MASTERWOOD PROJECT 313 CNC MACHINING CENTER (W/ACT/BORING): -- Specifications:Working Capacity:"X" Axis 3,080 mm (121"), "Y" axis 1,100 mm (43") width; -- Positioning Speed:Programming speed in X-axis 197 FPM (60 MPM), Y-axis 162 FPM (49 MPM), Z-axis 58 FPM (18 MPM). -- Boring unit:(13) independent vertical spindles, (9) in X-axis, (5) in Y-axis; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left- & right-hand panel edges. -- Machining:(1) 7.5 HP (5.6 kW) high speed router (1,000 - 24,000 RPM) by frequency inverter; 1.5 HP (1.1 kW), 6,000 RPM grooving saw with manual rotation for X-axis or Y-axis; -- Work Table: (6) moveable support rails with (2) vacuum cups ea., double zero settings, (6) pneumatic backstops and (2) pneumatic side stops creating (2) working zones. -- Operator & Machine Control:TECNOSUD "K68800" Microprocessor control for (3) axis, lineal, circular, and helical interpolation. Equipped with 14" color video graphic monitor, keyboard for data entry, 1.44 MB floppy disk drive, 64K RAM, RS-232 for possible connection to office PC, all mounted in separate free-standing control cabinet; features to run CPL/Parametric "TRIG" programming and "Spline" CAD/CAM. -- Complete with: Dual zone vacuum pump. Ontario Hydro approved electrics. -- Actual Model is MASTERWOOD PROJECT 313

MATH-EX (6) Position (Person) Basic Recycling Sort Line Specifications: -- 16 Feet x 32" Inclined feed conveyor with 48" high hopper and 2" high cleats @ 36" centers. -- 36 Feet x 32" Sort conveyor with infeed transition guides and Belly rest skirt one side. -- Sort platform with OSHA stair and handrail. -- (6) Sort chutes with 52" of clearance. -- 1-1/2 HP, 460 volt, 3-phase drives. -- (2) VFD Controllers mounted in control panel -- Pedestal style stand. -- Emergency pull cord stop or-E-stop for sort conveyor -- Motor wire and flex conduit for (2) conveyors shipped loose. -- (1) 6" Diameter Ceramic Drive Pulley -- (1) Stainless steel Back ChuteOptional Equipment: -- (2) VFD Controllers mounted in control panel -- Pedastal style stand -- Emergency pull cord stop or E-Stops for sort -- More wire and flex conduit for (2) conveyors

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication.. --4-Speed Feed: 62 - 93 - 124, & 186 FPM.

MATTISON - 202, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,400 RPM Saw arbor motor, 9" - 14" max. blade capacity, 1-1/2" diameter arbor, overhead arbor design. -- 4" Max. depth of cut, 13" min. stock length, 24" max. rip capacity to the right of the blade, 77" x 65" table size.Equipped with & Features: --Overhead holddown with: (6) Pressure rollers, (3) front and (3) back; 2 HP feed drive, (4) feed speeds of 56 - 84 - 112 & 168 FPM (fixed at 25 FPM ).

MATTISON - 202: Straight Line Rip SawSpecifications -- 15 HP - 3,400 RPM Saw arbor motor; 9" - 14" max. blade capacity; 1-1/2" diameter arbor; overhead arbor design. -- 4" Max. depth of cut: 13" Min. stock length; 24" max. rip capacity to the right of the blade; 77" x 65" table size.Equipped with & Features --Overhead holddown with: (6) Pressure rollers; (3) front and (3) back; 2 HP feed drive; (4) feed speeds of: 56 - 84.

MATTISON - 404: Straight Line Rip SawSpecifications -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.); 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from: Saw to left edge of table. -- 24-1/4" Between saw & column; 24" rip distance: To right of gauge. -- Top roller holddown with: 7-1/2" Shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features -- Overhead cutting design with: Single cast chain links. -- Chain with: Automatic oil lubrication. -- Variable feed speed.NOTE from Seller: Saw will give an 8-foot glue line!

MATTISON - 202: Straight Line Rip SawSpecifications -- 15 HP - 3,400 RPM Saw arbor motor; 9" - 14" max. blade capacity; 1-1/2" diameter arbor; overhead arbor design. -- 4" Max. depth of cut: 13" Min. stock length; 24" max. rip capacity to the right of the blade; 77" x 65" table size.Equipped with & Features --Overhead holddown with: (6) Pressure rollers; (3) front and (3) back; 2 HP feed drive; (4) feed speeds of: 56 - 84.Note from the seller : Chain and lead guides are in very good condition.

MATTISON 229 Push Feed Moulder4-Head Push Feed Moulder, 4" x 10" capacity. -- Head sequence: 10 HP Top head, 10 HP left head, 10 HP right head, 10 HP bottom head. -- 20 HP feed motor. -- 2-1/8" dia. top and bottom spindles; 1-13/16" dia. left and right spindles. -- Includes (6) extra heads that go with the machine.Approximate dimensions of 11 feet long, 4.5 feet deep, and 5.5 feet tall. The machine weight is approx. 5 Tons.

MATTISON - 69- 54: Automatic Lathe -- 54" Length capacity with working dimensions: 4" x 4" Max. x 3/4" x 3/4" min. -- Hopper feed with: Automatic chucking and pop-up. -- Spindle drive: 25 HP Motor; spindle dia.: 2-5/8"; arbor speed: 2,700 RPM. -- Feed rates: 2 - 45 RPM; Variable feed speed and double-end drive.NOTE: Lot of additional knives & heads available at additional cost.

MATTISON - 69-42 MATTI-MAX: Heavy-Duty Automatic Rotary, high production Turning Lathe with Hopper FeedMicroprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor; 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 25 HP - 2,700 RPM Cutterhead Drive; 2-5/8" dia. arbor with variable speed. -- 2 - 45 RPM Stock rotational speed with: 1.5 HP DC Drive (reversing) & self-contained hydraulic unit for precise feed control.Complete with: -- Automatic hopper feed; MATTI-MAX microprocessor-based PLC Controller with keypad entry; machine functions & operation parameters are set directly from the control; RPM of workpiece & feed rate can be programmed to vary during the cut.Matching the feed rate to the stock rotational speed produces an efficient cut.Features -- MATTI-MAX Allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. -- Pneumatic tailstock with: Dual pressure to ensure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load: 26.5 HP. -- Setup Stand.NOTE: Large quantity of knife & heads available for additional cost.

MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor, 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 20 HP - 2,700 RPM Cutterhead Drive, 2-5/8" dia. arbor with variable speed, 2 - 45 RPM stock-rotational speed via 1.5 HP DC drive (reversing) & self-contained hydraulic unit for precise feed control.. -- Complete With: Automatic hopper feed; MATTI-MAX microprocessor-based PLC controller with keypad entry; machine functions & operations parameters are set directly from the control; RPM of workpiece and feed rate can be programmed to vary during the cut. Matching the feed rate to the stock-rotational speed produces an efficient cut -- Features: MATTI-MAX also allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. . Pneumatic tailstock with dual pressure to insure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load 27 Amps.

MAX-PAK MP 60 HD-15 Vertical BalerSpecifications: -- 15 HP Motor --Nominal Bale Size 60" x 30" x 48" --Bale Weight Up to 1000 Lbs OCC --Platen Pressure 40.91 PSI --Average Cycle Time 49 Seconds --Loading Height 54-1/2" --Ejector System Semi-Automatic --Full Bale Switch Standard

MAYER PS 9Z Front Load Panel Saw 149.6" Cutting length (3,800 mm), 4.1" (105 mm) max saw blade projection,Equipped with: -- 17.5 HP (9 kW) main saw motor & 1.5 HP (1.1 kW) scoring motor, 355 mm dia. main blade and 127 mm dia. score blade dia.; saw carriage with rack & pinion drive, forward cutting speed 16 - 230 FPM, constant return speed 232 FPM. -- Electronically controlled overhead program fence with rack & pinion drive on hardened & ground guideways, forward speed 80 FPM, return speed 196 FPM. -- Saw Table with: (7) Clamps (open up to 3.1" / 80 mm), of which (3) are closely spaced in crosscut area and the other (4) are at equal distance in rip cut area; AC Servo motor drives on both the saw carriage and pusher fence; rear table with double row support rollers. -- Features: -- PC Front-End WINDOWS XP Operating System, moving graphics displayed on 14" color monitor mounted in a pivoting console, (2) serial & (1) parallel interface; data input by PC keyboard, prepared for possible direct downloading from office PC. -- Control System Features: Automatic cutting length (material is scanned by sensor underneath the packet on the saw bed), electronically controlled automatic cutting height adjustment, automatic trim calculation; cabinet air conditioning. -- Includes: -- (8) Rear support rails with rollers; 78.7" long cross-cut fence; automatic side aligner (.75" to 51") with automatic presetting; rear slotted pressure beam to minimize off-cut; (3) front mounted air table (78" x 25"); plastic segmented safety guards on front of pressure beam; safety fencing around the back section of the machine.

The MB ROBA-TECH 1300/2 is an industrial rotary brush sander used for sanding, deburring, and surface finishing solid wood components, MDF, lacquered panels, and profiled parts. The machine utilizes a system of rotating abrasive brushes combined with a vacuum conveyor belt that holds parts firmly in place during the process, enabling uniform sanding even on complex surfaces, moldings, grooves, and decorative profiles. Its multidirectional sanding technology ensures optimal surface preparation for subsequent painting, lacquering, or assembly processes, enhancing finish quality and increasing efficiency in the industrial manufacturing of furniture, doors, and wood components.Machine type: Industrial rotational brush sander• Model: MB ROBA-TECH 1300/2• Operation type: Sanding, deburring, and surface finishing• Effective working width: 1300 mm (51"")• Vacuum conveyor belt feed system• Feed speed: 3 – 12 m/min• Integrated vacuum system for workpiece hold-down• Rotational brush sanding unit• Sanding speed: 30 – 140 m/min• Interchangeable abrasive brush system• Approximate effective sanding area: 1300 × 1500 mm• Sanding head with 360° rotation• Conveyor belt cleaning brush• Motorized height adjustment of the sanding unit• Touchscreen control• Power supply: 480V 3-phase• Approximate installed power: 16 kW• Industrial dust extraction system• Capability for sanding flat and profiled surfaces• Approximate weight: 2600 kg• Approximate dimensions: 3860 × 2400 × 2000 mm"

MB Roba-Tech - 1300/2: Denibbing Rotational Brush SanderSpecifications -- Feed Belt: 1,300 mm (51") working width. -- Feed Speeds: 3 - 12 MPM (9 - 36 FPM). -- Vacuum Bed System.Head Configuration -- Cleaning Brush for feed belt. -- Rotational Brush Sanding Unit. -- Working width: 1,300mm (51"). -- Sanding Speed: 30 -140 MPM (98 - 459 FPM). Equipped with & Features -- Touch Screen controls. -- Wired for: 480 V - 3 Ph.

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

MERCADOR - 40 HP Dual Shaft Shredder -- (2) 20 HP Motors. -- Only (43) hours.

MEREEN-JOHNSON - 2050: Double End Tenoner; (10) Heads(10) Heads Double End Tenoner with: Cutting/hogging; jump cope; cope; disc sanding; disc sanding. -- 96" Max. x 51/4" min. motorized opening. -- 30" Infeed in front of holddowns; 6" max. thickness opening; 7" max. throat; (2) tool posts; RH fixed, LH movable.Each side equipped as follows: -- 1st Station: Tilting trim/hog head (currently not installed); 360° worm gear tilt with: Indicator; 10 HP - 3,600 RPM motor; 1-1/4" dia. arbor; 12" to 14" tooling dia. -- 2nd Station: Jump cope head; 10 HP motors; 1 1/4" dia. arbor x 3-1/4" tool space. -- 3rd Station: High speed cope head; 10 HP - 3,600 RPM motor belt, driven to 6,000 RPM; 1-1/4" dia. arbor x 3-1/4" tool space; 6" - 9" tool dia. -- 4th Station: Tandem sanding wheels; 0.33 HP; counter-rotating. -- 5th Station: Tandem sanding wheels; 0.33 HP; counter-rotating. -- Feed Drive: Variable feed speed: 15 - 75 FPM; 7-1/2 HP feed motor with: Safety overload; MULTI-VEE smooth steel feed chains;, 1-3/4" wide. -- Feed lugs on: 10" Centers x 5/8" high. -- Non-powered upper holddowns with: Interlocking polyurethane pads.Includes -- Infeed over part thickness emergency stop. -- Infeed fence line with: Single handwheel adjustment. -- Centralized dust manifolds on each side of machine. -- Separate control cabinet with: ALAN BRADLEY "PanelView 1,000 interface." -- Sound enclosure.NOTE: Teardown not included.

MEREEN JOHNSON - 435-H: 50" Multi-Blade Sla-Bed Panel Saw -- Specifications• Max. working width: 50″. • Min. material length: 25".• Max. material thickness 2-1/2".• Arbor motor: 75 HP - 3,600 RPM.• Arbor motor with: Dynamic electric motor brake.• Arbor Size: 2-5/8″ x 61″.• Powered arbor up/down adjustment for rise/lower.• Feed: 3 HP; 20 - 75 FPM variable feed speed motor.• Bottom: Slat Bed type feed system.• Top: Neoprene pneumatic pressure wheels/rollers.• Safety: Anti-kickback assemblies.• Weight: Approx 15,000 Lbs. -- Complete with:• Feed system oil mist lubrication for: Chain surface & chain pins.• Automatic low oil & air supply level control system.• Shut off feed drive motor: Prevents running machine without proper lubrication.• Upper infeed pivoting anti-kickback assemblies: Provided for operator safety. -- Options include:(24) 10″ Blades; (10) blade collars, as pictured. -- Actual Model: MEREEN JOHNSON - 435-H 50"