CEFLA ROCTRE D Automatic Spray Finishing Machine: for HIGH VOLUME PRODUCTIONThickness: Max. 50 mm (2"); Min. 5 mm (0.2").Maximum Line speed: 20 MPM (65 FMP).Equipment Specifications:CEFLA, model ROC 3 D. Is a Two Arm reciprocating Spray Machine: -- Parts are fed under the Part Reading Bar to measure size and spray parameters on a continuous CFB belt conveying system. -- Lacquer recovery and belt cleaning are accomplished by means of a "cleaning trolley" located under the exist end feed belt. Made up of counter-rotating rollers with scraper and belt cleaning unit, with 3 rollers and stainless-steel troughs: all the rollers are fitted on the motorized trolley longitudinally removable by hand pulling of trolley out. -- Powered outfeed tilt able belt lifts to approach the cleaning trolley. -- (2) Oscillating arms equipped to accept a maximum of (8) guns, four per arm and driven by a Brushless servo motor.There are (2) Separate lacquer feeding circuits with recycling system. -- This is a fully pressurized spray cabin with an exhaust air filtering system for overspray using double dry filters set, primary filter and secondary . -- Electronic control cabinet to monitor spraying functions.Booth consists of sandwich paneling and air is pushed in through (2) air intake ducts (positioned between guns) above the slanted perforated top panels made up of fine filter material help to reduce turbulence. parts running through the sprayer can be viewed by means of a large front viewing window/access panel which can be lifted to access the guns and interior of the sprayer. Note: EX-FACTORY’s Logistic Department is experienced and set up to provide “Full Service Logistic"; from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.

CEFLA ROCTRE D Automatic Spray Finishing Machine for HIGH VOLUME PRODUCTION and includes (2) two integrated cleaning trolleysThickness: Max. 50 mm (2"); Min. 5 mm (0.2").Maximum Line speed: 20 MPM (65 FMP).Equipment Specifications:CEFLA, model ROC 3 D. Is a Two-arm reciprocating Spray Machine: -- Parts are fed under the Part Reading Bar to measure size and spray parameters on a continuous CFB belt conveying system. -- Lacquer recovery and belt cleaning are accomplished by means of a "cleaning trolley" located under the existing end feed belt. Made up of counter-rotating rollers with scraper and belt cleaning unit, with (3) rollers and stainless-steel troughs: all the rollers are fitted on the motorized trolley longitudinally removable by hand pulling of trolley out. -- Powered outfeed tilt-able belt lifts to approach the cleaning trolley. -- (2) Oscillating arms equipped to accept a maximum of (8) guns, four per arm, and driven by a Brushless servo motor.There are (2) Separate lacquer feeding circuits with recycling system. -- This is a fully pressurized spray cabin with an exhaust air filtering system for overspray using a double dry filter set, primary filter, and secondary. -- Electronic control cabinet to monitor spraying functions.The booth consists of sandwich paneling, and air is pushed in through (2) air intake ducts (positioned between guns) above the slanted perforated top panels made of fine filter material, which help to reduce turbulence. Parts running through the sprayer can be viewed by means of a large front viewing window/access panel, which can be lifted to access the guns and interior of the sprayer. Photos show equipment while it was still in service - currently being reconditioned.Note: EX-FACTORY’s Logistics Department is experienced and set up to provide “Full Service Logistics"; from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door).

CEFLA - EASY 2000 D: Finish SystemCEFLA - Easy 2000: Reciprocating Spray Machine. 2-Arm dry filter Reciprocating Spray Machine with: (3) Independent paint circuits; allows several different coatings to all applied using the same machine with reasonably quick-change over. Parts are electronically scanned as they enter the spray cabin: To lower waste & increase spraying efficiency.Spray guns are: All electronically controlled at the "Easy lCD" interface panel.Spray Cabin. Setup with the CEFLA Recovery System. Means: No paper belt to change maintaining a "Clean" feed belt. The positively pressurized cabin helps both: Control dust & direct overspray down into the dry paper filters. Machine: Completely reconditioned with many new parts including: All belts. Air & Fluid lines. Pumps for the cleaning trolley. Filters. Wear parts.

The CEFLA Belt Handling Type TNS 4500/A is an industrial vacuum belt conveyor designed to transport, stabilize and accurately position wood panels and furniture components throughout automated finishing lines. The machine utilizes a perforated conveyor belt combined with an integrated vacuum chamber and centrifugal blower to generate continuous negative pressure, securely holding workpieces against the belt during transport. This vacuum retention system prevents movement, vibration and misalignment while components pass through sanding, painting, drying and curing operations, ensuring consistent product positioning and superior finishing quality. The conveyor operates in synchronization with adjacent production equipment through PLC control, improving production flow, minimizing manual handling and increasing the overall efficiency, reliability and safety of industrial woodfinishing operations.Machine Type: Vacuum Belt Conveyor (Belt Conveyor with Suction)• Model: TNS 4500/A• Manufacturer: Cefla Finishing• Machine Function: Automatic conveying and positioning of workpieces through finishing lines• Conveyor Type: Continuous vacuum belt conveyor• Conveyor Length: 4,500 mm• Maximum Working Width: Up to 1,300 mm• Conveyor Belt: Wear-resistant perforated conveyor belt• Vacuum Holding System: Integrated suction chamber beneath the conveyor belt• Vacuum Generation: Integrated centrifugal blower for negative pressure generation• Suction System: Continuous vacuum retention for workpiece stabilization during transport• Drive System: Geared electric motor with variable frequency drive (VFD)• Conveyor Speed: Variable, electronically synchronized with production line equipment• Control System: PLC integrated with upstream and downstream finishing equipment (NOT INCLUDED IF PURCHASED SEPARATE OF THE LINE)• Workpiece Detection: Photoelectric sensors for automatic panel detection• Machine Frame: Heavy-duty welded steel construction• Adjustable Leveling Feet• Electrical Supply: 400–480 V, 3 Phase, 50/60 Hz• Approximate Dimensions: 4.50 × 1.60 × 0.95 m• Approximate Weight: 900–1,100 kg

VERY LOW HOUR MACHINE; power on 760 hours, running 554 hoursThe CEFLA MITO 2P is an automatic industrial spraying machine used to uniformly apply paints, sealers, stains, and coatings to wood panels, doors, and components in industrial manufacturing processes. -- The machine uses two oscillating arms with automatic spray guns and a photoelectric scanning system that detects each workpiece's dimensions and position to optimize application and minimize waste. Its continuous conveyor system and electronic controls ensure consistent finish quality, high productivity, and production repeatability. -- Additionally, it incorporates filtration and overspray extraction systems that enhance process efficiency and contribute to achieving high-quality surface finishes on components destined for the subsequent assembly and finishing of furniture and wood structuresMachine type: Oscillating automatic spray painting machine• Model: CEFLA MITO 2P• Manufacturer: Cefla Finishing• Application type: Water-based paints, solvent-based paints, and industrial adhesives• Spraying system: 2 automatic oscillating arms (2P)• Typical configuration: 2 arms with 4 guns per arm• Total number of guns: Up to 8 automatic guns• Effective working width: 1300 mm• Maximum workpiece thickness: 60 – 80 mm• Minimum workpiece length: 250 mm• Variable feed speed: 1 – 6 m/Min• Maximum oscillating arm speed: Up to 140 m/Min• Maximum oscillation frequency: 55 cycles/Min• High-precision photoelectric barrier scanning system• Automatic spray optimization system• Paper conveyor belt with vacuum system• Patented Airsphere Plenum system for airflow control• Overspray filtration via dual-stage dry filters• Automatic color and product change system• 12.1"; color touchscreen• Industrial PLC control• Ethernet and USB connectivity• Installed power: 15.5 kW• Compressed air consumption: 5 Nl/min• Extraction airflow: 10,000 m³/h• Power supply: 480V three-phase• Approximate dimensions: 3.66 × 3.78 × 2.40 m• Approximate weight: 2,270 kg

CEFLA/FALCONI KLEENSPRAY 12 Reciprocating Spray System; -- The "Kleenspray 12" Reciprocating Automatic Spraying system is mainly based on the use of a closed continuous CFB belt conveying the panels to & through the spray area. The design features many advanced mechanical solutions that provide significant advantages. --Technical Features: -- Fully pressurized spray cabin, "Paper Belt Overspray Capturing" lacquer system; microprocessor unit for spraying operation control. -- 5-Edge coating, 51" max. width, 76" long spray enclosure. -- Gun Carrier: Reciprocating-type linear Gun Carrier with (4) guns; includes (1) station with "(4) guns, stainless steel material handling pumps", clamps & brackets for free height and angle settings. -- Supporting trolleys driven by toothed timing belts with brushless motor with electronic control, reciprocating slider, automatic reversal of gun angle on each stroke to cover panel edges, with variable speed; (3) lacquer feeding circuits. -- Light barrier gun control: Photo cell sensors send material size to the programmable controller, which opens and closes the guns. -- Conveyor System: "Paper Roll" continuous collection belt with roll-up collection paper area, with long-life and easily removable infeed roller section, with electronic reading barrier consisting of (60) photo diodes and outfeed roller. -- Booth Enclosure: Made of sandwich paneling with glazed elements; port for access to the spray gun units. -- The machine is particularly suitable for solvent-based and/or waterborne drying lacquers.

CEHISA PRO-12 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Features: Pre-Milling Station with:2 x 1.5 Kw (2.0 HP) 12,000 RPM motors, standard equipped with diamond cutters. Both spindles pneumatically controlled. -- Spray agent unit for top and bottom with (2) sprayer and (2) reservoir -- Automatic Edge Magazine: For coiled material up to 3 mm thickness, strip feed magazine for up to 5 mm (3/16") solid wood banding. -- Quick Melt Glue System, MR-5:10 - 15 min. heat-up time, auto temperature drop. Glue Tank is coated with nonstick material, quick-change mechanism for easy maintenance and/or color change. -- Pressure Section:(1) Large dia. driven and (2) idle rollers. Digital read-out and pneumatic positioning selectable from controller touch screen.Edgebanding Workstations: -- End Trimming Station, V-7: Double motor front & rear, 2 x 0.35 Kw (0.5 HP) - 12,000 RPM. -- Edge Trimming Station, BC-5: Top & bottom flush/bevel/radius trimming, 2 x 0.55 Kw (0.75 HP) - 12,000 RPM, tiltable 0° - 10°, pneumatic exclusion from operator panel. -- Corner Rounding Unit, FD-50: To process overhanging edges and trimming around the leading & trailing edge, 1 x 0.27 Kw (0.36 HP). -- Profile Scraping Unit, R-8: For thick PVC/ABS radius scraping, pneumatic in/out positioning from control panel with chip collection box. -- Flat Glue Scraper, RR-7: To remove potential glue squeeze-out. -- Buffing Unit, PC-9: with spry mist unit top/bottom Top/Bottom, 2 x 0.12 Kw (1/8 HP) - 1,650 RPM motors, tilting horizontally and vertically. -- Operator Interface:PLC Microprocessor control with color touch screen, memory up to 20 programs.Equipped With:Feed Speed, 9 - 14 MPM (29' to 45 FPM), -- Power hold-down beam, work-piece support outrigger, safety & sound enclosure. Included Options:Riepe, non-stick spray system. -- Nesting Tracer Shoes for top/bottom trimmers

CEMCO - UF-37-1-103: Single Head Wide Belt SanderSingle head Wide Belt Sander with: 36" Wide capacity; combination head with 6-1/8" diameter contact roll & independently adjustable platen. Equipped with: -- 30 HP Main motor; 1 HP variable speed conveyor feed: 30 to 50 FPM; 1.5 HP power raising & lowering Conveyor bed motor with: Handwheel fine adjustment. -- 37" x 103" Abrasive belt size. -- Electric eye tracking. -- Single infeed & outfeed holddown rolls; antikickback finger devise on the infeed of the Sander. -- Includes: Load meter; disc brake on sanding head; magnetic controls.Recently replaced: Conveyor belt; contact sanding roll; bearings.OVER BUILT for heavy loads. Great Sander for SLAB material.No longer required for ongoing operations.

DUST-EX AG22 Abort Gate/Valve.... Automated two-way air stream diverter valve which prevents fires and explosions in dust collection systems and reduces the risk of fire in explosive prone work environments. A "safety measure essential" when clean air is returned to a building. -- Consists of: A lever arm that automatically directs a flapper damper in two different directions. -- Normal Position: The damper stays in a horizontal position (open) allowing the air stream to be directed/returned to the building -- Abort Mode: In the event of a spark originating upstream of an outside dust collector, a Spark Detection Sensor positioned in the air stream inside the building, sends a signal to de-energize an electro-magnetically controlled latch.The flap of the valve is very quickly switched to the abort/second position (closed) thereby diverting the explosion pressure/air stream to the atmosphere. Thus the inside work environment is protected from the explosion. -- Reset Mode: A pneumatically operated system is added to reset the damper position. -- Comes With: NEMA enclosure, 10" x 10" x 6". Enclosure for Pneumatics 22" x 22" -- All (3) flanged connections are 22" x 22'" square. Note for the clean air return a 24"x24" is suggested , to keep the flow down. -- Construction: Damper assembly is fully bolted to provide solid, reliable operation. -- The power adapter for the independent power supply is extra. -- Overall dimensions: 60" long x 36" wide x 43" high. -- NFPA Certified.MANY SIZES AVAILABLE. PLEASE INQUIRE!Improve the safety of your work environment & help comply with NFPA codes!

DUST-EX HSAG-24 Packaged Safety Solution for a 22"x22" (24" dia. round equivalent) Return Air Rated for 10,000 CFM. System for mitigating fire and explosions in combustible dust environments, for the woodworking industries. Generally includes Abort Gate, Non -Return Valve and Spark Detection/Suppression Hardware and Controls as follows: -- 1.) VigiFlap Dust Sensor, Dirty Air 22": Sensor, dust level, adjustable capacitive for organic dust, requires intrinsic safety system (will not trigger combustion or ignition in gasses or fuels). -- 2.) VigiFlap Explosion Isolation Flap Valve (Non-Return) Valve, EV-VF22 (EPDM); 22" diameter, flanged inlet and outlet, locking mechanism; welded steel construction, safety red painted finish, domed flap (stainless steel), inspection/access door, EPDM gasket, grounding straps, inductive shutdown sensor, normally open or closed flap orientation, certified ATEX EN 16447, NFPA 69 compliant. -- 3,) Control Panel. One-Zone CP05 Control Panel 1 inlet, 1 outlet: UL698A Control Panel for use with NFPA 69 compliant Explosion Isolation Valves. Standard panel includes status lights, intrinsically safe circuit (1 Per Zone), monitored inputs (3 total), ability to add a secondary clean air isolation valve, output for system shut down and monitoring, drawings, installation instructions, NEMA 4 outdoor rated enclosure, UL and Canada UL listings. Allows for 120VAC or 24VDC input power. -- 4,) SPARK DETECTION & EXTINGUISHING, SINGLE ZONE, KIT for pipe sizes 20?- 40? diameters; includes Raptor Spark RS-CUSP1L Control Panel, (2) Spark Detectors, Extinguishing Kit, Flexible hoses, Audible Alarm & Warning Light. Single zone spark detection and extinguishing kit for duct sizes of ?20" - 39" diameter, RS-KIT02, includes Raptor Spark RS-CUSP1L control panel, (1) RS-PDK02 packaged detector kit with (2) spark detectors with mounting kits, (1) RS-PWE02 water extinguishing assembly with hose connections and spray nozzles, audible alarm, warning light, battery back up - ATEX certified, CE listed, FM approved. -- 5.) Packaged External Test Lamp Kit, RS-TLK02, duct sizes: 6" - 39" diameter, (2) RS-SD02 test lamps with (2) RS-MK02SD/TL mounting kits - IP 65 enclosure, ATEX certified, CE listed, FM approved. -- 6.) Optional Start up Service Assistance: a.) Start Up - Day Rate @ $1,750/day. b.) Travel Service: Day Rate @ $900/day. c.) Travel Expenses: Total $110/hr. - min. two hrs. required - total $220. c.) Start Up Service Hourly Rate is $160/hr. Min. (4) hrs. needed for a total $640. -- 7.) High Speed Abort Gate, EM-HSAG02-24, magnetic (24 VDC), 22" x 22" flanged inlet and outlet (24" round equivalent), control panel for, magnet power with status lights and manual test button, gate position verification monitoring, manual reset lever, weather hood with bird screen. Maximum volume and velocity: 10,000 CFM / 3000 FPM, clean air installations only, NFPA compliant when installed with listed spark detection system. -- 8.) Packaged dust probe

DV SYSTEMS C10TD 10 HP Rotary Screw Compressor w/Tank & Dryer; 39 CFM @ 145 PSIG.Equipped with: -- Fixed-Speed, Direct Drive 10 HP motor; ideal for continuous-use applications with constant compressed air demand. Efficient power transmission provides maximum flexibility in pressure selection. -- Integrated Oil & Air Cooler contributes to the production of low discharge air temperatures, reducing energy consumption, promoting system reliability & extending air-receiver life. -- Features: -- CSC300 Controller effectively manages, monitors and maintains optimal operational parameters to ensure stable system pressure and reliable operation. -- Innovative component integration results in a compact, quiet air system engineered for efficiency & performance, providing high-capacity air delivery and stable system pressure with minimal installation space. -- Includes: -- A Microprocessor controlled AsD40 (10HP) ProDry™ Refrigerated Air Dryer with stainless steel separator & Auto Drain; Heavy-Duty Aluminum Pre-Filter Housing with a 1-Micron Filter element; 120 Gallon Air Receiver - Built to AsMe Codes & CRN Registered.

DYNAPAC - CA1500D: Smooth Drum CompactorSpecifications -- Smooth drum: 66". -- Engine: 55 kW - 75 HP @ 2,200 RPM. -- Operating mass (incl. ROPS): 15,500 Lbs. -- Operating mass (incl. Cab) 15,900 Lbs. -- Module mass (front/rear): 7,750 Lbs / 7,750 Lbs. -- Max. operating mass: 18,700 Lbs. -- Fuel tank capacity: 50 Gal. -- Speed range: 8 / 12 / 12 kM/Hr.Equipped with: -- Seismic. -- Hydrostatic hydraulic systems.

EARTH CARE PRODUCTS, INC. "DB-1030" (10.5 Ft. x 32 Ft.) TRIPLE-PASS DRYING SYSTEM, W/GAS BURNER:Complete with the following major components: -- 10.5 Ft. x 32 Ft. (despite the model DB-1030) Triple-pass Insulated drum. -- Trunnion Bases, and 30 HP Drum Drive. -- High efficiency Cyclone, Cyclone outlet Airlock. -- 100 HP Dryer Main Fan, and Ducting. -- 25 MM BTU Gas Burner complete with Refractory Lined Furnace and Gas Train. Notes: The Trunnion Tracks and Trunnion Wheels are in good condition as is the drum interior. The system was renovated in 2015 and not used much after the work was done. The equipment is still in-place.

ECC SR 206 AUGER VALVE BAGGERGross Weighing Auger Valve Bagger with Air Actuated Bag Clamp, Manual Bag Chair, Mechanical Scale Weighing, Mild Steel ConstructionSpecifications: -- 5 HP TEFC Motor -- Nema 12 Electrical Controls, with Forward and Reversing Starter. -- Scale Beam Weighing (mechanical weighing), Weight range 20 Lbs to 110 Lbs -- Filling Spout as per Specification (Recommend 3" OD for 5-1/4"+ Valve Bag) -- Manual Chair -- V-Hopper for Free Flowing Products. -- Loaded on your truckOptions Available ( not included in selling price) -- Electronic Weighing -- Spike Agitator in Primary Hopper -- 304SS Contacting Surfaces -- Loaded on your truck

VALVE BAGGER ECC 770MODEL 770 FORCE FLOW PACKER: -- Pressurematic Gross weighing air actuated valve bagger with positive air pneumatic circuit, air operated pinch tube cutoff, manual bag chair, mild steel construction.STANDARD SPECIFICATIONS: -- Manual start switch, 12″ butterfly valve, and actuator, Dust collection connection, Scale beam weighing, 3-way separate exhaust, Filling spout as per your bag specifications, 8″ x 12″ sight glass in the upper chamber.AVAILABLE OPTIONS, PRICE QUOTED ON REQUEST; -- (1) Low-pressure air pump assembly, consisting of 5 HP motor and "Roots 36" rotary pump, complete with inlet filter silencer and discharge silencer, pressure weighted relief valve. 197 CFM @ 6 PSIG maximum air requirements. Does not include a starter. Uses 3-phase power. -- (1) Electronic weighing, with Rice Lake 920i digital controller, 500# “S"; load cell. -- (1) Bulk and dribble cylinder, interfaced to electronic weighing controller. -- (1) Power discharge chair, for use with a conveyor. -- (1) 304ss Contacting surfaces.

EKSTROM CARLSON - Model EE, ...Straight Line Rip SawSpecifications: -- 30 HP Saw arbor motor. -- Max. thickness 4-1/2"; with 16"; dia. saw blade (no blade). -- 5 HP Feed Motor with feed rates infinitely variable to 250 FPM. -- (3) Lower infeed rollers are chain driven and are adjustable from 0° - 5°. -- Elongated pressure bar housing assures the proper guidance across the entire table length.Equipped with & Features: -- Spring-loaded rollers with 1 in. yield. -- Dual position and lubrication system; (2) outfeed rollers. -- Please note: Chain appears to be in very good condition. -- 3 extra blades

EKSTROM-CARLSON E/EE 16" Dip Chain Straight Line Rip SawSpecifications: -- Table size 66" x 80" x 34-1/4" H. -- Min. stock length: 14-1/4" under (2) rolls & 19-1/4" under (3) rolls. -- Max. depth of cut 3-1/4". -- Max. blade dia. 16". -- Arbor dia. 2". -- Variable speed feeds 0 - 250 FPM.Equipped with: -- 30 HP Direct drive blade motor. -- Pyramid corrugated feed chain, with 3 HP Motor. -- Infeed fence. -- Automatic chain lubrication.

EKSTROM / CARLSON - 18, ...Pump Sander Pump Sander with: (2) 1" Dia. horizontal spindle; 2 HP - 1,200 RPM enclosed motor; mounted on heavy cast iron pedestal. -- Complete with: Push button magnetic controls & starter; 4" dust collection port.

ELIO VALERI ELVAP 120 Copy Lathe. -- General data: 48" max. length cap., 7" max. dia. without steady rest, 3.93" max. dia. with steady rest, and up to 2.5" x 2.5" dia. with steady rest for square pieces; 0 - 39 FPM forward and 0 - 52 FPM return speed, 5.5 HP motor, 1,300 - 3,500 - 5,000 RPM; -- Features: Air/oil feed and copier, chain head stock drive, gate loading, pattern; pneumatic tail stock, automatic pneumatic control program.

EMC GIANT 1350 2WR Abrasive Planer with (2) Heads, Planer Head and RollerTop of the line Heavy Duty Abrasive Planer from EMC. The series of GIANT machines are available in many configurations. Abrasive Planer has a helicoidal head with insert tooling.Useful working width 1,350 mm (53"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").Head configuration: 1st Head: Planer Head "W" -- Cutter head knifes diameter 180 mm. -- Shaft for helicoidal position knifes with (512) Interchangeable knifes with 4 cutting edges, 14 x 14 x 2 mm. -- Sectioned pressure bars in 24 independent segments. -- Anti kickback protection made of 72 independent elements. -- On-Off pneumatic cylinder for planer group in working position. Working pressure adjustment. Motor power 30 kW (40 HP), Star-delta starterSpeed rotation: 35 m/Sec (115 FPS).2nd Head: Roller "R" Belts dimensions: 3,250 x 1,370 mm (128" x 54"). -- Roller diameter: 320 mm (12-5/8"). -- Roller rubber hardness 45 Shore. Constant control to any position with accuracy 0.02 mm. -- On-Off pneumatic piston, controlled from the electrical panel. -- Rotation: Against feed (clockwise). -- Motor power: 22 kW (30 HP) Automatic star-delta starter. Rotating cutting speed: 21 m/Sec (99 FPS). Blower for the roller unit.Feed system: -- Constant pass line, 900 mm (35.4") from floor (In line machine). -- Vacuum bed, 4 kW (5,5 HP) for hold down of smaller parts, mounted inside of the machine base. -- Idle table rollers support in infeed and outfeed. -- Rubber covered presser rollers, grooved. -- Variable feed belt speed, adjustable from 3 to 20 m/Min (9.8 - 65.6 FPM). Inverter Controlled. -- Large diameter screws on machined guides with columns and pistons. -- Automatic feed belt centering device.General Machine Features: -- Independent main motors. -- Analog ammeters, for each motor, on main control cabinet. -- Electronic motorized grit set system, control from touch screen for each working group.Electronic programmable color TOUCH SCREEN display, 7" widePLC with micro-processor of latest generation, modular and expandableConnection USB, RS232, Ethernet 10/100/1000Memory capacity: 100 working programs or moreGraphic synoptic to facilitate programmingSoftware facilities: -- Automatic motor sequence starting. -- Command, programming and display for all electronic pad functions. -- Command, programming and display for thickness. -- Command, programming and display for feeding. -- Command, programming and display for all inverters. -- Command, programming and display for selected groups. -- Command, programming and display for blowers, including compressed air saving function. -- Display report and reset of alarms (self diagnostic) with memory records.Options Included: -- Vacuum bed, 4 kW (5,5 HP) for hold down of smaller parts, mounted inside of the machine base. -- Rotating blowers for part and feed belt cleaning. -- LED light inside the machine. -- Telemetry for remote computer assistance