16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

TAYLOR - 16 Section: Clamp Carrier -- (16) Sections; 8-1/2' wide. -- (6) Clamps per section; total of (96) clamps; 32" opening clamps; 2-1/2" high x 3-1/2" jaw width. Complete with: -- Pneumatic clamp tightening; air motor drive carrier rotation.NOTE: Tear down & loading not included.

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYLOR: 20-Section Clamp Carrier • 16-1/2' Width cap.; (12) clamps per section (240 approx. clamps total).• 32" Max. clamp opening; clamps with: 2-1/2" Jaw height.Complete with: -- Pneumatic torque wrench clamp tightening; pneumatic panel flattener; air drive carrier rotation.• Buyer will be responsible for: "Tear down" & "Loading!"

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

TAYLOR 40-SECTION Pneumatic Clamp Carrier;8.5' Width cap., (280 approx) clamps total with (6 to 7) clamps on every section, 32" max. clamp opening with 2-1/2" high jaws.Complete with: -- Pneumatic Clamp Tightener -- Pneumatic Flattener -- Air Rotation.Note: Tear down and loading not included

TAYLOR - 713A-5LCM: Rotary Door Clamp (5-Section) -- 5-Section rotating clamp for: Accurate squaring of Miter Doors & stile and rail doors. - Clamp & Square a door in: (2) Seconds. -- Each section has: 26" x 97" Max. cap.; 4" x 12" min. cap.; counterclockwise rotation with: Auto indexing stop system. -- Single lever operation with (2) vertical and (1) horizontal clamp, 500 Lbs. clamping force per cylinder. -- Electric gear motor runs on standard 110 V; variable speed push button operated rotation system - counterclockwise for safety.

TECHNO CNC SYSTEMS - HD 60120 - 5' X 10' CNC Router with ATC: -- 60" x 120" CNC Router: Front to back configuration; 4-zone T-slot phenolic vacuum table. -- Axis travel: X-Axis 62"; Y-Axis travel: 120;" Z-Axis travel: 9" with 7-1/2" clearance. -- Drive System. Rack & Pinion on X-, Y- with: Ball screw; Z-axis; anti-backlash ball nuts. Drive System. Stepper motor controlled with: Up to 800 IPM travel; repeatability: +/-.003 inches. -- Spindle. (1) 12 HP "ATC" Type spindle with: Rear mount 8-position tool rack; fully programmable speeds from: 6,000 - 18,000 RPM. Includes: Vacuum Hood; collet wrenches; ER25 collets; cover nut. -- Control System. Micro stepper controller with: Brushless motors; easy to use handheld control pendant; compatible for G & M code Drive System. -- Includes: (1) 8.9 HP - BECKER VTLF 2.250 Vacuum Pump; assorted tool holders; manuals & documentation.

TEGLE & SONNER - Shaper: Single Spindle -- This machine is a tank of a shaper with: 5 HP Motor. -- Features: Foot brake for the main spindle. -- Spindle size: 1"; 5-1/2" under the nut.

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

THERMWOOD CS45-510 5' x 10' CNC Router with ATC:The CS45-510 machine is a complete nested based CNC Routing System for machining cabinet boxes, custom furniture and support products. -- Equipped with: (1) 12 HP “HSD"; 3,000 to 24,000 RPM programmable variable speed router mounted to a servo-controlled Z-axis. -- (7) Positions wine rack tool changer rack. -- Machine: The "CS45-510" is a moving gantry, fixed table, CNC router. All axes are equipped with high efficiency ball screw drives providing feed rates up to 1,200 IPM. -- All linear axes ride on precision ground and hardened trackways with precision bearings. The machine base and bridge structures are heavy duty weldments designed to provide long term performance and reliability. The machine base is configured with steel mounting pads and leveling bolts. -- Control System: The "Thermwood QCore SuperControl" features a 19" wide full color LCD touch screen monitor, QWERTY keyboard, 1 TB SATA hard drive. It also includes a serial port for handheld programmer interface, variable 0 to 120% feed rate override and operator controls for start, stop, axis jog +, axis jog -, block step +, block stop - and feed hold. The control provides PCI bus expansion slots and is compatible with most Local Area Networks (LANs) as well as a variety of peripheral computer devices. -- The control uses a Microsoft® Windows® 7 Professional operating system. -- High-performance closed loop SIEMENS AC Servo drives on all axes. A network connection to the machine control with access to a high-speed Internet connection is required to use Virtual Service. -- Complete with: (1) BUSCH R5 vacuum pump. Portable handheld programming unit, auto lubrication, tool touch off, and manuals.

THERMWOOD C67S 5-Axis CNC Router, ... Gantry TypeSpecifications & Features: -- Table: 10' wide x 5' deep moving table design with 5-axis with an aluminum table with 1" thick tool and jig plate. -- Head Travel & Rotation: X-Axis (table travel) is 124", Y-axis (gantry travel) is 62", Z-axis is 36", rotational axis = 360°, tilt axis = 270°. -- Spindle PERSKE: Equipped with (1) 7.5 HP, "Quick Change" Electrospindle with ISO 30 adaptor (no tool changer), (3,000 - 18,000 RPM) with solid-state inverter, -- Lead Screw: With compensation for correcting pitch tolerance, zero-backlash ball nuts, high performance AC Servo drive system with feed speed up to 900 IPM; automatic lubrication system.Controls: -- THERMWOOD "91000 Super Control" version 5.05 software controller, programmable spindle speed option, compatible with major CAD/CAM and offline CNC programming systems; Automatic tool length sensor; Stand-alone, air-conditioned control cabinet.

TIMESAVER - TB-440-4, ...2-Head Wide Belt Sander40" Width cap.; Drum and Combination Head.Head Configuration:1st Head - 50 HP; 12" rubber covered contact head.2nd Head - 40 HP; combination platen head.Specifications: -- Sander completely rebuilt (15) years ago. -- Rubber covered abrasive rolls were recovered, grooved and balanced, along with ALL pinch rolls recovered at FLETCHER MACHINE CO., Lexington, NC. -- Electric eyes upgraded to BANNER's send and receive type; includes battery backup system for controls (no crashes when machine has power outage). -- Feed speed gear box driven by AC Drive controlled 10 HP motor. -- Rebuild included: Table removed and platens ground flat; all bearings replaced, including pinch rolls and tracking cylinders; tension cylinders plasma sprayed, reground & new factory seal kits. -- Entire machine was disassembled, sand blasted and DUPONT "Zolatone" primed and painted. -- RAINBOW brand feed conveyor belt replaced in 2014. -- Many more upgrades, too many to list: Please contact for additional information. -- Machine is in good condition, running daily, and has had regular recommended service intervals; includes all factory manuals, blueprint drawings, parts list with numbers supplied, and when machine was new. -- Machine used in solid wood wide belt sanding. -- Includes Cloth aluminum Oxide Belts: 7 - 50 grit; 1 - 60 grit; 8 - 80 grit; 2- 120 grit; 8 -1 80 grit..

TIMESAVERS 237-4IC Four-Head Wide Belt Sander37" Width cap. Drum, Drum, Drum, PlatenHead Configuration:1st Head: Rubber covered contact roll, 9-1/2" dia., 30 HP motor;2nd Head: Rubber covered contact roll, 9-1/2 " dia., 25 HP Motor. 3rd Head: 9-1/2" Grooved Rubber Covered Contact Drum With A 20 HP Motor4th Head: Finishing platen, 2-1/2" wide, 20 HP motorSpecification -- 37" x 75" abrasive belts with Pneumatic tracking. -- Motorized part thickness adjustment, height, 0" - 6" opening. -- Automatic part thickness adjustment, -- Infeed & outfeed spring loaded holddown shoes, -- Variable feed speed from 15 - 45 FPM, 5 HP motor. -- Pneumatic feed beltEquipped with & Features: -- Motor load meters, -- Infeed emergency stop bar, -- Controls mounted on belt loading side, -- Automatic Trabon bearing lubrication system, -- Disc brakes on sanding head motors, -- 30" infeed load area.Note: Some spec's need to be verified

TIMESAVERS - 2321-23-21: Planer Sander (2) Heads2-Head; 36" width cap.Specifications -- 1st Head. 6" Dia. Helical head with: (6) Spirals of 4-sided carbide inserts; 25 HP motor. -- 2nd Head. Combination head with: 5-1/2" Dia. contact roll and 2-1/2" wide finishing platen; 20 HP motor; sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments. -- Conveyor belt feed with Variable feed speed 20 - 45 FPM; automatic conveyor belt tracking. -- Anti-kickback fingers on infeed; planer head with sectional infeed shoe and double hold-down rolls on outfeed; double infeed and outfeed rubber-covered hold-down rolls on the sanding head. -- Motorized part thickness adjustment: 0" - 5" With mechanical digital readout. -- Minimum part length: 15"; Pass line height: 33" - 38". Complete with: -- Controls mounted on belt loading side; air activated caliper disc brakes on all heads; load meters for each head; 14" infeed loading area. -- Dust extraction: 3,500 CFM; compressed air usage: 3 CFM @ 90 PSI. -- Total load amps at 230 Volts: 145 Amps.

TIMESAVER 3345-23-001 (3300 Series) Wide Belt Sander36" Width cap, 4- Head Bottom + 4- Head TopHead Configuration (Bottom + Top): 1st Head: Rubber covered serrated 11″ drum, Duro 80-90, 40 HP motor, 5,250 SFPM.2nd Head: Rubber covered serrated 11″ drum, Duro 80-90, 30 HP motor, 5,250 SFPM.3rd Head: Rubber covered serrated 11″ drum, Duro 65-75, 30 HP motor, 5,250 SFPM.4th Head: Dual Action 7″ Combination head, Duro 50-60, Platen width 3", 25 HP motor, 2,800 SFPM.Specifications: The feed is VFD controlled from 15 - 45 FPM and features a centralized control panel with digital thickness readout -- Auto set up device for thickness. -- Conveyor Vacuum Bed. Double infeed and outfeed hold-down rolls. -- 37" X 75″ Abrasive belt sizeEquipped with & Features: Main motor load meters/Watt meters. -- Four bed jack screws.. -- Disc brakes on main motors. -- Motorized lift with 0 - 5″ -- 14″ infeed loading area and 15″ minimum part length.

TIMESAVERS 252-4-IC, ... Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels equipped with (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor.3rd and 4th Head: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HP motor each head.Specifications: -- 38" Constant pass line height of Vacuum conveyor with suction fan and motor bed assembly for veneer and solid wood sanding. -- Adjustable air floating infeed and outfeed hold down shoes. -- 52" x 103" abrasive belts with "POSI-TRAK" electronic tracking.Equipped with & Features: -- Motorized part thickness adjustment with mechanical digital readout. -- Auto part thickness set-up, 0" - 6" opening. -- Hydraulic feed belt operation of 15 - 45 FPM via 7-1/2 HP hydraulic pack. -- 4-Motor load meters, controls mounted on belt loading side. -- Disc brakes on sanding head motors. -- 30" Infeed load area.

TIMESAVER - 113, ...12" Width Single-Head Wide Belt Sander12" Width cap., single drum.Specifications: -- 12" Width capacity. -- 7.5 HP Main motor. -- 6" Dia. drum. -- 0 - 8" Opening capacity. -- 0.5 HP Feed motor. -- Complete with: Posi-Trac electronic tracking and a 12" conveyor extension.

TIMESAVERS 150-1v Wide Belt Sander;1-Head, 50" width cap.; contact roll head with 40 HP motor; 50" x 103" abrasive belt size, air tracking, 2-1/2" max. thickness cap., adjusted by scale; variable feed speed 40 to 100 FPM; incl. in- & outfeed extension. -- Used to have a checkrail edge sanding attachment for sanding sash (no longer available), but includes (1) extra set of new conveyor belts.

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.