and finishing platenFeatured: -- 2-Head K, (1) top & (1) bottom; both heads directly opposed. for calibrating -- (4) head FS/NS top/bottom first Combi head, second finishing platenSpecifications:First machine Calibrating Sander: -- Top/bottom opposed single head -- Working width 1,600 mm (63") both heads 11" dia. steel contact roll -- Thickness capacity 3 - 150 mm ( 1/8" - 5.9") -- Working height (passline) 1400 mm (55") -- Cutting speed on K head 34 M/sec. (6,667 SFM) -- Tolerance within the board +/- 0,075 mm (+/- 0,003") -- 100 HP motor each head. -- 63" x 103" Abrasive belt size. (to be confirmed) -- Air jet abrasive belt tracking. -- Variable feed speed 7 - 43 M/min. (24' -138"/min.), 20 HP feed motor,. -- Control panel for this machine only Second Machine Finishing Sander: -- Top/bottom (2) head each as Combination drum/platen and finishing platen -- Working width 1,600 mm (63") both heads 11" dia. steel contact roll -- Thickness capacity 3 - 150 mm ( 1/8" - 5.9") -- Working height (passline) 1400 mm (55") -- Cutting speed on FS head 22 M/sec. (4,330 SFM) -- Cutting speed on NS head 22M/sec. (4,330 SFM) -- Tolerance within the board +/- 0,075 mm (+/- 0,003") -- No motor installed -- 63" x 103" Abrasive belt size. (to be confirmed) -- Air jet abrasive belt tracking. -- Variable feed speed 7 - 43 M/min. (24' -138"/min.), 20 HP feed motor,. -- Control panel for this machine Not included: -- infeed and outfeed conveyor -- Conveyor between the machine -- “all the control wiring goes into a cabinet that is separate on each machine. That is just the wiring for the sensors and solenoids for braking and belt tracking stuff. There are no motor controls with these so there are no starters included. The 2 head comes with (2) 150 HP motors and the 4 head has no motors on it. In order to make these operational you would need a PLC and HMI to run the controls and motor starters and would need to buy motor controls

STENNER ST-9 Vertical ResawSpecifications: 36" Wheel dia., 20 HP TEFC motor w/STAR-DELTA starter, V-belt drive to bottom saw pulley for 7,000 FPM blade speed, 4" max. band width (17'8" long), 14" max. cutting height (table top to guide); feed-works for dimension. -- Features: -- Center splitting and off-center equalizing cutting, (4) serrated feed rolls for speeds from 25 to 100 FPM, 9" max. opening to right & left of blade - 18" total. -- Includes: -- Right-hand fence with steel idle rollers tilts 45°; foot operated brake and feed disengage, manual adjustment of feed roll setting & top guide.

STETON P85 Hydraulic Cold PressSingle platen hydraulic cold press -- Platen size 1,300 mm X 2,500 mm (51" X 98") Overall platen size -- Side loading on 98" side. -- 420 mm (16.5") Max. daylight opening. -- Pressure from bottom (4) 3.34" diameter upstroke hydraulic pistons. 2 HP hydraulic pump. 90 PSI.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6f STRIEBIG STANDARD 5192A/875 SSD 2 6-1/4' x 13-3/4' Vertical Panel Saw (No Scoring) Specifications: Max. depth of cut 3-1/8". Blade dia. 300 mm (11.81"). Arbor dia. 30 mm (1.18"). Blade speed 4,750 RPM. Equipped with: 4.4 kW (6 HP) - 3,450 RPM Motor. Fold out shelf. Lower roller supports.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i65 STROMAB RS/7 S 400 mm (15.75") Radial Arm Saw Italian-made! Specifications: Base size 49” x 49” x 31-1/2” H. Table size: 44” x 55” x 36” H. Rip cap.: 42" Out & 24" In. Equipped with: 6 HP - 3,400 RPM Motor.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5j STROMAB STA 3J0 4' x 9-1/2’ Pneumatic Door & Frame Clamp Specifications: Horizontally adjustable in 2-1/2” increments.

STROUP 4' X 20' Cold PressSpecifications: -- 50" x 244" End Loading, Segmented, Bag press with motorized daylight opening. -- (2) Individually actuated, 50" x 122", segmented platens. -- Single air bag per platen with approx., 50 PSI specific pressure. -- Motorized adjustable daylight opening from 9" to 56". -- End loading with (2) rows of spring-loaded pop-up rollers in lower platen for easy loading/unloading of the press.

SULLAIR - LS12-60- HH/A/SUL, ...Rotary Screw Air CompressorSpecifications & features: -- 60 HP - 1,770 RPM Motor, rotary screw air end, 150 max. PSI, 250 ACFM; (2) asymmetrical lobe profile rotors, only make contact on a lubricated pitch line to virtually eliminate capacity or efficiency loss. Features: -- Tapered roller bearings on the discharge and cylindrical bearings on the inlet for high load carrying capacity, pressurized fluid lubrication & cooling of the compressor with rigid piping and tubing; efficient 2-stage air/oil separation with replaceable element. Complete with: -- Spin on fiberglass fluid filter; Heavy Duty inlet air filter. -- Capacity modulator stabilizes system pressure and matches output to demand (minimizes need for Air Receiver & reduces wear caused by start/stop). -- Electromechanical gauges & controls, air aftercooling; mounted on a steel frame bed with fork cutouts. -- (73,500) Total operating hours.

SULLAIR 10B-50 ACAC Rotary Screw Compressor (Open Type)Specifications: -- 50 HP - 1,770 RPM Motor, rotary screw air end, 100-110 max. PSI, approx. 180 ACFM; (2) asymmetrical lobe profile rotors only make contact on a lubricated pitchline to virtually eliminate cap. or efficiency loss. -- Equipped with: -- Tapered roller bearings on discharge and cylindrical bearings on inlet for high load carrying capacity. -- Pressurized fluid lubrication & cooling of Compressor with rigid piping & tubing; efficient 2-stage air/oil separation with replaceable element. -- Spin-on fiberglass fluid filter, Heavy Duty inlet air filter, cap. modulator stabilizes system pressure and matches output to demand (minimizes need for air receiver & reduces wear caused by start/stop). -- Includes: -- Electro-mechanical gauges & controls, air after-cooling.

SULLAIR S-ENERGY 2209D AC 30 HP Rotary Screw Air Compressor, with 39,568 Run Hrs. (As of 7/25/24) & Built-In Dryer?Specifications: -- Cap. 127 CFM. -- Operating pressure 125 - 135 PSI. -- Max. operating temperature 235° F.Equipped with: -- 30 HP 1,770 RPM Motor. -- Ethernet connection for remote monttoring. -- Sound enclosure. -- "WS" Digital controller, with LCD Display & Touchpad. Complete with: -- Built-In Refrigerated Dryer.

SULLAIR ES8-30H/A 30 HP Single-Stage Fluid Rotary Screw Air Compressor, with 53,186 Run & 49,602 Load Hrs. (As of 11/2023)Specifications: -- Cap. 111 ACFM. -- Rated pressure 60 - 125/135 PSIG. -- Noise level 85 dBA.Equipped with: -- E-Profile rotor design air end. -- 30 HP 3,530 RPM Motor. -- Air-cooled aftercooler. -- SULLAIR “SUPERVISOR II DELUXE"; Microprocessor controller & graphic monitor system, with LCD Display, Touchpad, Constant pressure & temperature readout of pressure, Power failure auto restart, & Automatic start/stop.

SUMMIT PR-9S 2-Ram Horizontal Baler -- Motor: 60 HP. -- Main Cylinder: 9". -- Eject Cylinder: 8". -- Feed Opening: 60" x 44" x 46". -- Cranston Wire Tie. -- Infeed Conveyor. -- Loaded onto your Truck.