DOUCET RDM Door Master Rotary Door Clamp 5-Station Rotary Door Clamp Capacity & Features: -- Max. cap. of 36" x 96" per squaring assembly; Minimum 5.5" X 24", 2-1/2" jaws -- Single door clamp design and the rotating system offers high production. -- This machine offers precise & accurate squaring of stile & rail cabinet doors. Equipped with: -- (5) Rotating pneumatic sections; each section with pneumatic squaring assembly, (4) Adjustabler horizontal & (1) fadjustable vertical clamp -- Push button control for rotation with Heavy Duty 230V, 3-Phase gearmotor drive. -- Made of 100% welded tubular steel construction; Tear down not included in price.

DOUCET End-Pro 12 End Matcher -- 12" Cap. End Matcher with single shaper head that produces (2) joints/cycle; -- 12" max. width cap., 3" max. thickness, 5" min. stock length. Equipped with: -- Single vertical spindle, 10 HP - 5,000 to 7,000 variable RPM motor powered by AC inverter (reversable rotation). -- 1-1/4" Dia. x 6" long stackable spindle, 7-1/2" max. cutting circle with 1" max. depth of cut; spindle travel mechanically actuated with variable control. -- Spindle traverses in with climb-cut, shifts to the side and traverses out in climb-cut; averages (6) cycles/Min. Complete with: -- Automatic spindle brake, horizontal & vertical clamps for both tables. -- Has 1 set flooring heads. Aluminum back stop for flooring and wp4

DOUCET - MSB-ESB 16-G: Panel Sequencer (Edgebander & similar application)Model "ESB" increases the productivity of your Edgebander by: Maintaining the gaps between parts to their absolute minimum. -- It allows the Operator to stage several panels in its bottom feed magazine. -- Panels are released automatically as soon as the preceding one clears; the "no feed zone" on your Edgebander or feed end-to-end on your Shaper-Sander.Specifications & Operation -- "ESB 16" Features: 16" Wide x 54" long feed belt. -- Suitable to feed panels ranging from: 4" x 10" to 24" x 84" at up to 100 FPM. -- Feed hopper offers: Reserve capacity up to 12" thick or a max.150 Lbs. -- Sequencing of panels "fed lengthwise" is fully automatic. -- Sequencing panels "fed width-wise" or of panels larger than those described above require the assistance of an Operator. -- This model is made for left-hand feed EdgebanderNOTE: New feed roller installed lately at ...$ 1,600 cost.

DOUCET BT 3-48 Return Conveyor for Edgebanders with Panel TurnerFor Left Hand feed Edgebanders with: Right Hand Return Conveyor. -- Receiving table: 66" L x 84" W; Return Conveyor: 48" W; total length: 24'. -- Unit can process: 48" Wide x 108" length. -- Minimum part capacity: 4" x 12" For the side turner.Options Included -- Side mounted "PT 90" Panel Turner; 22" W x 89" L. -- Panels are turned 90° as part of the transfer process between the Receiving & Return Conveyor, eliminating panel overhang.Actual Model: BT3-48-H30-5-32-D-PT

DOUCET FB-36-5-16-G Return Conveyor -- Designed for: Shaping Sanding machines and Edge Foilers with a continuous transfer process. -- Left hand return with: 60" W x 36" L Receiving conveyor / transfer table; 36" W x 11' L return conveyor. -- Feed rollers driven by: DC Variable speed motor; helps guide the part onto the receiving module. -- Polymer belts side shift panels to: Return Conveyor quickly and efficiently.

DOUCET - BT 3-48: Return Conveyor for Edgebanders with Panel TurnerFor Left Hand feed Edgebanders with: Right Hand Return Conveyor. -- Receiving table: 66" L x 84" W; Return Conveyor: 48" W; total length: 24'. -- Unit can process 4-side panels up to: 66" Wide x 66" Long, w/o assistance. -- Unit can process Long panels up too: 66" Wide x 96" Long, w/o assistance. -- Unit can process 4-side panels up too: 48" Wide x 108" Long, w/Optional PT 90° panel Turner, w/o assistance (included). -- Minimum part capacity: 12" x 12" -- Minimum part capacity: 4" x 12" w/ Optional Panel Deviator For the side turner (included).

DOUCET - X 60: Finger Jointer Line for Medium Production"X 60 DG" Automatic feed Finger Jointer has Chain Feeding System: Driven on the bottom & right-and-left side; feeds board up to 6" max. width. Capacity -- 3/4" - 2" Max. thickness; 1-1/2" - 8" max. width with: Lugs on 11" centers; 5" min. - 48" max. material length. "X60" Right Hand Shaper Sections; equipped with: -- 5 HP Trim Saw; 3 HP scoring; 15 HP Shaper motor. -- PLC Controls on Shaper section. -- Dual feed chain with: Lugs on 11" centers; 10 - 75 FPM variable feed speed; 5 HP feed drive. -- Max. width: 8"; thickness from 3/4" to 3 1/2". -- PLC Controlled extrusion type Glue Applicator with: 12-Gal. tank; sound enclosure, & cabinet type base. - Transfer to the Assembly Press. Model "MP-32" Assembly Press -- 7' - 10' Max. in automatic mode & up to 20' in manual mode cutoff cap.; automatic cycling; 90 FPM powered infeed flat top chain with: Side alignment rolls to the preassembly tunnel. -- Pieces are fed through with: Bottom & side chain through the Cutoff Saw to a movable limit switch and cut to length; 5 HP upcutting Cutoff Saw for continuous assembly; 2" x 9" cap. with: 14" Blade; finished lengths are pushed out by the next piece onto material outfeed arms. -- PLC Controlled Press section; 10 HP Hydraulic unit; 10,000 Lbs max. pressure. -- Gluing system with pump.System Includes & Supplied with: -- Stainless friction plates on assembly table; board holddown on all (4) sides. -- Automatic ejection of finished board with table. -- 6-Bolt cutterheads for hardwood and softwood.Production Capacity: Approx. 8,000 linear ft./shift or more; based on 12" average infeed length.

DOUCET ERS-96/RS-75/AP-508 MULTI-BLADE PANEL GROOVE/RIP SAW SYSTEM:Specifications:• The Doucet ERS-96 / RS-75 / AP-508 Automated Panel GROOVE/RIP Saw System is designed to GROOVE and/or RIP panels as well as edge the sides of core materials. Ideal for plywood, OSB, MDF, HDF and other composite panels. This Line was originally designed for Engineered Flooring Blanks.Material Specifications:• 5x5 and 4x8 material to groove and rip for engineering floor core• Incoming panel thickness: ½" to 5/8"• Incoming panel sizes: nominal 5x5 and 4x8• Grooving pattern at every 4" center across the width of panel• Depth and width of grooves estimated at 3/16" kerf width by 1/8" deep• Ripping patter not mentioned• Maximum weight of stack: approx. 5,000 pounds per stackLine Consists of:• Doucet AP-508 Automatic panel feeder with scissor lift to automatically feed panels as needed• Cross Transfer Chain Conveyor to feed panels sideways by the long edge through the Groover• Doucet ERS-96 Panel Groover • Cross Transfer Chain Conveyor to feed panels short end wise through the panel rip saw• Doucet RS-75 Panel Rip Saw• Outfeed Lift Table to automatically stack ripped strips AP-508 Feed system:• (1) Doucet AP-508 Automatic panel feeder with Indexing scissor lift to automatically feed panels as needed.• (1) Cross Transfer Chain Conveyor to feed panels sideways by the long edge through the Groover, max width 96".• (1) Cross Transfer Chain Conveyor to feed panels short end wise through the panel RIPSAW, max. width 60" • (1) Outfeed Lift Table to automatically stack ripped strips. • 5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.• (4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.• Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning.• Maximum weight of stack: approx. 5,000 LBS.ERS-96 Panel Groover• 40 HP - 3,500 RPM belt driven saw arbor motor,• Material Width 96"; maximum.• Depth of cut 0.25" - 0.75" (6 - 19 mm) maximum.• 3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. • Saw arbor accessible from above for tool changes. • 5 HP - 1,750 RPM feed motor, feed speed up to 75 FPMRS-75 Panel Ripper:• 20 HP - 3,500 RPM belt driven saw arbor motor;• Material width cap. 60" maximum.• Strip width cap. 2.5" minimum.• Depth of cut 0.25" - 0.75" (6 - 19 mm) maximum.• 3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. • Saw arbor accessible from above for tool changes. • 5 HP - 1,750 RPM feed motor, feed speed up to 75 FPMOperator Interface: • Doucet OI/HMI Control System for automatic loading & stacking with minimal human intervention other than a forklift operator to bring in new material and remove the processed parts/strips.Complete with:• Dynamic saw arbor brake;• Infeed anti-kickback fingers;• Saw blade safety interlock cover; •12" dia. du

DOUCET MFE 300 Lateral chain feeder for moulders and optimizers -- 3'0" x 16'-0" working deck for material length 2'0" - 16'0"; width 2" to 9.5" and thickness 1/2" to 4". -- Feed system: Hydraulic variable speed 50-300 FPM with a 20 HP power unit. In-feed (4) roller accelerator; (2) top steel rollers and (2) bottom drive roller. Additional idler rollers along feed fence to support lumber during feeding. -- Chains: Transport length of lateral chain feeder 3'0". (8) strands of C2060 chains on pneumatic up/down device to release lateral pressure on board when feeding. -- Pedestal: Feeder controls mounted to pedestal with extended cable. Interface relay to stop feeder when moulder is stopped. -- Adjustments: Tool less adjustment handles for quick setups. Easy access to for thickness adjustments at front side of feeder. -- AVAILABLE OPTIONSOne (1) set of four (4) feeding wheels made of steel with hardenedsurface teeth $ 1 000.One (1) set of four (4) feeding flat wheels made of steel, 2" wide insteadof 1" for wide material feeding $ 500.One (1) set of four (4) feeding flat wheels made of steel 1" wide $ N/C.Guiding Tunnel between feeder and moulder,Standard Guiding Tunnel (4' long) $ 1 650.Standard Short Guiding Tunnel (32" long) $ 2 100.Complete Guiding Tunnel (4' long) $ 2 700.Complete Guiding Tunnel with adjustable fence (4' long) $ 3 800.Motorized Guiding Tunnel (4' long) on request.Additional chain transfer length capacity (up to a maximum of 6additional feet) For MFE-300-16 sold per foot $ 1 685. Note: More than 6 add. feet: price upon requestSteel plates between chainsFor MFE-300-16 $ 1 050.Platen chains recommended for softwood speciesFor MFE-300-16 $ 2 850.One (1) additional chain for shorter material down to $ 1 750.18" min. lengthPressurized lateral guide with roller bearing end $ 1 400.Powered lateral guide with roller and side guides on request.Custom working height on request.

DSI - LD-1: CNC Lockdowel PressSpecifications -- The DSI machine is designed to squeeze Lockdowel hardware into the edge of a predrilled panel. Lockdowel machines: (5+) Have years of actual factory usage and inserts (10s) of thousands of Lockdowels successfully, accurately, and quickly! Features. Heavy-Duty construction. No "compressed air requirements only." Single-phase 120 VAC. - A large powerful drive motor. Rack & Pinion: Movable fence, extruded aluminum beams, and cross members. Solid aluminum fences with full adjustment capability.Benefits. Low-cost alternative to those that have horizontal drilling capabilities and do not want to invest in substantially more expensive machines that both drill & insert.Immensely faster and much more accurate than hammering; Lockdowels in by hand: A (1 or 2) person operation.Up to (8) Lockdowels inserted per machine cycle. Safety: Compact, safe, and accurate. Machine functions are supervised by: Safety rated control system including: 2-handed cycle start operation required. Safety light curtains & conveniently located emergency stop buttons.Operator Interface. The DSI machine includes a large touchscreen for quick data entry and quick accuracy adjustments.Portable: The machine is on Heavy-Duty casters. The infeed table folds down and out of the way.

DSI LD-1 CNC LOCKDOWEL PRESS:Specifications -- The DSI machine is designed to squeeze Lockdowel hardware into the edge of a pre-drilled panel. Our machines have over 5 years of actual factory usage, inserting tens of thousands of Lockdowels successfully, accurately, and quickly!! Features: Heavy duty construction. No compressed air requirements-only single phase 120 VAC. A large powerful drive motor. Rack and pinion movable fence and extruded aluminum beams and cross members. A solid aluminum fences with full adjustment capability.Benefits: A low cost alternative to those which have horizontal drilling capabilities and do not want to invest in the substantially more expensive machines that both drill and insert.Immensely faster, and much more accurate than hammering the Lockdowels in by hand. One or two person operation.Up to 8 Lockdowels inserted per machine cycle. Safety: Compact, Safe, Accurate. Machine functions are supervised by a safety rated control system including: two handed cycle start operation required. Safety light curtains & conveniently located emergency stop buttonsOperator Interface: The DSI machine includes a large touch screen for quick data entry and quick accuracy adjustments.Portable: The machine is on heavy duty casters. The infeed table folds down out of the way.

DURA-QUIP - VC-3532 Vibrating Conveyor: -- Specifications: Dura-Quip 35"; wide X 41.25" High x 32’ long Vibrating Conveyor. Pan is 7"; deep and had ¼"; round hole punched plate in most of length to allow sawdust to drop outside of conveyor but has been recently removed during clean up. Buyer to replace screens. Bottom frame is filled with concrete 12"; deep. 10HP TEFC 460V drive motor. -- Note: Seller States, there is a piece of 2" channel welded on top, that is easily removed, this would get the "Height" down to 39.25" High.

DURAMAC - DUR52-2, ...2-Head Wide Belt Sander2-Head Wide Belt Sander with: Drum, combi-head, and brush cleaner. -- Max. working width: 52". -- Max. working thickness: 6". -- 23" Infeed load space. -- 50" Wide rubber conveyor belt size. -- 1st Head: Grooved rubber contact sanding drum; 40 HP, 230 Volt - 3-phase drive motor. -- 2nd Head: Combination contact drum & polishing platen; 30 HP, 230 Volt - 3-phase drive motor. -- Spring-loaded pinch rollers. -- Electronic belt tracking, pneumatic belt tensioning. -- (1) Rear top outfeed panel brush cleaning head, 0.5 HP, 230 Volt - 3-phase drive motor. -- Power raise & lower of worktable. -- Inverter driven feed works drive motor for variable speeds, 0 to 60 FPM. -- Front operator control station; motor ammeters. -- TOSHIBA Feedworks inverter. -- "DP-626S" electronic digital readout for setting table heightAlso Available: -- Transformer for 600 Volt operation, 112.5 KVA.

DUST TECHNOLOGY DT-250 Modular Dust Collector Free-standing self-contained internal air system, 25 HP Motor;Specifications: -- Rated for 9,800 CFM, 5-bag unit, 75 cu. ft. collection capacity. -- (5) Upper cloth filter bags with 165 sq. ft. filter area; 16" inlet dia., dust baffling system to fill bags evenly. Supplied with & Includes: -- 25 HP motor with magnetic starter, -- (5) Upper cloth filter bags and (5) lower plastic collection bags. -- (5) Double "T: Bolt straps. -- (5) Quick release metal straps. -- Roll of 50 Lower Plastic Dust Collection Bags, 24" Dia. X 72" Long.Three Year Comprehensive Warranty

DUST TECHNOLOGY DT-200 Modular Dust Collector Free-standing self-contained internal air system.Specifications: -- 20 HP Motor, rated for 7,500 CFM, 4-bag unit, 60 cu. ft. collection capacity. -- (4) Upper cloth filter bags with 132 sq. ft. filter area; 14" inlet dia., dust baffling system to fill bags evenly. Features & Includes; -- 20 HP motor, magnetic starter; -- (4) Upper cloth filter bags and (4) lower plastic collection bags. -- (4) Double "T": Bolt straps. -- (4) Quick release metal straps. -- Magnetic starterThree Year Comprehensive Warranty

DUST TECHNOLOGY DT-50 Modular Dust Collector5 HP BALDOR Motor, compact 2-bag free-standing & self-contained Heavy Duty Dust Collector, rated @ 2,400 CFM, 9" - 11" static pressure at fan. -- Equipped with: 10" Inlet dia., (2) Cotton Filter bags with 66 sq. ft. filter area and (2) Plastic Collection Bags w/ 30 cu. ft. collection capacity. -- (2) Double "T" Bolt Straps and (2) Quick Release Metal Straps. Includes: Magnetic Starter

DUST TECHNOLOGY DT-150 Modular Dust Collector Free-standing self-contained internal air system, 15 HP Motor, rated for 6,000 CFM, 4-bag unit, 60 cu. ft. collection capacity. -- (4) Upper cloth filter bags with 133 sq. ft. filter area; 14" inlet dia., dust baffling system to fill bags evenly. -- Includes: 15 HP motor, magnetic starter, (4) Upper cloth filter bags with 133 sq. ft. filter area and (4) lower plastic disposable collection bags

GIBEN G2 GENESIS 48 CNC ROUTER (ATC & BORING): 4' x 8' Fixed table; moving gantry machine with: Single zone vacuum table. -- Equipped with:(1) 12 HP, ANDI HSK-63F ATC spindle; air-cooled; ceramic bearings; variable spindle speed from: 6,000 - 24,000 RPM. -- 6-Station Automatic Tool Changer & 2 HP 9-spindle vertical drill bank (5 in X- & 4 in Y-Axis). -- Axis Stroke1,300 mm (51") In Y-Axis; 2,500 mm (98.4") in X-Axis; 200 mm (7.8") in Z-axis. -- Max. Feed Rate60 MPM (2,362 IPM) In X- & Y-axis; 30 MPM (1,180 IPM) in Z-axis. -- FeaturesTool Length Measuring System (Tool Touch Off device). -- ControlANDI/SYNTECH Controller with: Network compatible WINDOWS PC based front-end; color monitor; keyboard; mouse.Full function handheld pendant absolute & incremental programming; cutter & tool length compensation; feed rate & spindle speed override; inch/metric operation; linear/circular & helical interpolation. -- Complete with:10 HP BECKER Vacuum Pump; Tool Holder’s collets; Light safety fences. -- Maintenance supplies: Grease, grease guns; full manuals; product literature.

GIBEN - G4 EVO 510: CNC Router ATC & Boring: + Infeed, Rake & Offloading -- Specifications 5' x 10' "Matrix" grid Phenolic surface for "Nested Base Manufacturing". -- Working CapacityX-Axis 126" (3,200 mm); Y-axis 62.9" (1,600 mm); Z-axis stroke is 9.8" (250 mm); max. material thickness 4.7" (119 mm). -- Positioning Speed• X- & Y-Axis 262 FPM (80 MPM); Z-axis 98 FPM (30 MPM).• X- & Y-Axis use: Precision Rack & Pinion system; Z-axis uses precision ball screws.• All axes movement is on precision linear guides & ways and controlled by digital, brushless AC Servo motors.• All motion components are maintained by an automatic Lubrication System. -- Work Area• Flat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing".• (2) Side clamps + (4) external pneumatic pop-up stops for piece positioning at (4) corners of workstations; automatic NC controlled 8-zone vacuum table.• Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; with: "Quick Connect" vacuum outlet for custom vacuum pods & fixtures. -- Boring Unit• (1) 2-1/2 HP (1.7 kW) Motor; variable speed: Up to 6,000 RPM; "HSD" Boring unit.• (16) Independent vertical spindles with: (9) In X-axis & (7) in Y-axis. -- Machining• (1) 15 HP Air-Cooled "ANDERSON" Electrospindle with: HSK F63 Adaptor; RH & LH rotation; variable speed from 1,000 - 24,000 RPM.• (1) 8-Position ride-along ATC tool changer for "on the fly" ATC. • NC Controlled "touch off probe" tool presetting for the measurement of the tool length. -- Operator & Machine Control• PC Front-End with: ANDI/GIBEN "SYNTEC" + "WINDOWS" Operating System.• 19" LCD Flat screen monitor; server; full keyboard; mouse: All mounted on a mobile cart.• Intel(R) Core i CPU; 8 GB RAM memory; 500 GB (SSHD) hard disk; dedicated graphic card; DVD reader; USB ports; Ethernet card for network connection capabilities. • Automatic program update according to the tool length (touch off probe). -- Equipped with: • (2) 250 m³/Hr (9 HP) "BECKER" vacuum pumps • Automatic Lubrication system for: Linear guides, pads, & recirculating ball screw • Teleservice capabilities • Perimeter safety light bars & perimeter fencing • Manuals & Documents on CD. -- Options Include:• (1) NC Controlled infeed Scissor Lift table • (1) Vacuum loading device • (1) Rake system • (1) NC controlled & powered belt outfeed table with vacuum sweeping system. -- Actual Model is: GIBEN - G4 EVO 510

GIBEN - SMART 75 SP: Front-Load, Automatic Panel Saw: -- Specifications149" (3,800 mm) Overall cutting length; 131.8" (3,350 mm) pull back 2.95" (75 mm) max. blade projection.15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor; 3,800 RPM main saw blade; 6,000 RPM scoring blade with external adjustment. -- Saw CarriageVariable saw carriage forward speed: 16 - 164 FPM (5 - 50 MPM); return speed: 197 FPM (60 MPM).Rack & pinion drive; driven by AC brushless Servo motors. -- Pusher FenceElectronically controlled overhead program fence with: (7) Pneumatic gripper clamps; max. clamp opening: 2.56" (65 mm).Variable forward pusher speed: 2-1/2 - 82 FPM (0.8 - 25 MPM); return speed: 131 FPM (40 MPM).Pusher driven on round bar-ways by AC brushless Servo motors. -- Operator & Machine ControlPC Front-End with: Windows "XP" + "Pentium" processor Operating System with: Multitasking & easy programming of very complex cutting patterns.15" CRT Monitor displays: REAL TIME Graphics of cutting dimensions & patterns; program cutting list; manual cuts; diagnostic & online help.Data input by adjustable keypad pendant; standard industrial: Keyboard, mouse & CD-ROM drive; direct downloading from office PC is possible."MOELLER" PLC Guarantees full management of all machine movements (pressure beam; saw carriage; side aligner pusher positioning, etc.).The numerical control: Adjusts the optimum saw blade projection for the stack of panels being cut; sets the most appropriate cutting speed in relation to the stack itself (when necessary to the width of trim cut, too.) -- Rear of Machine(9) Rear support rails with: 80 mm Dia. roller modules; rear of machine enclosed for safety. -- Front of MachineAutomatic side/crosscut aligning device with: 2.4" - 48" (60 - 1,220 mm) stroke; 90" (2,300 mm) long crosscut fence (front-to-back).(1) Front-mounted air floatation table: 20" x 78" (510 x 2,377 mm) & (3) front-mounted air floatation tables: 20" x 60" (510 x 1,524 mm). -- Complete with:G-Lock "Quick Change" saw blade system. -- Actual Model: GIBEN SMART 75 SP.