MAKITA LS1013 10" Double Bevel Sliding Compound Miter Saw, with Stand Specifications: Miter angles 52° Right & 47° Left, with (9) Positive stops at 15°, 22.5°, 31.6°, & 45° Left or Right & 0°. Bevel angles 45° Right & 45° Left. Dimensional lumber cut capacity: 2" x 12" at 90° & 2" x 18" at 45° Left. Arbor dia. 5/8" Equipped with: 1,430 W - 13 A - 3,700 RPM Motor, with Electric brake. Complete with: DELTA "55-155" Universal Miter Saw Stand. Machine with Stand Dimensions: 104" x 28" x 59" H. Machine Dimensions: 30" x 28" x 25" H. Machine Weight: 50 Lbs. Stand Dimensions: 104" x 22" x 35" H. Stand Weight: 85 Lbs.

MAKOR Q1 Spray Line including Paint Pumps and Guns:This line was set up with the idea of adding a stack oven after the sprayer in the future if it is required. This line has seen very little use.Station #1: Infeed loading conveyorStation #2: MAKOR Q1 paper belt sprayer 3 circuits plus a cleaning circuit.Station #3: Powered roller conveyorsStation #4 (3) three lamp UV oven. Station #5: Outfeed conveyor. The line comes with (2) two paint pumps and (4) four spray guns, the brands GRACO MERKUR and GRACO spray guns. Reciprocating Spray Machine, Makor Q-ONE 1300 with Changeover SystemFlexibility, reliability, and ease of use, combined with limited managing cost and investment, make Q-ONE the ideal machine for companies with low-volume production applying water-based or solvent-based paints, or glues. Even companies switching to automatic coating applications for the first time can realize the advantages of the Q-ONE: Higher production and paint savings, uniform coating, and higher and more consistent quality.Structure and Transport System:The single steel frame guarantees perfect stability and the absence of vibration during the oscillating spraying. A part reading bar is located at the entrance of the machine to detect the workpiece shape to optimize paint consumption. The workpiece transport system consists of a paper belt or plastic film supported by a vacuum belt system makes the machine self-cleaning, eliminating downtime and maintenance costs, but does not allow the recovery of the sprayed productoverspray is prevented from accumulating on the lower side of the workpiece paper roll replacement is quick and easy.Spraying Group:The guns, mounted to oscillating supports, are adjustable to allow optimal orientation of the spraying zone the entire oscillating group is connected to the frame of the machine through pads that guarantee the absolute absence of vibrations, resulting in perfect paint quality on the workpieces, the pressurization of the zone containing the oscillating mechanisms extends its life and requires little maintenance.Four (4) guns can be connected to one of the three (3) coating circuits three (3) high-pressure circuits with recycle for coatings one (1) high-pressure circuit (without return) for solvent. Coating circuits have return hoses for quickly washing the circuit and for the recirculation of paint-standard supply provides two (2) gun holding plates with a quick disconnection system to allow for fast replacement of the spraying unit.Paper Unrolling and Rewinding System:The unrolling system at the entrance and the rewinding device at the exit are designed to maintain constant tension of the paper, avoiding breakage even when it is soaked by the paint, loading and unloading the support rolls are easy due to lateral pull out on wheeled carriers. An independent vacuum hold-down fan enables superior control of the paper belt rewind station and includes a self-adjusting system to maintain a consistently flat paper belt transport (

ROTOFAST 10 Panel Cleaner is designed for automatic cleaning of parts just prior to coating application for a dust-free finish. A rotating brush is combined with air blow-off units and an anti-static bar in order to efficiently clean flat or profiled parts of different shapes and dimensions. KEY FEATURES --Top surface One rotating brush with variable speed and height adjustment -- One de-ionizing (anti-static) bar -- One group of rotary blowers with timed entry -- One group of fixed blower nozzles with timed entry Bottom surface. -- One group of fixed blower nozzles with timed entry ÷ All components housed in single cabinet with suction hoods -- Feed speed adjustable by potentiometer -- Rubber pressure rollers to secure parts while brushing -- Belt conveyorWeight 600 Kg.

MAKOR Q-ONE - Feed Through Spray Machine. -- The Q-ONE Sprayer. Single Arm Reciprocating System with: Paper belt overspray collection; it combines: Productivity, flexibility, and quick changeover with a limited investment. -- This continuous belt Conveyor System, combined with disposable paper promotes: "Self-cleaning" machine; dramatically reduces cleanup & service time.Operation -- Suitable for all types of: Conventional coatings from solvent to water-based materials. -- Conveyor advances only when parts are present. -- PAPERBELT Conveyor System with: Vacuum belt to secure & support the feeding of the disposable paper; ensuring proper tracking & automatic winding of the paper roll. -- The paper roll changeover time: Only a few minutes. The panel: Lies flat on the belt, which prevents the transfer of overspray onto the bottom side. -- Spraying enclosure is pressurized via: (2) Intake fans and filtered by means of dry filters. -- This System allows: Clean air & maintains a consistent airflow throughout the Spray Cabin; also limiting the machine maintenance time to a minimum and producing an enhanced quality finish, control & containment of overspray, resulting in significant material economy. - Internal airflow is adjustable utilizing inverters. -- Spray System uses: Inverter drive; variable speed reciprocating trolley, which provides a consistent spray speed & pattern across the entire conveyor belt. Equipped with Spray System: (4) Spray guns; mounted on a "Quick-Change" gun support trolley. -- (2) High-pressure lacquer feeding circuits with: Recycle through a fluid distribution manifold (predisposed for [2] additional lacquer feeding circuits). -- PLC Touchscreen for: Clear visual operator interface; large memory storage of: Working programs; parameters; controls; diagnostic functions.Photo diode light bar reads: Location & size of part to be sprayed.Technical Specifications -- Working width: 0 - 1,300 mm (0" - 51"). -- Feed Motor: 0.75 kW; variable speed control from: 2.5 - to 5 MPM (8 - 16 FPM). -- Vacuum belt motor: 1.5 kW (2 HP). -- Paper Rewind Motor: 0.18 kW. -- Paper Roll: Dia. 21-1/2" max. (approx. 9,500 linear ft.). -- Reciprocator motor: 2.2 kW. -- Exhaust fan motor: 5.5 kW. -- Air Flow: 7,950 CFM. -- Pressurization air: 2 x 3,900 CFM. -- Total installed power: 13 kW.NOTE: Really still "Like New" with Very Low hours! It is probably still the original roll of paper on the machine!

MAKOR 'LP-8' Profile Sander. Feed Trough(8) Sanding stations, 7-7/8" max. width & 3-1/8" thickness cap.; -- (2) triangular belt design sanding heads, independently mounted columns, each with 4 HP motor, -- Variable speed from 100 - 2,750 RPM; approx. tilting range 120°. -- Feed Drive: 4 HP Gearbox feed drive; feed speeds from 23 - 115 FPM, -- Segmented rough top rubber belt feed, approx (8) sections, and adjustable rubber wheel hold downs; Lineshaft drive under the length machine with right-angle take-off to each belt segment. -- (6) Sanding Wheels:: Abrasive wheel/Disc-type sanding heads each with 4 HP motor dual speed for 700 or 1,400 RPM arbor, 8" max. approx. abrasive wheel dia.; units are independently mounted on their own columns.Heads Configuration: -- Head 1: Right Side, 6"; sanding belt, electrically positioned up/down, in/out, tilt. -- Head 2: Right Side, 6"; sanding belt, electrically positioned up/down, in/out, tilt. -- Head 3: Left Side, 6"; sanding belt, electrically positioned up/down, in/out, tilt. -- Head 4: Left / Top / Bottom, Rotary sanding head, approx. 4.5"; shaft length. -- Head 5: Right / Top / Bottom, Rotary sanding head, approx. 4.5"; shaft length. -- Head 6: Right Rotary sanding head, approx. 4.5"; shaft length. -- Head 7: Left Rotary sanding head, approx 4.5"; shaft length. -- Head 8: Left / Top / Bottom, Rotary sanding head, approx 9"; shaft length. -- Heads 6 and 7 are directly opposing, can be Left and Right , Features: -- Tilt Adjustments: Universal movement of horizontal, vertical and tilt adjustment with wheels #1 - #3 & #4 at approx. +/-75° from vertical top to horizontal, wheel #2 (bottom wheel) with -15° to + 45° from bottom vertical. -- Wheel #5 is universal with a 360° tilt rotation. -- Heads 4 - 8 have automatic wear compensation. -- Position & degree adjustments dovetail slides by hand wheel with digital indicators.Complete with: -- 8" Wide abrasive belt capacity, belt oscillation on/off, interchangeable profile pads & electronically timed/programmable movement of pad, pneumatic belt tension, pneumatic blowers for cleaning & cooling of belts. -- Main electrical cabinet with controls, PLC controller & manual override with individual buttons, Operator/Parts/PLC manual and elect drawing are included.

MAKOR Model 5-TC Profile Sander(5) Station machine, 7-7/8"" max. width & 3-1/8" thickness capacity. Equipped with: (4) Disc type sanding spindles, each with 4 HP direct motor drive, 6" spindle length, tilting 0 - 90ø and adjustable up & down on dovetail slides, automatic wear compensation; (1) top mounted abrasive belt sanding unit, for 7-7/8" wide belts. 30 - 150 FPM variable feed speed with (3) small 6" wide x 20" long conveyor belts placed between the sanding heads, with a common feed drive; adjustable overhead holddown wheels between the heads. All heads, wheels, and the feed belt are functioning as they should. Seller is including a large collection of spare sanding heads, wheels, and specialized tooling. These spares alone save you thousands in future maintenance and setup costs.This Heavy-Duty Industrial Profile Sander is designed for High-Speed Sanding/Denibbing of Profiles, Mouldings, and Trim, and is currently hooked up and fully operational (not sitting in a warehouse gathering dust). Buyers are welcome to schedule an Inspection and see it under power before your purchase.

MARATHON - Gemini : Horizontal Closed Door Baler (Full Pen) Specifications: -- Bale size: 30" x 48" x 60". -- Charge box: 35" x 60". -- Cylinder: Dual 6". -- Main motor: 20 HP.

MARATHON 604242-830 CLOSED DOOR HORIZONTAL BALER With Infeed Conveyor -- 8" Cylinder -- 30 HP Motor -- Feed Opening 60" x 42" -- Loaded on your Truck -- Infeed conveyor 48" x 31' - Can be sold separately for $14,950

MARATHON SE-503042-830 Side Eject Closed Door BalerSpecifications: -- Side eject type. -- 30 HP motor. -- Feed opening 50" x 28". -- Bale 30" X 42" X 72". -- Shipping weight 15,200 lbs.. -- LOADED ON YOUR TRUCK

MARATHON RJ-450 Stationary CompactorSpecifications: -- (4) Cubic Yard compactor. -- 15 HP motor. -- 6" Cylinder. -- Clear top opening 67.5" x 60". -- Left Side Loading Hopper. -- Driver Jog Control Station. -- Unit has been taken out of service for 2 years and stored inside.

MARATHON- PC115-44-30: Auto Tie Horizontal BalerSpecifications -- Cylinder: 8". -- Tension cylinder: 9". -- Feed opening: 28" x 44". -- Main motor: 30 HP. -- Loaded onto your truck!Was running when taken out of service.

MAREN 72/48-312 CLOSED DOOR HORIZONTAL BALER Specifications: -- 20 HP motor -- Feed opening 42" x 30" -- 7" Cylinder -- Bale size 72" x 42" x 42" --The Maren 72-48/312 Closed Door Horizontal Baler is a reliable piece of equipment suitable for various recycling and trash management applications. It features a robust 20HP power unit operating at 240V, which ensures efficient processing of materials. The baler is equipped with a 7-inch cylinder, providing substantial compaction force for effective baling.

MAREN SWSS-A-8-AT-60R Wide Body AT Horizontal Closed Door Baler -- YMFG: 2008. -- 60 HP - 575 Volt. -- 8" Cylinder. -- 60" x 45" Feed opening. -- 45" W x 30" H x Variable length. -- Operational pressure 2,700 psi. -- Platen force 135,000 lbs. -- Air Oil Cooler. -- 10' L Bale out table. -- Conveyor, Chutes and Ladder not included (JUST BALER)Machine currently in operation and will be available to load mid-November 2026

MARINUS - Promax: End Matcher with Defecting, Cut to Length, & Optimizing Cutoff CapabilitiesFeatures & Specifications -- Heavy and stable construction. -- Cutterhead carriage and Clamp System utilizes: HD Lineal bearings; grease lubricated. -- Heavy-Duty, low maintenance Feed Chains into machine: Takeaway of material after cutting/end matching. -- Continuous high-speed feeding system with: Accurate positioning utilizing HD Servo Drives. -- (2) Servo Motors for: Max. feed control and acceleration & deceleration control. -- Servo driven feed motor & gearbox for: Highest efficiency speed feeding & control of the cutterhead carriage. Includes: Independent stepless speed control forward & reverse. -- Pneumatic side pushers (holding material firmly against the fence) for: Guaranteed square angle cut. -- (2) Cutoff sawing Servo motors: 5 HP Each (3.0 kW) – 450 mm (17.7";) dia. blades with: Inverters (VDFs) for varying blade speed. -- (2) High-speed milling head Servo motors with Inverter (VFD): 12 HP - 7.5 kW Each; speeds to 12,000 RPM; 5"; (125 mm) dia. -- Adjustable cutterhead stroke based on material width to increase throughput speed based on the width of material input. -- (1) Luminescence sensor camera for defect crayon mark. -- Inductive Sensors: For detecting the position of the carriage and others for detecting the positions of the saw blades. -- Cutoff waste powered belt conveyor in machine (below feed system; 12"; from floor) with: Drive motor for waste cutoff pieces taken to the outfeed end of the machine. Other Technical Specification -- Machine with: Completely enclosed by safety doors; produced to CE Safety & Electrical Standards to UL/CSA Standards. -- LENZE PLC Control. -- Operation from Operator Control with: Touchscreen control; mounted on the front right cover of the machine. -- Air pressure required: 85 PSI (6 Bare). -- 1" x 8"; (200 mm) & 2 x 4-3/4"; (120 mm) Dia. dust outlets; approx. 5,000 - 5,500 mm and from 3,050 - 3,350 CFM. -- Router Remote Access with: Internet connection; factory can monitor the performance of your machine. - Also allows for easy access to service, softwareupdates, & downloads.Input & Output Material Specifications -- Board widths: 2"; (50 mm) Min. to 12.28"; (312 mm) max.; min. width: 1-3/4"; (44.5 mm) min. -- Board input lengths: 17.9"; (450 mm) min. to 20 ft. (6,000 mm) max. -- Board output lengths: 15-3/4"; (400 mm) min. -- An available short piece option can be added to reduce output; length to 10"; (250 mm) min. -- Board widths: 2"; (50 mm) Min. to 12" (300 mm) max. -- Board input lengths: 17.9"; (450 mm) Min. to 20 ft. (6,000 mm) max. -- Board thickness: Min. to 0.315"; (8 mm) on request to 1 1/3"; (32 mm).Standard Programs / Programming -- Machine is equipped with: (2) Primary Programs. 1. End matching: Trimming ends and end matching. 2. Cutting only (no end matching). -- (3) Subprograms 1. Defecting cutting & end matching: Operator marks defects with a crayon; machines cut out

--In auction: https://exfactoryauctions.com/Detail/SH-230492/event/A122024$1 --NO RESERVE!-- MARTIN T 23 Tilting Spindle Shaper, with 30 mm (1.18") Interchangeable Spindle & Power Feeder Specifications: Table size 940 x 1100 x 850 mm (37.01” x 43.31” x 33.46”) H, with Table insert dia. 90, 130, 205, 305, & 480 (3.54”, 5.12", 8.07”, 12.01”, & 18.90”). Spindle tilt 0° to 45°. Maximum capacity under nut 7". Vertical spindle adjustment 145 mm (5.71"). Spindle speeds 3000, 4,500, 6,000, & 90,000 RPM. Equipped with: 6.4/7.8 HP Motor. "MK5" Spindle shaft. Mechanical spindle brake, with Foot pedal. Hand spindle lock. Complete with: 11-1/2” x 4-3/4” Left & Right Fences, with 21” x 6” H Left & Right Wood fences. 1996 CO-MATIC 1 HP 4-Speed 4-Roll Power Feeder, with Speeds 13, 26, 26, & 72 FPM. Dimensions with Power Feeder: 42" x 42" x 63” H.

MARTIN - SHM-08622: Shaper -- Specifications7.5 HP - 3,450 RPM Motor.1-1/4" Dia. spindle.8" Max. cap. under nut. -- 42" x 37" Solid cast iron precision ground Table; ribbed construction. -- NOTE: Machine runs great; however, we do not have the micro adjustment fence.

MARTIN T71 10' Sliding Table SawSpecifications: -- 10' Cutting cap.; 9-1/2' sliding table, 3-position table locking mechanism; cast iron machine table; 7.5 HP motor; tilting saw arbor (arbor speed 2,800 - 4,000 & 5,500 RPM) with tilting from 0° - 45.5°, 450 mm (17.72") saw blade cap.; 1 HP - 9,400 RPM scoring motor. -- Max. cutting height: 5-11/16"; Hydraulic saw blade height & tilt adjustment by foot pedal control; cutting width between saw blade & rip fence: 49". -- Complete with: -- Rip fence with micro-adjust; crosscut fence flip stops.

MARUNAKA Model RD – 8J WIDE Single Deck Veneer Roll Dryer;Complete with the following features: -- 1988 - year of manufacture. --Working width – 51"; --Length of the dryer – 24 Ft (4 Sections) --Type of heating - Steam --Operational in 2018 when mill closed --Professional rigging and loading available.

MARUNAKA Model RD-3UB/RD-6UB (Connected) Single Deck Veneer Roll Dryer;Complete with the following features: -- (3) 3 HP circulating fans with (1) 3 HP exhaust blower thru the ceiling. -- Optional heat source: electric (7) Elements/Zones, computer controlled thermocouples in addition to (2) Natural gas burners (OEM).. Both dryers have a 100amp circuit breaker with 100amp fuses. The RD 8 operates with 4 fan motors and 4 heaters. The RD 6 has 3 fan motors and 3 heaters";.. -- Capable of temperatures to 120° Celsius (250° Fahrenheit). -- Working width 1000 mm or about 39 inches. Veneer is fed endo.Please Note: -- Dryer is (2) separate units; all equipment will fit into a 40' container for shipment from Eastern USA. -- All equipment is in good working condition including all fans and blower, temperature control works properly; feed roll drive works well. -- Rolls have been nickel treated to minimize corrosion/oxidation. -- This dryer equipment is still in place. -- MARUNAKA (2) Models: RD-3UB and RD-6UB currently connected to increase capacity. Can easily be separated.NOTE: Refurbished in 2005, operated from 2005 - 2012. Still operational ready to work!

MARUNAKA - SL-250V: Inline SlicerSpecifications9.8" Max. slicing width at a 75° knife angle; maxi. veneer thickness: 1/10"; knife bias angle: 75° to 85°; upper feed beam continuous belt feed; (2) feed speeds: 141 or 198 FPM; 15 HP feed motor.Complete with: Motorized upper feed beam that adjusts automatically during slicing at Cant changes; fine handwheel adjustment of front bed longitudinally or vertically; knife size: 47.2" long x 7.3" wide x 0.80" thick.Machine comes with: (3) Knives.NOTE: No merry-go-round included.