10" Blade dia., 3 HP motor belt drives arbor at 4,200 RPM, 5/8" dia. left tilting arbor 0ø - 45ø, 3-1/8" max. depth @ 90ø, 2-1/8" max. depth @ 45ø, max. dado width 13/16" x 6" diameter. -- Front edge of saw to blade 12", 27" x 40" precision ground cast iron table, 34" table height. -- Equipped with: 50" XACTA FENCE system, miter gauge, 4" dia. dust outlet and magnetic push button starter.

JET - JC-3CF: Cyclone Dust CollectorCyclone action separates the heavier chips & particles and disposes of them into a 55-gallon drum. -- Large 8-fin, 14" steel impeller creates high velocity air flow that allows the lighter dust to pass through and be trapped in the filter. -- Filter bag provides: Almost 40 sq/ft. of filtration surface area for all dust particles 5-micron and larger. -- Collection bags: "Snap-In" design for quick & easy installation and removal. -- Use of JET's "EXCLUSIVE" pressure tube allows the use of a plastic collection bag in the drum without the bag getting sucked into the Cyclone. -- Special rectangular inlet pipe adds separation and additional air flow. -- Steel construction with: Welded seams & powder coated paint ensures long, dependable performance.

JLT 78H-16W-84L-40H-M4 Pneumatic Pod Press w/adjustable Opening.Specifications: -- Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 84" long steel platens for face gluing a variety of solid wood components. -- Powered by a total of (18) 20 square inch diaphragm cylinders. -- With it's modular design each section has its own pressure control and 40" opening. -- 16" Wide x 84" Long x 40" High with fixed clamping opening with 1-1/2" adjustable increments. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 78H-16W-42L Mini Air Pod PressThis Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, Specifications: -- 16" Deep x 42" long clamping capacity. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 126" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening. -- 12" Deep x 42" wide clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, 13" daylight. -- 12" Deep x 42" long clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1450 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,150 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 160 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 142 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 142 -- 79-1680-Handle $105 for use with 1/2" drive impact gun (adjustable torque preferred with a setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 160 -- 79-1680-Handle $120 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JOHNSON LOOSE BAGGING SYSTEMOne Set of (2) Loose Fill Bagging Systems -- Was Bagging Wood Chips in Plastic Bags. -- One Hopper receiving System for the (2) Units -- Two feeding systems -- Complete with Support Legs and Bag Conveyor -- Output Finish Bag Conveyors -- One Unit is Brand New and the Other is in Very Good Working Condition -- Production Rate 6 to 10 Bags Per Minute. -- Could Bag any Type of Free Flowing Material.Price is Loaded on your Truck.

JV MANUFACTURING - HE-60 BIG MOUTH: Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6". -- Main motor: 20 HP. -- Bale size: 60"; x 30"; x 48";. -- Cycle Time (No Load): 47 Seconds. -- Platen Force:120,600 Lbs normal; 140,800 Lbs max. -- Hydraulic Cylinder Bore Diameter: 8";. -- Hydraulic Cylinder Stroke: 84";.Equipped with: -- Conveyor hopper. -- Heavy-Duty operator controls.NOTE: Back cover is included.

JV MANUFACTURING MODEL - CC-02: Stationary CompactorSpecifications: -- Charge box capacity: 2 Cu/Yards. -- Clear Top opening: 40" x 58-1/2". -- Average cycle time: 63 Sec. -- Total normal force: 56,500 Lbs. -- Max. total force: 67,900 Lbs. -- Normal ram pressure: 33 PSI -- Max. ram pressure: 39.7 PSI.Equipped with: -- Standard 3-button controls. -- Heavy-Duty structural steel components and welded by AWS Certified Welding Technicians.Designed for: &#9679 Retailers &#9679 Hospitals &#9679 Hotels &#9679 Distribution Centers &#9679 Manufacturing Centers &#9679 Recycling Centers &#9679 Home Centers

(2) JV MANUFACTURING - VB-60-B & VB-72-B, ...Vertical Balers Lot: (2) Vertical Balers in great working condition!Specifications: -- Cylinder: 6" -- Main motor: 10 HPEquipped with: -- ANSI Z245.5 Compliant -- Key operated controls -- Quiet operating Vane Pump -- Gas spring assisted Loading Door

JV MANUFACTURING - PH-04, ...Pre-Crusher CompactorSpecifications: -- Hydraulic Cylinder: 7" -- Charge Box Capacity: 4 Cu.yd -- Cycle Time: 56 Sec -- Total Force: 77,000 Lbs -- Ram Face Dimensions: 60" x 35" -- Motor: 20 HPEquipped with: -- Rear Deck

JV MANUFACTURING - HE-60 BIG MOUTH, ...Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60"; x 30"; x 48"; -- Feed opening: 18,000 LbsEquipped with: -- Conveyor hopper -- Factory infeed conveyor -- Full penRefurbished work. New: Guides, press head cover, main door hinge pin, main door patch pin, oil & filters, hoses as required, seals in control manifold, belt on conveyor, drive chain, and sprockets on conveyor.Rebuilt: Cylinders, door latch cylinder, shear blades sharpened and adjusted. - Gear oil changed in conveyor drive.

JV MANUFACTURING SC-T2-34 Self-Contained Compactor with Cart TipperSpecifications: -- Feed opening: 58" x 41" -- Cylinder: (2) 4" -- Main motor: 10 HP -- Capacity: 34 yd.Equipped with: -- Rear hydraulic Cart Tipper -- Universal rails

JWC ENVIRONMENTAL Muffin Monster 3-Shred-H-800 Shredder/GrinderSpecifications: -- Model #: 3-Shred-H-800 - Stainless Steel -- Used only two times -- Stainless steel construction -- Alloy steel drive shafts and scrapers -- Cartridge-style tungsten carbide mechanical seals -- Mill opening:Length: 7 inches Width: 9 inches -- 5 HP motor -- Electrical:230 V 60 Hz Phase 3

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i64 JYDEN 4 M Motorized Miter Trimmer Complete with: 4-1/2” x 37” x 33-1/2” H Infeed.

KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24)Specifications: -- Rated capacity: 191 CFM. -- Max. pressure: 125 PSIG. Equipped with: -- 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end. -- 1:1 Motor-air end coupling. -- Wye-Delta reduced voltage magnetic starter. -- Electronic Thermo-Management (ETM) system. -- 2-Stage 4 micron air intake filter with Cyclone pre-separation & replaceable element. -- Safety pressure relief valve. -- Anti-vibration mounts. -- Sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with LCD Display & Touchpad.Complete with: -- Integrated Refrigerated Dryer. -- Compressor Operator Manual & Controller User Manual.Dimensions for this Specific Machine: 70" x 36" x 61" H.Weight for this Specific Machine: 750 kG (1,650 Lbs).