HASKO HSEM & HSFM End Matcher High-Speed Feed Through; Complete with Infeed conveyor, Transfer conveyor, End matcher, Outfeed conveyor and All ToolingSpecifications: -- The feed-thru system allows for continuous feeding of random length parts with any kind of profile. -- Width cap. 1" x 7"; length cap. 8-1/2" x 12'-0" lengths; 5/16"- 2" max. thickness cap.; -- Endmatcher with feed speed from 12 - 154 lugs per minute. -- Infeed powered roller conveyor 12" x 16', feeding singulator wheels for introducing lumber onto 9-strand infeed chain deck for the Endmatcher. -- Chain deck allows for spacing of boards for singulation between the spacing bars on the infeed deck system feeding the right-hand & left-hand stations. -- Infeed to tongue cut 19'-4" x 10', Crossover chain 14' x 10' to groove cut, outfeed chain 24'-0". Transport sprockets 50 pitch.Equipped with: -- Tongue first position and groove second; (3) heads per station all with VFD 5 HP motors at 6,000 RPM. -- Both the right and left-hand processing stations have a scoring, trim and profiling head. Includes: -- (One) Auxiliary infeed 8' x 7" ABC for infeed to Tongue unit with 3/4 HP variable speed drive -- (One) Auxiliary outfeed conveyor 13'-6" long x 7" wide slider belt with 3/4 HP variable speed drive to be installed behind the groove unit and extends out for grading station.Tooling: 12" in diameterNote: Specifications must be verified Still under power.

--AT AUCTION-- HEESEMANN KSA 8 CSD 80" Lacquer/Sealer Sander This is a Very Special "extra wide" HEESEMANN equipped with: HEESEMANN's patented "CSD" selective pressure adjustment system, sensors placed every 5/8" (16 mm) sense part configuration; pressure for each segment can be preprogrammed to provide less pressure on the outer edges, or more in the center if desired. The "CSD" computer control will hold a max. of (20) programs. Equipped with: Segmented Polishing Platen: Segments are computer controlled to conform to irregular shaped panels; sanding pressure on panel edges is adjustable. Platen will accept panel thickness variation up to 5/64" (2 mm). Dual speed motor: 26 & 31 kW (35 & 42 HP); abrasive belt speed: 10 + 20 MPS (33 + 66 FPM); abrasive belt size: 2,050 mm x 3,250 mm (80.7" x 128"); pneumatic air tension and tracking control. 250 mm Dia. Rotary Panel Cleaning Brush, 5 HP motor, 150 mm Outfeed Rotary Panel Cleaning Brush, and 2 HP motor. Additional Features: Vacuum bed assembly to ensure flatness of parts and feeding of small parts. Computer control and monitor, light indication of panel movement; electronic abrasive belt tracking. Feed System: Variable feed speed from 5 - 15 MPM (16 - 49 FPM); 4 kW (5 HP) feed motor; motorized thickness opening. NOTE: This Sander had a "Brand New" ...$ 17,000 display/control installed shortly before it was taken out of service in 2016. The machine has been in storage since that time.

NOTE: Wide Belt Sander was completely rebuilt for $68,000 in 2019. 53" 4-Head Wide Belt Sander Head Configuration: 1st Head: Spiral rubber contact roll, 45 kW, 460 V; 2nd Head: Spiral rubber contact roll, 44 kW, 420/480 V; 3rd Head: Spiral rubber contact roll, 37 kW, 460 V; 4th Head: Platen design with (2) Smooth steel rollers; Final Station: Rotating air-jet blow-off; 12" Load space, Sensing, Abrasive belt size 1,400 x 3,250 mm (55.12" x 127.95"), T.B. WOODS "E-TRAC WF-2" Sensor-less vector drive for variable sanding head speed Vacuum feed mat, Adjustable fence, VACON Variable speed drive for feed speed, 8.6 kW, 254-277/440-480 V, Electronic belt tracking & Pneumatic motorized thickness control, Approximately 2 HP, 230/460 V HEESEMANN Swivel-mounted touchscreen control Overall dimensions: 164" x 92" x 112" H, Weight: 11,000 kg (24,250 Lbs.) NOTE: Machine is currently in storage.

54" 3-Head Orbital Sander, For abrasive belt cross-grain scratch removal with (3) Orbital Platen Heads & (1) Rotary Brush Head Configuration: 1st, 2nd, & 3rd Heads: Each with 5" W Platen, Dual orbital action, High-speed orbit on sanding pad with 3 kW (4 HP) Motor, Secondary oscillation with 1-1/2 HP Motor, "Quick-change" abrasive material, Inverter drive; Rotary Brush: 6" Maximum diameter, 3-1/2 HP Motor, Brush loading, Ionization bar for final fine dust collection Vacuum conveyor bed with 10 HP Blower motor, Inverter-controlled variable speed drive with 4 HP Motor & Variable feed speeds 15 - 66 FPM, Automatic conveyor belt tracking, Automatic parts thickness, with 1/8" - 4-5/8" Thickness range & Programmable height adjustment, (4) Screw jacks PC-based control, Windows XP, Touchscreen monitor, Infeed & outfeed spring-loaded hold-down rolls, Infeed hand safety stop, outfeed emergency stop, Digital motor load meters, High-efficiency dust extraction NOTE: Machine is currently in storage.

HEESEMANN - LSM 8, ...3-Head Wide Belt Sander53" Width cap. Crossbelt, Combination , and DrumHead Configuration:1st Head: Cross Belt Sanding Unit, 2-speed motor - 19/24 kW (26/33 HP). - Abrasive belt speed: 12/24 MPS (39/78 FPS); Cross Belt (Cloth), 4,800 x 150 mm (189" x 6").2nd Head: Combination Longitudinal Sanding Unit Front retractable roller for light calibrating and segmented pad system for fine sanding; bi-directional sanding; Door-in-Door viewing; 2 speed motor - 31/37 Hp, abrasive belt speed 10/20 mps (33/65 fps3rd Head: Longitudinal Sanding Unit Internal pressure segment belt for finer sanding Inner chevron belt; Inverter driven motor: 26 kW (34 HP); abrasive belt speed: 0.5-16 MPS (1.6-52 FPS); Longitudinal Belt: 2,620 x 1,350 mm (103" x 53").Unit 4: Panel Cleaning Brush, Fiber trimming.Specifications: -- HEESEMANN's LSM-8 Sanders are designed for heavy (2 - 3) shift operations; this Sander is ideal for: Whitewood sanding of veneered panels and panels coated with various sealers. -- The crossbelt removes tape, cuts short fibers that contribute to grain rising, and sands panels with "book-matched" veneer. -- The last sanding unit is equipped with an internal pressure segment belt for an extra smooth finish.Enhanced 16 mm control roller spacing with (3) rollers per segmented pad. -- CSD® Segmented pad system is equipped on all (3) sanding units. -- Pneumatic conveyor belt cleaning. -- Infeed extension with non-driven rollers. --Electronic variable feed speed from 5 - 25 MPM (16-82 FPM). --Workpiece thickness 3 mm - 140 mm (1/8" to 5-1/2").Equipped with & Features: -- Vacuum Table: Only HEESEMANN builds it into the frame for superior holddown! -- Industrial PC controller, Windows® Operating System.Width Capacity: 53"

HEESEMANN LSM-8/3-OSR Wide Belt Finishing Sander, 52" and (3) Heads; Equipped with: (1) longitudinal segmented platen head. and (2) Orbital Platens -- 1st Head: Longitudinal segmented platen head. Segmented Polishing Platen, 20 & 27 HP dual speed motor. electronically controlled segments to conform to panel size,.2620 x 1350 mm (91.4 x 53.2") Sanding belt. - Equipped with HEESEMANN's patented "CSD" selective pressure adjustment system, sensors placed every 16 mm (5/8") sense part configuration; pressure for each segment, to eliminate sand through, can be pre-programmed to provide less pressure on the outer edges or more in the center if desired. The "CSD" computer control will hold a maximum of (20) programs. -- 2nd & 3rd Heads: OSR Dual orbital action head with (1) high-speed orbit on sanding pad, powered by 3 kW (4.5 HP) motor.Secondary oscillation movement of platens powered by 1.5 HP motor. Upstream and downstream vacuum chutes on each head for dust localized dust pickup.- Platens feature "quick change" abrasive material; Both orbital heads with variable speed inverter drives. -- Outfeed Rotary Brush with cleaning brush loading with single end adjustment , 6" max. dia., 3.4 HP motor. -- Variable feed speed from 13 to 82 FPM, 6.5 HP feed drive. -- Infeed and outfeed Ssissor Lift and Control box shown are not included. -- Motorized thickness opening 1/4" to 3-5/32" max. - -- Power Consumption: 63 KW, 75 Amps. -- Separate display console for CSD control.

HEESEMANN - LSM 8-5 RRRL, ...53" Wide Belt Sander53" Width cap.: Drum, Drum, Drum, and CSD® Pad.Head Configuration:• Unit 1 - Longitudinal Sanding Unit: Steel contact roller, helically grooved. - Single-speed 48 HP motor, electronic braking.• Unit 2 - Longitudinal Sanding Unit: Rubber-covered contact roller, helically grooved. - Single-speed 35 HP motor, electronic braking.• Unit 3 - Longitudinal Sanding Unit:- Rubber-covered contact roller, helically grooved. - Single-speed 35 HP motor, electronic braking, bi-directional drive.• Unit 4 - Longitudinal Sanding Unit: CSD® Segmented pad system, 2-speed 20/26 HP motor, electronic braking.• Unit 5 - Panel Cleaning Brush: Fiber trimming, 2.3 HP Motor.Specifications: -- Working height: 880 mm (34.64"). -- Workpiece thickness: 3 mm to 150 mm (1/8" to 6"). -- Working width: 1,300 mm (51-1/8"). -- Longitudinal belt: 1,350 x 2,620 mm (53" x 103"). -- Machine voltage: U.S. Electrics 480 Volts, 3-Phase, 60 cycles.Constant Pass LineController: -- Industrial PC. -- TFT Color touchscreen. -- Windows® Operating System. -- (100) Memory addresses for: • CSD® sanding pressure. • Sanding start/stop. • Sanding belt speeds. • Grit sequence indication. • Sanding belt selection - "ON/OFF". • 1-Button sequenced starting for all motors.RS-232 Serial port.RJ-45 LAN Port.Modem with software licenses.For All additional, detailed specs, select the "View Literature" link .

HEESEMANN MFA-6 Wide Belt Sander with (3) Heads and a Cleaning Brush.Basic Working Capacity: Max. working width is 1,350 mm (53"), thickness opening min./max. is 3 mm - 150 mm (0.118" - 6.0"). - Conveyor belt speed variable from 5 - 15 MPM (16 - 49 FPM); constant pass height of 880 mm (34.65").Features: -- Head Configuration: (2) Steel contact drum heads, (2) "CSD" controlled contact platens, and (1) rotary cleaning brush. -- Belt Handling: Broken belt monitor and automatic infrared belt tracking; intermittent pneumatic belt cleaning device, belt access on the left-hand side. -- Conveyor Belt: High powered vacuum holddown by 8.6 kW (11.5 HP) fan drive motor, automatic vacuum monitoring system. Variable speed by inverter from 5 - 15 MPM (16 - 49 FPM). -- CSD-32 System: Heads #3 & #4 are equipped with HEESEMANN's Patented "Segmented Pad System", Computer Selective Pressure Control from 0 - 150%, precise surface & edge pressure control, edge pressure independent of surface; 2 mm thickness compensation - zero maintenance with sealed enclosure.Sanding Head Configuration: -- 1st Head: Steel Contact Roll, 8" dia., 25.3 kW (34 HP) motor; sanding belt size of 2,150 mm x 1,400 mm (85" x 55"); belt speed is 18 MPS (60 FPS); equipped with belt motor brake. -- 2nd Head: Steel Contact Roll, 8" dia., 17.5 kW (24 HP) motor; sanding belt size of 2,150 mm x 1,400 mm (85" x 55"); belt speed is 18 MPS (60 FPS); equipped with belt motor brake. -- 3rd Head: Sanding Platen, electronically controlled pressure segments to conform to panel size, 17.5 kW (24 HP) motor; sanding belt size is 2,150 mm x 1,400 mm (85" x 55"), belt speed of 18 MPS (60 FPS); equipped with belt motor brake.. -- Cleaning Brush: Outfeed Rotary Panel Cleaning bristle brush, 120 mm (4-3/4) dia., 0.9 kW (1.2 HP) motor, and holddown roller. -- Includes: Outfeed conveyor table, 48" width x 80" length. Large batch of sanding belts.Controls: -- LCD Operating Panel with: Touch-screen and graphical display, (20) memory addresses for sanding head selection, thickness opening, conveyor feed speed, 1-button sequenced starting of sanding motors, and tracking of sanding belt usage. -- Operating Requirements: Electrical is 151 Amps @ 460 Volt; Dust Extraction is 5,800 CFM @ 3" static pressure. Machine weight approx. 7,000 kG (15,500 Lbs). -- Complete With: Extended infeed table with (2) idle rollers, interior lights, emergency and oversize part thickness safety bar, and Manual.

HEESEMANN MFA-8 D Wide Belt Sander (4) Heads; 53" Width cap. Veneer/ Sealer Sanding Wide Belt.Great Lacquer/Sealer sander with: (2) Segmented polishing platen, (2) Orbital heads, (1) De-nibbing/Polishing brush.Head Configuration: Head 1: Segmented polishing platen, 5/8 wide segments CSD Control, Variable speed abrasive belt with inverter RPM control, 15HP motorHead 2: Segmented polishing platen, 5/8 wide segments CSD Control, Variable speed abrasive belt with inverter RPM control, 15HP motorHead 3: Orbital head with composite/dense fiber loading; 5HP motorHead 4: Orbital head with composite/dense fiber loading: 5HP motor(1) Brush Type head for de- nibbing and polishingSpecifications: -- LCD monitor with graphic display and key pad entry, 20 program capacity, -- Pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if required.Equipped with & Features -- Air blast abrasive belt cleaner on heads 1 & 2. -- Variable feed speed from 10 to 49 FPM via 2 HP feed drive. -- Motorized thickness opening 1/4" to 3-5/32" max. -- Rubber covered Infeed and out feed holddown rolls.

KENTWOOD M 609X Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 9-1/16"" x 6". Head sequence & Spindles: -- Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 20 HP and bottom 15 HP motor. -- Spindle dia.1 13/16" with cutterhead speed of 7,200 RPM. -- All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chipbreakers.Electric brakes on spindles 2 through 5, Cutting circle of vertical spindles: 125 mm to 200 mm (4,7" X 7.8") Cutting circle of horizontal spindles: 125 mm to 200 mm (4,7" X 7.8"). Feed works: -- Cardan feed-works drive system with pneumatic pressure rollers, Inverter driven 5 HP feed system with feed speeds of 20 - 98 FPM. Infeed. -- Complete with: Full width driven bottom in-feed roller before first head, Serrated steel feed rollers before top horizontal head.Rubber coated feed rollers after top horizontal head, (2) Rollers above and (1) in the table prior to first bottom spindle; (2) additional powered rollers in the table. -- In-feed table 2M (72"), chromed tables and fences. Includes: -- Central lubrication, manual table lubrication pump. -- Side pressure roller mounted to infeed table, Short stock attachment at right spindle for short part, -- Sound enclosure and Interior cabin light. Note: Floor space: 77" W x 166" L x 68" T, Machine weight: 10,800 lbs.

KENTWOOD M612HD 12"; W x 6"; H 6-Head Feed Through Moulder, with ToolingSpecifications: -- B-R-L-T-T-B. -- Working width 15 - 300 mm (0.59"; - 11.81"), Working thickness 15 - 150 mm (0.59"; - 5.91"). -- Spindle diameter 1-13/16". -- Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 36 MPM (20 - 118 FPM).Equipped with: -- Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 25 HP, Top 25 HP, & Bottom 25 HP Motors, with Electronic brakes. -- Motorized spindle positioning of Heads #4 & #5, with LED Readout. -- Outboard bearings on Heads #1, #4, #5, & #6. -- Mechanical readouts for pressure elements & chip breakers, All chip breakers & pressure elements with Pneumatics. -- Inverter-driven feed system. -- Electronic interlocking feed height adjustment. -- (1) Serrated powered table rollers, -- (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. -- 13-1/2"; x 88"; x 38-1/2"; H Chromed infeed table, with 8-1/2’ L 7/8"; H Fence & Side pressure roller, Side pressure roller mounted at infeed. -- Central lubrication. -- Manual table lubrication pump. -- Full sound/safety enclosure. -- Remote pendant control.Complete with: -- Accessories & Tooling.

KENTWOOD M609HD 9"; W x 6"; H 6-Head Feed Through Moulder, with ToolingSpecifications: -- B-R-L-T-T-B. -- Working width 15 - 229 mm (0.59"; - 9.02"), Working thickness 15 - 150 mm (0.59"; - 5.91"). -- Spindle diameter 40 mm (1.57";). -- Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 36 MPM (20 - 118 FPM).Equipped with: -- Head Sequence: Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 25 HP, & Bottom 30 HP Motors, with Electronic brakes. -- Outboard bearings on Heads #1, #4, #5, & #6. -- Mechanical readouts for pressure elements & chipbreakers, All chipbreakers & pressure elements with Pneumatics. -- Inverter-driven feed system. -- Electronic interlocking feed height adjustment. -- (1) Serrated powered table roller before 1st Head, -- (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. -- 10-1/2"; x 65-1/2"; x 39"; H Chromed infeed table, with 7’ L 7/8"; H Fence & Side pressure roller, Side pressure roller mounted at infeed. -- Central lubrication. -- Manual table lubrication pump. -- Full sound/safety enclosure. -- Remote pendant control.Complete with: -- Accessories & Tooling.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4p KENTWOOD M612HD 12” W x 6” H 6-Head Feed Through Moulder, with Tooling Specifications: B-R-L-T-T-B. Working width 15 - 300 mm (0.59” - 11.81"), Working thickness 15 - 150 mm (0.59” - 5.91"). Spindle diameter 1-13/16". Spindle speed 6,000 RPM. Variable feed speeds 6 - 36 MPM (20 - 118 FPM). Equipped with: Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 25 HP, Top 25 HP, & Bottom 25 HP Motors, with Electronic brakes. Motorized spindle positioning of Heads #4 & #5, with LED Readout. Outboard bearings on Heads #1, #4, #5, & #6. Mechanical readouts for pressure elements & chip breakers, All chip breakers & pressure elements with Pneumatics. Inverter-driven feed system. Electronic interlocking feed height adjustment. (1) Serrated powered table rollers, (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. 13-1/2” x 88” x 38-1/2” H Chromed infeed table, with 8-1/2’ L 7/8” H Fence & Side pressure roller, Side pressure roller mounted at infeed. Central lubrication. Manual table lubrication pump. Full sound/safety enclosure. Remote pendant control. Complete with: Accessories & Tooling.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4q KENTWOOD M609HD 9” W x 6” H 6-Head Feed Through Moulder, with Tooling Specifications: B-R-L-T-T-B. Working width 15 - 229 mm (0.59” - 9.02"), Working thickness 15 - 150 mm (0.59” - 5.91"). Spindle diameter 40 mm (1.57”). Spindle speed 6,000 RPM. Variable feed speeds 6 - 36 MPM (20 - 118 FPM). Equipped with: Head Sequence: Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 25 HP, & Bottom 30 HP Motors, with Electronic brakes. Outboard bearings on Heads #1, #4, #5, & #6. Mechanical readouts for pressure elements & chipbreakers, All chipbreakers & pressure elements with Pneumatics. Inverter-driven feed system. Electronic interlocking feed height adjustment. (1) Serrated powered table roller before 1st Head, (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. 10-1/2” x 65-1/2” x 39” H Chromed infeed table, with 7’ L 7/8” H Fence & Side pressure roller, Side pressure roller mounted at infeed. Central lubrication. Manual table lubrication pump. Full sound/safety enclosure. Remote pendant control. Complete with: Accessories & Tooling.

// This machine is in an Auction on exfactoryauctions.com// // Link to Machine: http://exf.ac/i4o KENTWOOD R 340 E 14" Dip Chain Gang Rip Saw, with ADVANTAGE RIP 1 Infeed, Saw & Infeed Installed New in 2010 Specifications: Arbor cap. 13". Max. blade dia. 14". Stock thickness 1/2 - 4.3". Min. stock length: 21.3" with Pressure Plate & 15.8" without Pressure Plate. Max. pass through width 25". Arbor Diameter 2.17". Feed speeds 15 - 130 FPM. Equipped with: 50 HP - 1,720 RPM Motor. Automatic chain lubrication. 2.2 kW (3 HP) Feed motor. ? Anti-kickback fingers. Mobile pedestal control, with Touchscreen & Dual control sticks. Complete with: 2009 KENTWOOD "ADVANTAGE RIP 1" 19-1/4” x 151” x 37-1/2” H Infeed Powered Roller Conveyor, S/N 0980002, with 2 HP Motor, 3-1/2” Rollers, 5-3/4” Dia. Rubber-covered pneumatic hold-down wheels, & 16-1/2’ L x 4-1/4” H Fence. (3) Lasers. Machine & Infeed Conveyor Dimensions: 270" x 68" x 66" H. Control Dimensions: 20" x 18" x 44" H. Machine Weight: 5,000 Lbs. Infeed Weight: 750 kg (1,655 Lbs.)

Kentwood G300X Profile GrinderSpecifications: -- 12" Max. arbor length, 12" x 4" tool dia., profile grinding to 12". -- Tool cage movement with linear bearing guides for smooth grinding to +/- 0.0001") accuracy; -- Side tilt feature, -- Grinding wheel advance and back clearance angle settings. -- Stainless steel splash guards,Equipped with & Features: -- 15-gallon coolant system with stainless steel coolant tank. -- Grinding wheel with "quick change" style hub. -- Grinding wheel speed inverter controlled with speeds from 1,800 - 3,600 RPM; 2 HP drive motor. -- Tilting head assembly with radial (back) clearance angle from 15ø - 35ø, axial (side) clearance angle from 0ø - 20ø. -- Machine light, coolant, filters, and tracing pins.

KIKUKAWA - RP-12, ...Straight Line Rip SawSpecifications: --10 HP Arbor motor. -- 12" Blade cap. -- 18" Throat, 2-3/8" max. stock thickness. -- Variable speed from 75 - 150 FPM; 2 HP feed motor. -- Saw blade mounted overhead. -- Table size: 39" x 57".Equipped with & Features: -- Magnetic controls. -- (2) Sets of antikickback fingers. -- Automatic lubrication mechanism.Special Note: Rip Saw taken from service. Runs good glue line; OK for soft woods and surfaced materials. Does not do a good glue line on rough or semi-rough material. This is a Japan-built Saw, and they are built well with a small footprint .

KILLINGER KM-150 Bench-Top Flute & Barley Twist Machine for Right & Left-Hand Barley Twists & Straight FlutingsSpecifications: -- Maximum workpiece diameter 200 mm (7.87"), Maximum milling length 1,650 mm (64.96").Equipped with: -- 24-Position Indexing plate.Complete with: -- Legs.NOTE: No Router.Dimensions: 81" x 19" x 48" H.Weight without Legs: 110 Lbs.

KING CANADA KC-3105C 1,200 CFM Single-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 20" Dia. x 34-1/2" L, Cloth collector bag size 20" Dia. x 34-1/2" L. -- Inlet dia. 6", Outlet dia. 5".Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 4" Dia. Dust Hose Y-Fitting.

KING CANADA KC-3105C 1,200 CFM Single-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 20" Dia. x 34-1/2" L, Cloth collector bag size 20" Dia. x 34-1/2" L. -- Inlet dia. 6", Outlet dia. 5".Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 4" Dia. Dust Hose Y-Fitting.