NEDERMAN S-750 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump Bin

NEDERMAN S-1000 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Includes: -- Auto Bag ShakerAvailable in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 45 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-750 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderIncludes: -- Auto Bag ShakerAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump BinAvailable spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN - NFSZ 3000-2: Modular Filter with Two Modules, Variable Frequency Drive & Rotary Air Lock Waste Discharge 12,000 CFM Approx. @ 6.56 to 1 air-to-cloth ratio; negative pressure; expandable Heavy-Duty Baghouse Dust Collector System.Designed for: Small to medium-sized air flows with large material concentration (dust loading).Specifications -- Total 1,830 sq./ft. (170 sq./m) of filter area; total of (100) filter bags. - Each module contains: (50) Filter bags @ 915 sq./ft. filter area per module. -- Consists of (2) Filter module sections with: Combined explosion & access door in each section; each with: 2 HP Regenerative Fans for cleaning of filter media. -- Unit is ATEX rated. Hopper for collected material to Rotary Air Lock (RAL) discharging into a waste bin (bin not included). -- Equipped with: (1) Ground-mounted 50 HP - 1,800 RPM TEFC direct drive motor with: VAGON Variable Frequency Drive & NEDERMAN "R56-500-0" Blower Package with: 20" Inlet pipe to fan inlet box.Filter housings are under negative pressure and fan is mounted on the clean air side. -- Fan Capable of approx. 14,600 CFM; motor & fan are a common steel base/frame with ground level installation. -- Features & Includes: Variable Speed motor drive; includes: Certificate of Conformity for Components (USDecla034US-B); Support Stand. -- Complete with: (2) Separate electrical panels. - For VFD Drive & Control panel: Remaining starters and controls. Drain with plug: Quick open access doors and inlet flange. -- Includes: Approx. 22" outside pipe filter header to fan inlet; square to round fan discharge adaptor; approx. 10' high support steel structure. -- Baghouse Dimensions are: 94.5 x 94.5" (2400 x 2,400 mm) for the two modules.Height of baghouse shell: Approx. 167" (4,250 mm), not including support legs. -- Actual model: NFSZ 3000 2HJ

NEDERMAN - DANTHERM NFK3000 8+2 Filter Dust Collection System. Full-Featured with Return Air, Abort Gate, Non-Return Explosion Valve, Spark Detection, and Rotary Air Lock with Dual Relay Transfer Fan., 40,000 CFM approx Capacity set up @ 6.3 to 1 air-to-cloth ratio, (design dependant). Consistsf of (8) filter modules under positive pressure and (2) entry (dust fallout modules), expandable Heavy Duty Baghouse Dust Collector System. Designed for medium to large-sized air flows with large material concentration (dust loading).Features: Variable Speed motor drive. (2) 32" High Speed Abort Gates and (2) 32" Explosion Isolation Flap Valves CARZ - Nederman. 2-Zone Spark Detection for (2) Process Air Lines to Filter and (2) Return Air Lines.- Zone 1 Spark Detection – 2 x extinguishing sets in 28"; duct to be located a minimum of 23’ from detector set in 40"; duct between fan and dust collector- Zone 2 Spark Detection – 2 x 32"; high speed abort gates to be located in minimum of 10’ from zone 2 detector sets in 40"; duct.Specifications: -- Total approx. 7,320 sq. ft.of filter area, total of (400) filter bags. Each module contains (50) filter bags @ 915 sq. ft. filter area per module). -- Consists of (8) Filter module sections with combined explosion and access door in each section, each with 2 HP regenerative fans for cleaning of filter media. -- Unit is ATEX rated. Hopper for collected material to a NRSZ-10 Rotary Air Lock (RAL) discharging into a Dual Relay System dust transfer with T.40-315 Relay Fan – 20 HP -- Equipped with: (1) Ground-mounted 200 HP - 1800 RPM TEFC direct drive motor with Variable Frequency Drive and NEDERMAN 40" Material Handling Fan package with 40" inlet pipe to fan inlet box. -- Electrical: NFKZ Control Panel. Separate control panel with motor starter for main blowers. -- Complete with: Support stand (separate steel support) is not included. .Drain with plug: quick open access doors, (dual purpose Explosion Relief Doors) and inlet flange; -- Includes: Approx. 40" Trunk line pipe filter header to fan inlet, square to round fan discharge adaptor, and approx. 3' high support steel structure. -- Baghouse dimensions are: 94.5" square (2,400 x 2,400 mm) for each module.Hence approx. shell overall length is 945" (78.75'). Depth is 94.5". Height of baghouse shell is approx. 167" (4,250 mm), not including support legs. -- Actual model is NFK3000-8HJ-2BL

NEW YORK BLOWER Fan - 304AF-40: Centrifugal Blower/Motor; approx. 21,000 CFM @ 30"; SP NEW YORK BLOWER. -- Complete with: 200 HP direct drive motor; 3,565 RPM; 460 Volt; "444TS" frame. -- Backward Inclined; high pressure Airfoil Wheel; NYB "AF-40" Fans: Extend the pressure capabilities of backward inclined fan designs to the higher pressures found in heavy industrial process applications such as: Boiler forced-draft; combustion air; solvent recovery; recirculating air. -- Owner states: This fan is unused. -- Weight: 2,664 Lbs.

NEW YORK BLOWER - 362 PLR: General Purpose Air Handling Fan -- Flat backward inclined blade. General Purpose fans are suited for moist & mildly contaminated air in industrial-plant ventilation, dust collection (clean air side) and process-air, comercial-institutional ventillation applications. -- 50 HP; 1,180 RPM NEMA premium Inverter Capable Motor. -- Rated at 21,600 CFM @ 5" Static Pressure, 1132 RPM,(Max 1360), 23.3 BHP, and air density 0.075 Lbs/cubic foot. Class II. -- 56.9 AMPS @ 460 V; 60 Cy; 3-Phase. -- Size 36 PLR, Wheel dia.,36.5". Outlet area 7.66sq. f ((40.75x 20.5") approx 40" inlet dia. -- 40" x 27" Flanged outlet. -- Dimensions/Weight: 71" L x 70" W x 68" H; Weight: 1,200 Lbs.

NEWMAN/Cameron - KF-24: Dip Chain Gang Rip Saw with CAMERON "34H-M1" Infeed SystemSpecifications -- Saw Arbor: 24" Arbor cap.; 14" max. dia. tooling; 4" max. motorized thickness adjustment;22" min. length for glue joint accuracy; 6" throat. -- 2-13/16" Dia. arbor; 24-1/2" capacity saw sleeve arranged for 3-1/8" dia. bore saw blades; saw blade options: 10" - 14" Dia.; spacers: 4-5/8" dia. includes: (1) Saw sleeve and spacers. -- 75 HP - 3,600 RPM TEFC Direct drive motor; arbor with: Disc brake & load meter; arbor lockout on the access door. Feed & Chain: -- 5 HP Variable feed speed: 20 to 100 FPM with: Jam arbor protection. Dip bed carried on: 5" Pitch hardened Double-V chain; hardened dip cams; extruded structural aluminum feed bed slats with: Replaceable steel-backed rubber insert strips; automatic chain oiler with low level shutoff. -- (2) 4" Dia. air loaded overhead pressure rolls; spring-loaded overhead bed plate; pressure rolls & bed plate unit with motorized adjustment; slide type infeed guide with: Handle block; either side of the guide can be used for a stock engraver. -- Anti-kickback finger system with: (1) Lower & (2) upper on infeed; (1) upper kickback on outfeed. Equipped with & Features: Upper outfeed main dust hood: 7-7/8" Dia. 2,150 CFM Infeed dust hood 4-7/8 dia. (855 CFM). (1) Spare sleeve; (2) setup fixtures; generous array of spacers (see photos).

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6r NEWMAN S-248 24" x 8" Single-Sided Planer Specifications: Planing thickness 1/16” - 8”. Min. stock length 13”, 4” Butted. Infeed & Outfeed table sizes 24" W x 16-3/4” L. Feed speeds 20 - 100 FPM. Equipped with: 4” Dia. 4-straight knife cutterhead. Segmented serrated upper with 2” W Spring-loaded segments & (3) Solid steel lower feed rollers. Chip breaker, with 2” W Reversible spring-loaded segments.

NEWMAN WHITNEY S-282-18 Top & Bottom Planer 18" Wide Fully ReconditionedSpecifications: -- Shortest Stock (not butted) 48" -- Top Head: 40 HP 3,600 RPM Direct Drive -- Bottom Head: 25 HP 3,600 RPM Direct Drive -- 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls -- Infinitely Variable Speed Feed Control from 40 - 150 FPM -- Newman Six-Row "Quiet Cut" Helical Carbide Cutterheads -- Feed Works Consist of Two Pivot Mounted Top Feed Rolls -- Top head Chipbreaker with 3" Sections and Independent Yield of 1-1/2" -- Air Operated Pressure Bar -- Top Head Power Hoist -- Automatic Cut Control -- Anti-Lap Device -- Grinding & Jointing Equipment -- Dust collection required - 6400 CFM total (3545 Top and 2855 Bottom) with 6500 FPM velocity at each portEquipped With & Features: -- Infeed Conveyor is Hydraulic Driven 192" Long X 18" Wide -- Push Button Controls -- Hydraulic Pump Unit 15 HP, -- Cutterhead Grinder and Jointer Included

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.

Newman T-20 MortiserSpeifications -- 0.5 HP Motor, push button magnetic starter, foot treadle operation, with compound tilting table, manual holddown.

NICHOLSON A5A 35" LH Ring-Type log debarker. -- Log diameters: 3.5" Min, 35" Max. Length is unlimited. -- Speed: 206 fpm. -- 100 HP (to be confirmed) ring drive motor. -- Estimated weight 80,000 pounds. -- This debarker has been removed from service. It needs cleaning and general maintenance service.

NORDSON DURABLUE 16 1069743A 16 L Hot Melt Glue UnitSpecifications: -- Tank cap. 16 L (4.23 Gallons). -- Melting rate 27.7 Lbs./Hr. -- Temperature range 100° - 400° F.Complete with: -- Gun. -- Heated Hose. -- Cart.

NORFIELD - 250-M: Strike Router -- Strike Router capacity: 9' Length x 1-5/8" thickness cap.; infinite width; mortising plate & bolt relief in: (1) Continuous operation. -- 1-1/2 HP Router: Processes any strike up to 4-7/8" long, including T-strike. -- Rectangular relief leaves more wood in jamb for greater strength and more professional appearance.

NORFIELD - 5000 + 5100 + 5200 Package: Door Line. - Used NORFIELD Door Line includes: NORFIELD - 5000: Door Machining Center. NORFIELD - 5200: Automated Door Loader. NORFIELD - 5100: Assembly Center.NOTE: The following information/specifications are provided for reference and needs to be verified by Buyer prior to purchase. -- Door capacities: 1-1/2' to 3-1.5' Wide x from 6-1/2' to 7'-0" tall x from 1-3/8" to 1-3/4" thick. Jamb capacities: 2-1/2" to 10-1/2" wide x 6-1/2'" to 7'-0" tall x from 1/2" to 1-1/2" thick. -- For flush, stile, and rail; and louvered doors and: Flat, split, & rabbeted jambs. -- For lock: 2-3/8" & 2-3/4" backsets; hinge mortising for: 3-1/2" x 3-1/2" & 4" x 4" x 5/8" Radius; faceplate router up to: 1-1/4" x 2-3/4"; hinge radius of: 5/8"; hinge pattern adjustable from: 29" - 33" center-to-center. -- Machining cycle: Under (30) seconds. -- Door clamps up: Eliminating changeover for interior & exterior doors. -- Lock drilling from underside of door enables operator to: View exit cut & provide quality control. -- Automatic butt routing system with: Chip breaker for clean mortising. - Automatic changeover: Between 3-1/2" x 3-1/2" & 4" x 4" hinge mortising. -- Automatic lock machining; drills for lock & latch and routes for the faceplate in: (1) Cycle; centrally located electrical panel provide: Safe & easy operation. -- Automatic changeover for: Interior & exterior doors; eliminates adjustment time. -- Microprocessor technology: Minimizes maintenance downtime. -- 6 CFM @ 90 PSI; 1,900 CFM @ 8" Dust outlet.NOTES: -- All equipment as taken from service. -- Does not include: Setup or installation; freight. - Available at additional cost. -- Photos describe the machinery as it was removed from service and not in reconditioned form. -- This equipment was installed adjacent to a KVAL COMMANDER Door Machine and kval 555 Door Sizer/Beveller and shared with a Norfield Door Loader. See DM-010597

NORTH AMERICAN PL-30 ROTARY PHASE CONVERTERPro-Line is the Professional Series, digital start, CNC rated, general purpose single phase to three phase rotary phase converter designed to take standard single phase energy and supply full running current to three-phase equipment.Equipped with: -- Control Panel -- NEMA 1 Enclosure (Indoor) -- Built-in Motor Starter -- Digitally Controlled and Protected Start Circuit -- ABB / Baldor Idler Generator Motor -- ODP (Open Drip Proof) – Indoor Rated -- Soft Start -- 10-Year Parts / Lifetime Labor Warranty

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6q NORTHFIELD 12HD 12" Heavy-Duty Jointer Specifications: Max. depth of cut 5/8", Rabbeting cap. 5/8" x 12". 17” x 51-1/2” x 32-1/2” H. Outfeed table size 17” x 43” x 32-1/2” H. Equipped with: 3-1/2” Dia. 3-Knife Cutterhead. 5 HP - 1,735 RPM Motor. 52” L x 5-1/2” H Cast-iron fence, with 0° - 45° Tilt. Swing-away guard.

NORTHFIELD Unipoint X-36A Radial Arm SawSpecifications: -- 5 HP Direct motor drive, 16" max. blade dia. x 1" dia. arbor, 4-1/2" max. depth of cut, 1-9/16" max. dado cap. -- 25" Max. crosscut (17-1/2" w/fence in normal position) and 31" max. ripping cap. (23-1/2" w/fence in normal position). Maximum 45 degree Miter:Guide Fence Regular Position 4" x 12-1/2"; moved to rear 4" x 14-1/2"; max. 70 degree miter; guide fence regular position 4" x 6"; moved to rear 4" x 8-1/2". Max. compound 45° miter 3" x 12-1/2"; motor raises to center of arbor to table top, max 10"; motor lowers center of arbor to table top, min. 3-5/8".Saw tilts to left 45°; saw pivot to right 70°; saw pivot to left 45°.Complete with: -- Safety guard w/kickback preventer, automatic blade return device & push button magnetic controls; 25" x 48" table; 32" table height.Approx. 1944 Monarch Unipoint Radial Arm Saw with I believe additional US government wartime tagging. The original designers and manufacturer of the Unipoint Radial Arm Saw that Northfield bought the rights to and still makes today.

Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw FEED SYSTEM --Saw motor: 15HP, 3PH 230/460V -- Feed: 1.5HP variable from 40′ – 120′ FPMPRODUCT DIMENSIONS -- Min. thickness: 3/16″ -- Max depth of cut: 4-1/16″ with 16"; Blade -- Max depth of cut: 3-1/16"; with 14"; BladeSpecifications: -- Direct Drive = Direct Drive -- Feed Hp. = 1.5 Hp. -- Feed System = 4"; Split Chain with True Trac -- Feed Speed = 40-120 FPM -- Assisted Start = Wye Delt"; -- Throat Capacity = 18-1/4"; -- Min. Length = 12"; 2nd Roller to Kickback -- Min. Thickness = 3/16″ -- Max. Thickness = 4-1/16"; W/ 16"; BladeGlue Line Rip = Guaranteed 12′ 4/4 stock @ 50 FPMEquipped with & Features -- Blade Size = 14"; Tungsten Carbide Tipped -- Dust Collection = 1417 Total CFM -- Dust Port Out = 4"; Top 6"; Bottom -- Arbor Diameter = 2″ Arbor -- Idle Rollers = (8) Idle Rollers -- Hold Down Style = 8 Spring Loaded Hold Downs -- Kickback Finger = (59) Lower (32) Top -- Automatic Mechanical Oiler -- Low Oil Warning = Low Oil Shut-off -- Laser = 100mw Laser Light & Mount Bracket