JLT CLAMPS 717A-DC Cabinet Door Clamp:Pneumatically operated Cabinet Door Clamp to square & clamp door in (1) Second. -- 26" Front-to-back x 62" left-to-right clamping capacity. -- Single row door clamp with (1) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (3) Large diaphragm cylinders for quick clamping pressure with single lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing on all squaring components. -- 40 Sq. ft. floor space requirement.(Replaces: #79K-6-DC)

JLT Clamps 302-40-H-R DOOR AND PANEL CLAMP40" Capcity clamp (min 8-1/2") Patented Equalizer Design Provides Equal Clamping from the Front and Rear Jaws, Resulting in a Higher Quality Panel. #302 Style Clamp with Standard 3-1/2" High Jaws for Increased Durability and Less Clamps Per Glue Up.Also available with 36", 44" and 52" capacities.

JLT CLAMPS 78H-12-42-40 Mini Pod PressSingle section 12" wide x 42" long cap., 40" max. opening, 13" daylight, 30 ton max.,clamping pressure at 120 PSI, Pod Press is powered by a total of (18) 20 square inch diaphragm cylinders, upper platen has a 2" stroke when air is activated.Features: Heavy duty upper and lower steel platens, single lever valve pneumatic operation with dial regulator pressure controls, stack multiple wood components up to 12" wide and ships pre-assembled. Includes: Manual jack for platen adjustment.

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.

JOHN DEERE 470G LC Large Hydraulic ExcavatorSpecifications: -- Max. digging depth: 27'-2" to 29'-11" -- Engine: JOHN DEERE 6135HT997 -- Displacement: 13.5 L -- Cylinders: 6 -- Fuel type: Diesel -- kW: 560 -- Transmission: Hydrostatic 2-speed travel -- Tracks Width: 35-1/2" -- Stick length: 12'-5" -- Quick coupler: Hydraulic -- Bucket width: 60" -- Hours: 4,602Equipped with: -- TOPCON 3DMC Control -- Operators station: EROPS -- AC and Heat -- Grade control -- Counterweights -- Auto lube -- Cutting Edge: Weld-On -- Grouser Pads: Triple

JOHN DEERE 210G ExcavatorSpecifications: -- Engine: 159 HP at 1,900 rpm -- Max. Travel Speed Low 2.2 mph / High 3.4 mph -- Bucket size: 42" -- Fuel Tank: 06.5 gal -- Undercarriage: 85% -- Hours: 2,540Equipped with: -- Hydraulic thumb -- Quick coupler -- Back-up camera -- Pre-emissions -- Heat / AC -- Recent service -- New batteries

JOHN DEERE 550K Crawler DozerThe John Deere 550K is a crawler dozer with a Power-Angle-Tilt (PAT) blade.Specifications: -- Engine: PowerTech PWS 4045 engine (turbocharged) -- Displacement: 4.5L (276 cu. in.) -- Net Rated Power: 92 HP at 2,200 rpm (69 kW) -- Transmission: Hydrostatic -- Blade Type: Power-Angle-Tilt (PAT) -- Blade size: 105" (2.67 m) -- Maximum Travel Speed: 8.0 km/h (5.0 mph) - Maximum (optional) 9.7 km/h (6.0 mph) -- Operating Weight (with standard equipment): 7718–8279 kg (17,016–18,252 lb.) -- Fuel Tank Capacity: 234 L (61.9 gal.). -- Hours: 1318Equipped with: -- Air conditioning and heated Cab -- Power-Angle-Tilt (PAT) blade -- Rock guards

JOHN DEERE 324K Compact Wheel LoaderProductive for tight turns and extra agility in close quarters.Specifications: -- Engine Power: 70 HP -- Engine type: YANMAR Diesel -- Full-turn tipping load: 9,766 Lbs -- Bucket capacity range: 1.4–2.0 cu. yd -- Bucket breakout force: 2,364 Lbs -- Operating weight: 14,087 Lbs

JOHNSON LOOSE BAGGING SYSTEMOne Set of (2) Loose Fill Bagging Systems -- Was Bagging Wood Chips in Plastic Bags. -- One Hopper receiving System for the (2) Units -- Two feeding systems -- Complete with Support Legs and Bag Conveyor -- Output Finish Bag Conveyors -- One Unit is Brand New and the Other is in Very Good Working Condition -- Production Rate 6 to 10 Bags Per Minute. -- Could Bag any Type of Free Flowing Material.Price is Loaded on your Truck.

50 HP Jordan Dual Shaft Shredder with Infeed Conveyor --Overall Length 141" --Overall Width 56" --Overall Height 98" --Cutting Chamber Size 42"x20" --Hopper Size 1.5 - 2 Cubic Yard --Cutter Assembly Height 13.5" --Motor Horsepower 50HP --Approx Chamber Weight 4570 Lbs --The MS-4220 is our most popular mid range shredder, with the power to handle your tougher jobs and a cost that can fit into your demanding budget. The MS-4220 can be used to shred paper, plastic, passenger tires, carpet and an many other materials. It is designed with counter rotating dual speed shafts and the cutting group continuously changes knife tip position. This helps the knives grab and pull through hard to hold materials. The MS-4220 Industrial Shredder offers mid size chamber capacity and the horse power to handle many of the most demanding applications. For a cost effective shredder, this unit can’t be beat for volume reduction and material shredding. The MS-4220 Industrial Shredder is a work horse.

JV MANUFACTURING - HE-60 BIG MOUTH: Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6". -- Main motor: 20 HP. -- Bale size: 60"; x 30"; x 48";. -- Cycle Time (No Load): 47 Seconds. -- Platen Force:120,600 Lbs normal; 140,800 Lbs max. -- Hydraulic Cylinder Bore Diameter: 8";. -- Hydraulic Cylinder Stroke: 84";.Equipped with: -- Conveyor hopper. -- Heavy-Duty operator controls.NOTE: Back cover is included.

JV MANUFACTURING SC-T2-34 Self-Contained Compactor with Cart TipperSpecifications: -- Feed opening: 58" x 41" -- Cylinder: (2) 4" -- Main motor: 10 HP -- Capacity: 34 yd.Equipped with: -- Rear hydraulic Cart Tipper -- Universal rails

JV MANUFACTURING - PH-04, ...Pre-Crusher CompactorSpecifications: -- Hydraulic Cylinder: 7" -- Charge Box Capacity: 4 Cu.yd -- Cycle Time: 56 Sec -- Total Force: 77,000 Lbs -- Ram Face Dimensions: 60" x 35" -- Motor: 20 HPEquipped with: -- Rear Deck

(2) JV MANUFACTURING - VB-60-B & VB-72-B, ...Vertical Balers Lot: (2) Vertical Balers in great working condition!Specifications: -- Cylinder: 6" -- Main motor: 10 HPEquipped with: -- ANSI Z245.5 Compliant -- Key operated controls -- Quiet operating Vane Pump -- Gas spring assisted Loading Door

JV MANUFACTURING - HE-60 BIG MOUTH, ...Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60"; x 30"; x 48"; -- Feed opening: 18,000 LbsEquipped with: -- Conveyor hopper -- Factory infeed conveyor -- Full penRefurbished work. New: Guides, press head cover, main door hinge pin, main door patch pin, oil & filters, hoses as required, seals in control manifold, belt on conveyor, drive chain, and sprockets on conveyor.Rebuilt: Cylinders, door latch cylinder, shear blades sharpened and adjusted. - Gear oil changed in conveyor drive.

JV MANUFACTURING MODEL - CC-02: Stationary CompactorSpecifications: -- Charge box capacity: 2 Cu/Yards. -- Clear Top opening: 40" x 58-1/2". -- Average cycle time: 63 Sec. -- Total normal force: 56,500 Lbs. -- Max. total force: 67,900 Lbs. -- Normal ram pressure: 33 PSI -- Max. ram pressure: 39.7 PSI.Equipped with: -- Standard 3-button controls. -- Heavy-Duty structural steel components and welded by AWS Certified Welding Technicians.Designed for: &#9679 Retailers &#9679 Hospitals &#9679 Hotels &#9679 Distribution Centers &#9679 Manufacturing Centers &#9679 Recycling Centers &#9679 Home Centers