EX-FACTORY INC.
EX-FACTORY INC.
 704-841-2001

Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 25
490 Results Found
Sort By 
EX-FACTORY-INC
 704-841-2001
Diehl SL-55  Straight Line Rip
$11,520

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

 704-841-2001

 Call
Diehl SL-55  Straight Line Rip
$16,760

DIEHL 55 Straight Line Ripsaw:Specifications -- 15HP - 3,450 RPM Direct drive arbor motor, -- 2" dia. arbor, 18" blade cap., 4" max. depth of cut, -- 12" min. part length, -- 21-1/2" width of table to the right of blade & 30" to the left, 43" table length. -- 2 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; twin chain drive,Equipped with & Features -- Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade. -- All cast iron machine -- Runs very nice --Complete with: Rip fence,.

 704-841-2001

 Call
Diehl SL-55  Straight Line Rip
$9,800

DIEHL - 55" - Straight Line RipsawSpecifications -- 15 HP - 3,450 RPM Direct drive arbor motor. -- 2" Dia. arbor; 18" blade cap.; 4" max. depth of cut. -- 12" Min. part length. -- 21-1/2" Width of table to the right of blade & 30" to the left; 43" table length. -- 2 HP 4-Step feed drive; 30 - 50 - 75 & 120 FPM; twin chain drive.Equipped with & Features -- Automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over blade. -- All cast iron machine. -- Runs very nice. -- Complete with: Rip fence.NOTE: Conveyor NOT included.

 704-841-2001

 Call
Diehl SL-55  Straight Line Rip
$7,970

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

 704-841-2001

 Call
Diehl SL-62-WA  Straight Line Rip
$23,625

DIEHL - SL-62WA: Straight Line Rip Saw (Wide Arm Model)20 HP Main saw motor; 2" arbor.The chain on this "SL-62 WA" has": 90% + Chain life or better left. - This is a "Glue Line" capable machine.Specifications --Table measures: 95″ x 79″; Fence locks: 56″ To the right of the blade with 56" total of clearance from the right of the blade to the upright supports. -- 4-1/4" Max. depth of cut. -- Stock thickness cap.: 1/8" Min. to 4-1/4" max. -- Everything raises & lowers throughout its range very easily.Feed -- 2 HP Variable speed feed: 65 to 195 FPM. -- Automatic Lubrication System. -- Automatic chain oiler.Equipped with & Features -- Spring-loaded rip fence. -- Anti-splinter kickback fingers. --Front push button controls. -- Laser light.

 704-841-2001

 Call
2026 Diehl SL-65-19  Straight Line Rip
Call for Price

DIEHL SL 65-19 Straight Line Rip Saw: 20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; Features: -- 3 HP - 1,800 RPM Feed drive, variable feed speed of 70 - 200 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. Equipped with: -- Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table. -- Pressure beam outfeed guard with pivoting side pressure. -- Automatic pneumatic lubrication of feed chain & race. -- Full overload & under voltage protection. -- Automatic brake for arbor protection, and pressure bar curtain. Option: Diode laser & mounting bracket, please add ...$ 1,745.

 704-841-2001

 Call
2026 Diehl SL-65-24  Straight Line Rip
Call for Price

20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; 3 HP - 1,800 RPM feed drive, variable feed speed of 70 - 200 FPM. -- 24" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Option: Diode laser & mounting bracket, please add ...$ 1645.

 704-841-2001

 Call
Dixie Air 15 HP  Dust Collection System
$6,950

DIXIE - 15 HP: Dust Collector Specifications -- 15 HP Motor. -- 1,760 RPM. -- Air Pulse filter bag cleaning System. -- (2) Bottom outlets. -- 15" Diameter: Inlet pipe size. -- Wall-mounted motor control station. -- Overall Collector footprint: 90" Wide x 67" deep (101" with rear-mounted fan) x 122" high.

 704-841-2001

 Call
Donaldson Torit DMC-C  Dust Collection System
$1,900

DONALDSON/TORIT - DRYFLO DMC-C: 3 HP Mist CollectorSpecifications -- Filter area: 13 m² (42 sq./ft.).

 704-841-2001

 Call
2022 Donaldson Torit DWST6-5  Dust Collection System
$61,750

DONALDSON / TORIT DWST6-5 Cartridge Dust CollectorDownflo® WorkStations (DWST) fit anywhere on the plant floor and apply NO restrictions to worker movements or visibility. The full line of WorkStations are designed specifically for those in-plant areas where dirty and/or noisy operations are out in the open—grinding, sanding, chipping, batch mixing or welding. The DWST delivers exceptional performance in metalworking, woodworking, and process applications where high filtration efficiency and ledge less construction is often a requirement. Specifications: -- (5) Module System, each with 10 HP motor, 7,000 CFM. -- (4) Ultra-Web cartridges. -- Pulse-cleaning manifolds and ventures, (2) dust drawers. -- (1) Acoustical panel per module. Louvers mounted on lower section of unit.Includes: -- (1) IEC control panel includes 460-volt motor starters, circuit protection for each motor, transformer, programmable logic controller. -- Magnehelic gauge mounted in a panel door, start/stop buttons, and a through-the-door disconnect switch. -- Pulse cleaning can be continuous or after-shift. -- All components are IEC rated. The enclosure is rated Type 12. -- 1"; Compressed Air Regulator with Filter Separator and Gauge, Black Iron Fittings, and Black Iron Piping Required for Cleaning System. -- Provides a 1"; Common Connection Point for Design Shutters to Tie into with Existing Compressed Air System.

 704-841-2001

 Call
2012 Donaldson Torit WSO 20  Dust Collection System
$3,750

DONALDSON/TORIT - WSO 20: 1,230 CFM, 3 HP Floor Mounted Mist Collector with After-FilterSpecifications -- Filter height: 20".Complete with: -- Top-Mounted after-filter.

 704-841-2001

 Call
Doucet ERS-96/RS-75  Gang Saw
Call for Price

DOUCET ERS-96/RS-75/AP-508 MULTI-BLADE PANEL GROOVE/RIP SAW SYSTEM:Specifications:• The Doucet ERS-96 / RS-75 / AP-508 Automated Panel GROOVE/RIP Saw System is designed to GROOVE and/or RIP panels as well as edge the sides of core materials. Ideal for plywood, OSB, MDF, HDF and other composite panels. This Line was originally designed for Engineered Flooring Blanks.Material Specifications:• 5x5 and 4x8 material to groove and rip for engineering floor core• Incoming panel thickness: ½" to 5/8"• Incoming panel sizes: nominal 5x5 and 4x8• Grooving pattern at every 4" center across the width of panel• Depth and width of grooves estimated at 3/16" kerf width by 1/8" deep• Ripping patter not mentioned• Maximum weight of stack: approx. 5,000 pounds per stackLine Consists of:• Doucet AP-508 Automatic panel feeder with scissor lift to automatically feed panels as needed• Cross Transfer Chain Conveyor to feed panels sideways by the long edge through the Groover• Doucet ERS-96 Panel Groover • Cross Transfer Chain Conveyor to feed panels short end wise through the panel rip saw• Doucet RS-75 Panel Rip Saw• Outfeed Lift Table to automatically stack ripped strips AP-508 Feed system:• (1) Doucet AP-508 Automatic panel feeder with Indexing scissor lift to automatically feed panels as needed.• (1) Cross Transfer Chain Conveyor to feed panels sideways by the long edge through the Groover, max width 96".• (1) Cross Transfer Chain Conveyor to feed panels short end wise through the panel RIPSAW, max. width 60" • (1) Outfeed Lift Table to automatically stack ripped strips. • 5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.• (4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.• Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning.• Maximum weight of stack: approx. 5,000 LBS.ERS-96 Panel Groover• 40 HP - 3,500 RPM belt driven saw arbor motor,• Material Width 96"; maximum.• Depth of cut 0.25" - 0.75" (6 - 19 mm) maximum.• 3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. • Saw arbor accessible from above for tool changes. • 5 HP - 1,750 RPM feed motor, feed speed up to 75 FPMRS-75 Panel Ripper:• 20 HP - 3,500 RPM belt driven saw arbor motor;• Material width cap. 60" maximum.• Strip width cap. 2.5" minimum.• Depth of cut 0.25" - 0.75" (6 - 19 mm) maximum.• 3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. • Saw arbor accessible from above for tool changes. • 5 HP - 1,750 RPM feed motor, feed speed up to 75 FPMOperator Interface: • Doucet OI/HMI Control System for automatic loading & stacking with minimal human intervention other than a forklift operator to bring in new material and remove the processed parts/strips.Complete with:• Dynamic saw arbor brake;• Infeed anti-kickback fingers;• Saw blade safety interlock cover; •12" dia. du

 704-841-2001

 Call
2026 Dust Technology DT- 50  Dust Collection System
Call for Price

DUST TECHNOLOGY DT-50 Modular Dust Collector5 HP BALDOR Motor, compact 2-bag free-standing & self-contained Heavy Duty Dust Collector, rated @ 2,400 CFM, 9" - 11" static pressure at fan. -- Equipped with: 10" Inlet dia., (2) Cotton Filter bags with 66 sq. ft. filter area and (2) Plastic Collection Bags w/ 30 cu. ft. collection capacity. -- (2) Double "T" Bolt Straps and (2) Quick Release Metal Straps. Includes: Magnetic Starter

 704-841-2001

 Call
2026 Dust Technology DT- 75  Dust Collection System
$7,715

DUST TECHNOLOGY DT-75 Dust Collector7.5 HP BALDOR Motor, compact 3-bag free standing & self-contained heavy-duty dust collector, rated @ 3,450 CFM, 9" - 11" static pressure at fan. -- Equipped with: 12" Inlet dia., (3) upper filter bags with 99 sq. ft. filter area (patented BEANE bags designed to be 99% efficient to .5 microns). -- Dynamically balanced sand cast poured aluminum high quality impeller with easy access; 45 Cu. ft. collection cap., dust is collected in 6-mil thick clear plastic or canvas collection bags for easy disposal or reuse, a unique adjustable baffling system assures even filling of bags. -- Includes: Manual motor starter with thermal overloads & push button station.

 704-841-2001

 Call
2026 Dust Technology DT-100  Dust Collection System
$8,090

DUST TECHNOLOGY DT-100 Dust Collector3-Bag free-standing & self-contained heavy-duty dust collectorSpecifications: -- 10 HP BALDOR Motor, compact 3-bag free standing & self-contained heavy-duty dust collector, rated @ 4,450 CFM, 9" - 11" static pressure at fan. Equipped with: -- 12" Inlet dia., (3) cotton needle felt upper filter bags with 99 sq. ft. filter area or patented BEANE bags designed to be 99% efficient to 0.5 microns. -- Dynamically balanced sand-cast poured high-quality aluminum impeller with easy access; 45 Cu. ft. collection capacity. -- Dust is collected in 6-mil thick clear plastic or canvas collection bags for easy disposal or reuse, a unique adjustable baffling system assures even filling of bags. -- Includes Push-button Magnetic starter control.Dimensions: 24" Deep x 136" High x 107-1/2" Length; Weighs (810) Lbs.

 704-841-2001

 Call
2026 Dust Technology DT-150  Dust Collection System
Call for Price

DUST TECHNOLOGY DT-150 Modular Dust Collector Free-standing self-contained internal air system, 15 HP Motor, rated for 6,000 CFM, 4-bag unit, 60 cu. ft. collection capacity. -- (4) Upper cloth filter bags with 133 sq. ft. filter area; 14" inlet dia., dust baffling system to fill bags evenly. -- Includes: 15 HP motor, magnetic starter, (4) Upper cloth filter bags with 133 sq. ft. filter area and (4) lower plastic disposable collection bags

 704-841-2001

 Call
2026 Dust Technology DT-200  Dust Collection System
$11,332

DUST TECHNOLOGY DT-200 Modular Dust Collector Free-standing self-contained internal air system.Specifications: -- 20 HP Motor, rated for 7,500 CFM, 4-bag unit, 60 cu. ft. collection capacity. -- (4) Upper cloth filter bags with 132 sq. ft. filter area; 14" inlet dia., dust baffling system to fill bags evenly. Features & Includes; -- 20 HP motor, magnetic starter; -- (4) Upper cloth filter bags and (4) lower plastic collection bags. -- (4) Double "T": Bolt straps. -- (4) Quick release metal straps. -- Magnetic starterThree Year Comprehensive Warranty

 704-841-2001

 Call
2026 Dust Technology DT-200  Dust Collection System
Call for Price

DUST TECHNOLOGY DT-200 Modular Dust Collector W/ Chip TransferFree-standing self-contained internal air system.Specifications: -- 20 HP Motor, rated for 7,500 CFM. -- (4) Upper cloth filter bags with 132 sq. ft. filter area; 14" inlet dia., dust baffling system to fill bags evenly. Includes; -- (2) Rotary Air Lock units with hoppers. 8" Bottom discharge openings. -- (1) Fan box (DT-FB-100) w/ 10 HP, 4,450 CFM blower unit w/ 12" main inlet diameter. -- (1) Master control panel. Made in the USA. Three Year Comprehensive Warranty

 704-841-2001

 Call
2026 Dust Technology DT-250  Dust Collection System
Call for Price

DUST TECHNOLOGY DT-250 Modular Dust Collector Free-standing self-contained internal air system, 25 HP Motor;Specifications: -- Rated for 9,800 CFM, 5-bag unit, 75 cu. ft. collection capacity. -- (5) Upper cloth filter bags with 165 sq. ft. filter area; 16" inlet dia., dust baffling system to fill bags evenly. Supplied with & Includes: -- 25 HP motor with magnetic starter, -- (5) Upper cloth filter bags and (5) lower plastic collection bags. -- (5) Double "T: Bolt straps. -- (5) Quick release metal straps. -- Roll of 50 Lower Plastic Dust Collection Bags, 24" Dia. X 72" Long.Three Year Comprehensive Warranty

 704-841-2001

 Call
2026 Dustex AGXX  Dust Collection System
Call for Price

DUST-EX AG22 Abort Gate/Valve.... Automated two-way air stream diverter valve which prevents fires and explosions in dust collection systems and reduces the risk of fire in explosive prone work environments. A "safety measure essential" when clean air is returned to a building. -- Consists of: A lever arm that automatically directs a flapper damper in two different directions. -- Normal Position: The damper stays in a horizontal position (open) allowing the air stream to be directed/returned to the building -- Abort Mode: In the event of a spark originating upstream of an outside dust collector, a Spark Detection Sensor positioned in the air stream inside the building, sends a signal to de-energize an electro-magnetically controlled latch.The flap of the valve is very quickly switched to the abort/second position (closed) thereby diverting the explosion pressure/air stream to the atmosphere. Thus the inside work environment is protected from the explosion. -- All (3) flanged connections are 22" x 22'" square. Note for the clean air return a 24"x24" is suggested , to keep the flow down. -- Construction: Damper assembly is fully bolted to provide solid, reliable operation. -- The power adapter for the independent power supply is extra. -- Overall dimensions: 60" long x 36" wide x 43" high. -- Includes: Base Unit. Magnet. NO Controls. No reset (not legal). -- NFPA Certified.MANY SIZES AVAILABLE. PLEASE INQUIRE!Improve the safety of your work environment & help comply with NFPA codes!

 704-841-2001

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved