// This item is up for Auction at exfactoryauctions.com // https://bit.ly/40zDLa2 RUVO Door Lite Cutout machine Model 9715W Specifications: 7' Max. door height x 3' max. door width; max. lite sizes in 3' door 30" x 60", 24" x 64", or 20" x 66"; lock sizes 1-1/2", 1-5/8" and 2-1/8". Deadbolt sizes 1-1/2", 1-5/8" and 2-1/8"; corner radius 1/4" for both lite and faceplates; backset switch selectable for 2-3/8" or 2-3/4". "Broken Arm" design for lite cut outs in wooden doors. Machines wood or steel doors (to 16 ga.) with 3 HP cutter head, 2-speed operation with 2,400 or 4,700 RPM; (2) horizontal stations, features door length adj. and end clamps. Equipped with: Boring for lock, deadbolt, and latch, (2) Back fences, steel hole template locating pin, template clamp, end clamp cylinders, flip stop assembly on the back fence. The 9700 control box provides the operator with exceptional versatility allowing independent operations for special house orders Recommended cutter head ONSRUD 15-05 cutting bit with reverse flute (interchangeable with EKSTROM-CARLSON bit 088-1680). Ruvo's 9700 Door Lite Cutter series machines are manufactured to last under heavy use and are the finest available to steel and wood door suppliers. The heavy-duty, easily operated cantilever cutting arm is key to the model's speed and efficiency. After the lite template and door are pneumatically clamped, its arm follows the template edge as a 1/2" cutter bores through the door.

RYE R 72 2-Spindle Automatic Rotary Copy ShaperSpecifications: -- Cutting circle cap. 24" - 80", Max. square cap. 56", Max. rectangular shape cap. 71" x 35-1/2", & Max. length capacity 50". -- Table size 68" Dia. x 40-1/2" H. -- Table speeds 0.3 - 3 RPM. -- Spindle speed 9,000 RPM. Equipped with: -- (2) 1-1/8"; Dia. High frequency floating spindles, with Frequency changer. -- 6-1/2"; Dia. Center clamp plate.

SAV S 53 S Single Sided Planer20" Width x 1/8" to 12" opening; 6.6 HP motor, 4-knife 4-3/4" dia. cutterhead rotates @ 5,000 RPM, max. cutting depth 5/16" -- (4) fixed feed speed settings 13 - 23 - 36 - 59 FPM. Equipped with: -- (1) Steel outfeed roller, (2) adjustable bed rollers, sectional infeed roller, sectional chip breaker, manual raise & lower w/mechanical digital readout; -- Table size 41" x 21". Complete with: -- Emergency stop, magnetic starter w/overload protection & 5-1/2" dia. dust hood.

SAC F 430 430 mm (16.93") Jointer Specifications: Max. depth of cut 8 mm (0.31"), Rabbeting cap. 1/3" x 16". Infeed table size 430 x 1,570 x 860 mm (16.93” x 61.81” x 33.86”) H. Outfeed table size 430 x 1,280 x 860 mm (16.93” x 50.39” x 33.86”) H. Cutterhead speed 5,000 RPM. Equipped with: 120 mm (4.72”) Dia. 4-Knife Nickel-Chromium Molybdenum Steel Cutterhead, with "TERSA" Knives. 3 kW (4HP) Motor, with Brake. 1,200 mm L x 160 mm H (47.24” L x 6.30” H) Aluminum fence, with 0° - 45° Tilt. Swing-away guard. Knife setting gage. Complete with: Spare Knife Set (Needs sharpening).

SAC - PRIMA K 630, ...Single Head Sander24" Width cap single head. -- Combination sanding head with: 4-3/4" Dia. grooved rubber contact roll & 2" wide polishing platen. -- 7.5 HP Motor; abrasive belt size 25" x 75" with air tensioning & electronic abrasive belt tracking. -- Dual feed speed 15 or 31 FPM; infeed & outfeed rubber-covered holddown rolls. -- 6-1/4" Motorized thickness adjustment by 0.5 HP motor with: LED Readout, and automatic part thickness adjustment; micro switch; 7" dust hood opening. -- Complete with: --: Emergency stop button, motor load meter, and selection of belts.

SAC TS120 Heavy Duty Single Spindle ShaperSpecifications: -- Precision ground cast iron table: 51" x 32 -- Max tool diameter: 250 mm / 9.84" -- Capacity under nut: 6" -- Main motor: 9 HP -- (5) Spindle speeds: 3000 / 4500 / 6000 / 8000/10,000 RPMEquipped with: -- Magnetic controls with overload protection -- Self braking motor -- Guard assembly with -- Fence assembly with micro adjust on outfeed fence -- Miter slot in table -- Interchangeable spindles -- Reverse rotation switch -- Manual raise and lower of spindle by handwheel -- Spindle lock for tool changes -- Mechanical readout for spindle height in handwheel -- Electronic indicator for RPM -- Includes tool box with accessories and wrenches, manualsNote: Machine has a 1600 CFM dust requirement.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5x Entry-level Vertical panel saw for cutting various materials, straight & square to 1/32". Specifications: 3.25 HP Industrial Duty saw motor; 8" saw blade cap. with 1-3/4" max. material thickness; 64" crosscut (vertical position) with spring-loaded counterbalance system; unlimited rip-cut length cap. Features: Saw head rotates 90° to switch between rip and crosscut modes; adjustable scales on a 10' welded steel frame. Complete with: Zinc plated 1-3/4" guide tubes with "Nylatron" 4-roller bearing system; +/- 1/32" squaring or straight cutting tolerance. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SAFETY SPEED MFG 60HA Hot Air Edgebander; Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in ability.The NEW "60HA" features: -- Electronic variable speed control -- Digital Electronic temperature control -- Adjustable Heat nozzle that saves energy. -- Electromagnetic end-cutters; no compressed air needed -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean -- Automatic conveyor for consistent feed rate.....and yes it is "American Made"!

SAFETY SPEED 72GP EDGEBANDER -- Digital P.I.D. Temperature control Glue Pot that reduces overheating and burning of the glue. -- Standby temperature mode for small runs. -- Short 10 - 15 Min heat up time -- Digital Electronic temperature control. -- Adjustable Heat nozzle that saves energy. -- Electromagnetic guillotine end-trim means no compressed air needed. -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean. -- Automatic conveyor for consistent feed rate -- American Made.

SAFETY SPEED 3760 Wide Belt Sander;Heavy welded construction minimizes vibration and ensures consistency in sanding.Specifications: -- Single-head 37" wide Combination Sanding Head. -- Rubberized 4-1/4" dia. contact drum with a 2-1/2" finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- 15 HP 3-Phase motor main drive motor. -- 37" x 60" Abrasive Sanding belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Available Options: Hour meter and 15 HP, 3-Phase motor, and digital readout for conveyor bed opening. -- Dimensions: 50-1/2" L x 47" W x 63" H (Crated Dimensions - 55-1/2" L x 52" W x 68" H).

SAFETY SPEED MODEL 4375 WIDE BELT SANDERHeavy welded construction to minimize vibration and ensure consistent sanding. -- Single 43" Wide combination sanding head. -- Rubberized 5-1/4" contact drum with a 2-1/2" wide finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- DC Conveyor drive with variable feed rate of 0 - 18 FPM. -- 43" x 75" Abrasive belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Avaialble Options: Motorized conveyor setting; Hour meter; Digital height setting; and 20 or 30 HP 3-Phase motor. -- 53" L x 56" W x 70" H (Crated Dimensions - 58" L x 61" W x 75" H).

SALVADOR - SUPERANGLE 600, ...Pusher Chop Saw. Provides complete chop to length & optimization of wood strips including the elimination of defects. -- Infeed is made of Heavy-Duty steel frame; working height: 1,000 mm (39") from floor level; safety provided by a light curtain. -- Pusher slides on double hardened rails. -- Reading Operation: Uses (2) Sensors: (1) for overall length and the other to read the crayon marks. -- Transmission of power: From motor to the carriage; accomplished by a 50 mm wide steel reinforced toothed belt. -- Part held in place by (2) aligners before & after the blade; insures a square cut. -- Saw box area: Enclosed by interlocking steel cover with a large window for clear view; Saw travels through an aluminum table insert that can be easily changed as needed; High Efficiency motor, IE3 rating, helps keep power consumption at a minimum. -- Technology: Operating software: Customized Windows-based program; designed to be intuitive and specially designed for optimization of the wood. -- Large 19" monitor at operator eye level; PC set up with: SSD Double hard drive with 2nd being a clone to have and be ready to back up in the machine. -- Cut lists: Can be uploaded remotely by network connection or flash drive; chop length optimization can be set for minimum waste priorities. -- Optimizer supports defecting crayons, as well as up to 5-grade qualities. -- Electronics: Multi tap transformer steps down higher voltages; 460 - 600 to the voltage requited by the machine. -- SP 15 Magnetic Strip Measurement: Technology improves positioning from basic encoder standards to absolute measurements of +/- 0.1mm. -- Outfeed: 0° Belt and (1) PC double ejector. For applications of many workpieces cut at angles, it is best to eject the workpieces together with one large rack & pinion ejector. Workpieces are pulled from the Saw on an outfeed belt. - Once the parts are clear of the Saw, the large ejector manages all cuts in 1-push onto the steel table for collection. WORKING CAPACITYMaximum board length before cutting: 5,100 mm (16').Minimum board length before cutting: 500 mm (19.6").TECHNICAL SPECIFICATIONSMain saw power: 15 HP.Saw blade specifications: SA600; Max. 00 mm; dia. bore 35 mm.Maximum pusher reading speed: 60 MPM (200 FPM)Maximum pusher pushing speed 60 MPM (200 FPM)CUTTING CROSS SECTION &#9679 0°: 100 mm x 360 mm / 160 mm x 310 mm. &#9679 +/- 45°: 100 mm x 260 mm / 160 mm / 220 mm. &#9679 +/- 70°: 100 mm x 120 mm / 160 mm x 100 mm.Minimum: 15 mm x 30 mm.Number of cuts within last 40 mm of board One: (1)Maximum workpiece weight: 110 kG (242 Lbs).Power Requirements &#9679 11 kW. &#9679 Primary supply voltages: 220/380/420/440/460/480/560/580/600 V.Pneumatic Requirements &#9679 Compressed air supply: 600 - 800 kPa (6 - 8 bar). &#9679 Maximum air consumption: 300 Nl/min.Dust Extraction &#9679 Intake diameter: 160 mm Upper; 120 mm lower/ &#9679 Extraction System Collection speed: 28 M/s. &#9679 Dust Extraction Capacity: 1

SAMUEL TANK-660V-150PSI 660 Gallon Air Receiver660 Gallon Vertical Air Receiver Tank. • Diameter O.D./I.D.: 42 O.D. • MAWP: 150 PSI @ 400° F • MDMT: -20°F @ 150 PSI • Capacity: 660 Gallons • Pressure: 150Support & Attachments: • 8 Base Ring • Safety Valve & Pressure Gauge - 700/MCTK-SW10-150Recommended Option: Zero Loss Compressed Air Condensate Trap w/WindowPowers through Condensate buildup and Ideal for Compressor applications up to 100 HP (500 SCFM).Ideal for inline filters up to 5000 SCFM. • The WaterHog™ design avoids small passages common on competitor designs, ensuring clog-free operation. • Fully Automatic Operations. No timer or manual settings • No Electrical Connections. WaterHog™ is powered by compressed air, avoiding the need for electrical wiring and connections. • Energy Saving Operation. Zero compressed air loss when properly installed with balance line. • Check with your utility to see if it qualifies for energy efficiency incentives. • WaterHog™ pays for itself when replacing open condensate drain valves or timer traps. • Low Profile. • The 4.7" vertical operating height allows WaterHog™ to fit where other larger units can't. • Max Operating Pressure: 200 psig • Min/Max Control Pressure: 40/130 psig • Min/Max Temperature: 34/170 F • Inlet / Outlet Connections: 1/2 inchPrice ...$ 450.00 (2) Year Warranty Included

KENT - Single Head, ResawSpecifications: -- 15 HP Motor. -- Blade size: 168"; x 1"; x 0.035"; 2TPI. -- 6" Wide feed belt. -- Operational working heights: 1/4" minimum cut to 8"; maximum. -- Feed speed: 20 - 150 Feet per minute.

SAND-RITE DB-612 DLX Sander with Heavy Duty Cast Iron StandCustom ordered to fit your requirements with quick 3 week lead-time!Specifications: -- (1) 6" Diameter x 7" Wide pneumatic drum head , which allows the operator to regulate how firm the sanding head needs to be to conform the head to what they are sanding. -- Motor: 3/4 HP -- (1) B-12 Brush Head, which allows the sanding irregular surfaces with out loss of shape. -- And matching Heavy Duty Cast Iron Stand.

SAND-RITE DUO-DLX Spindle Sander; Horizontal spindle sander with 3/4 HP BALDOR motor. -- Optional brush heads sand irregular surfaces with out loss of shape, and the optional pneumatic drum heads (available in 2" to 8" diameters) allow the operator to regulate how firm the sanding head needs to be to conform the head to what they are sanding. -- Price does not include the stand - Add $308.00 Cast iron stand."Drums, brush heads, and sleeves are additional".Brush Head: ADD $ 175.00 2" X 8" pneumatic drum: ADD $ 140.008" X 9" pneumatic drum: ADD $ 302.00 Special note: 220 grit is the finest grit supplied for Brush Head

SANDINGMASTER - KSB-900, ...Single Head Wide Belt Sander36" Width cap.; combination sanding head.Head: Rubber covered spiral grooved contact roll & finishing platen.Specifications:15 HP Main motor.37" x 75" Abrasive belt size.Electronic tracking and air tensioning of abrasive belt.Rubber covered infeed & outfeed holddown rollers & holddown shoes.Variable feed speed 15 - 45 FPM via 1.5 HP motor.0" - 5" Manual part thickness opening.Includes: Optional floating bed for sanding fine veneers.Equipped with & Features:Extended infeed.Load meter.Disc brake on main motor.Safety stop bar.

SANDINGMASTER SA3300-900 TRIPLE HEAD WIDE BELT SANDER3-Head, 36" max. width cap. - 1st Head: 11" Dia. rubber covered contact roll, 24 HP motor; 2nd Head: 11" Dia. rubber covered contact roll, 18 HP motor; 3rd Head: Combination head with rubber covered contact roll and finishing platen, 18 HP motor. 37" x 75" Abrasive belts with electronic tracking. -- 2-Speed conveyor feed, 23 & 46 FPM, 1.0/1.7 HP motor, 0" - 6" motorized part thickness with LED readout, a joystick lever controls raise and lower of feed bed and start and stop of conveyor belt, also includes "SP-Matic" automatic part thickness setup. -- Thin veneer sanding package with rigid table setting for solid wood dimensioning and floating table setting for veneer sanding, infeed and outfeed spring loaded holddown shoes. -- Includes: Motor load meters, electronic brakes on sanding heads, infeed safety shutoff bar and 18" infeed conveyor area. Actual model "SA-3300-900".

SANDMAN DL7236 Downdraft Sanding Table;The SANDMAN Sanding Table is a dedicated sanding station that doubles as a workbench. -- 72" X 36" Rubberized work surface. -- 1.5 HP T.E.F.C. 220V 1-Phase motor with 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 4" wheels, (2) ridged, (2) swivel-lock 2-ways. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Adjustable in height from 34" - 38". -- Grid system top adds versatility. -- 10.4 Cu. Ft. of built in storage area with 1 pull out shelf. -- 18 Months Limited WarrantyNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

SANDMAN M7236 Downdraft Sanding Table110V 1 HP (M7236) T.E.F.C Motor with 15’ power cord. -- 72" x 36" Rubberized work surface. -- 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 5" wheels, (2) ridged and (2) swivel-lock 2-ways. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Grid system top adds versatility. -- (18) Month warranty on parts.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.