WEIMA WLK 13 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 51" x 47" hopper opening (straight sided), 2 cu. yds. cap.; 368 mm (14.5") rotor dia. x 51.2" rotor length; 60 HP motor and hydraulic ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (68) welded knife holders, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear; drop out discharge, lift up door for easy purge cleaning when used in plastics application. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Features: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

WEIMA WLK 4 Vertical Hopper-Fed, Low-Noise GrinderSpecifications: -- 31-1/2" x 39" Hopper opening at the top, 1.1 cu. yds. cap. Features: -- 30 HP rotor motor, Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. Equipped with: -- (14) Replaceable back bolt-on cutter knives, welded knife holders standard, recessed concave cutters with low clearance over the 10" dia. rotor extends cutter life, protects the bolts, and reduces machine wear. -- 6" Dia. dust collection outlet (1,200 CFM required); 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content); -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, the lateral force on the ram is minimized by a unique "U-Joint" mounting system. Includes: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for an additional charge). Options: -- Flared hopper, log Spacer, 2nd row of knives, material discharge auger; programmable logic controls;

WEIMA - WLB 400, ...Horizontal Low Speed Grinder Equipped with: -- 25 HP Rotor motor; rotor with (18) 4-way indexable, replaceable cutter knives. Features: -- Top infeed roller; 15-1/2" x 2-1/2" feed opening; Heavy-Duty Industrial Grade construction with stress relieved shell and frame; Heavy-Duty outboard roller bearings; separate electrical control panel. Complete with: -- 8" Dia. collection outlet; 3/4" screen.

WEIMA C 150 Briquette PressSpecifications & Features: -- Produces 2" (50 mm) dia. Briquettes; -- Hopper opening of 41" x 41" (1,040 x 1,040 mm); hopper volume 1.43 cu/yd (1.1 cbm). Equipped with: -- 9 HP Hydraulic motor; 0.75 HP auger motor; hydraulic oil volume of 26.4 gallons (100 liters). -- Vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material; extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio at 2,600 PSI; hourly output up to 80 - 120 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors").Features: -- Briquette length control, chrome plated clamp, oil level switch, control panel side-mounted to hopper, and overheating protection for hydraulic oil. Solid German engineering. - Freight, start-up, discharge pipes, etc. not included.

WEIMA TH 1500 M Briquette Press (Square Brick)Specifications: -- Produces 5.9" x 2.3" (150 x 60 mm) rectangular briquette; hopper opening of 55" x 55" (1,400 x 1,400 mm); hopper volume of 2.46 cu/yd (1.88 cbm). -- Equipped with: -- 40 HP Hydraulic motor; 2.6 HP auger motor; 3.0 HP agitator motor; hydraulic oil volume of 264 gallons (1,000 liters). -- Volume reduction from chip/dust to block up at a 10:1 ratio; hourly output up to 800 - 900 Lbs. -- Features: -- Conical shaped agitator with curved hopper corners, "Bridge Breaker" mounted on agitator; automatic "On/Off" integrated in feeding hopper; hydraulic oil cooling, overheating protection for hydraulic oil. -- Complete with: -- Touch-Screen control panel on swivel mount; discharge ramp for briquette extraction, chrome plated clamp, and an oil level switch. -- Solid German engineering.

WEIMA TH 814 Briquetter A volume reduction of 90% is possible through the briquetting of wood, paper, aluminum and biomass or synthetics, providing significant savings in labor, disposal and storage costs.Material is hand fed or by dust system into the hopper, where an agitator pulls it into the auger and pressing chamber. Specifications: -- Produces 80 mm (approx. 3.1") dia. compacted logs; approx. 2.4 cu. yd. (55.1 x 55.1 x 37") square vertical hopper, 18 HP motor. -- Hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio; approx. hourly output between 300 - 400 Lbs/Hr.Features: -- Auto on/off integrated into feeding hopper; automatic briquette length adjustment; conical-shaped agitator; dust connection at pressing unit.Options: -- Hydraulic cooling for 24-hour operation, heating for cold weather start-ups; plastic tubing discharge into Gaylord or carousel bagging system. .

WEIMA TH 714 Briquette Press (Cylindrical)Produces 2-3/4" (70 mm) dia. x 4" (100 mm) long compacted logs. -- Specifications: -- Approx. 1.4 m³ vertical hopper, 18 HP (13.5 kW) motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Approx. hourly output between 240 - 280 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors"). -- Equipped with: -- Centralized control panel for easy operation, MITSUBISHI Logic control & solid German engineering. -- Complete with: -- Auto on/off switch, auto length adjustment, & oil level sensor. -- Optional:: -- Hydraulic oil heater, hydraulic oil cooler, transfer piping and customization to customer material handling.

WEIMA TH 514 Briquette Press (Cylindrical). Produces 2" (50 mm) dia. x 4" (100 mm) long compacted logs. Specifications: -- Approx. 1.4 m³ vertical hopper, 12 HP (9 kW) motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Approx. hourly output between 80 - 120 Lbs/Hr. ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors"). Equipped with: -- Centralized control panel for easy operation, PLC Logic control & solid German engineering. Complete with: -- Auto on/off switch, auto length adjustment, & oil level sensor. Optional: -- Hydraulic oil heater, hydraulic oil cooler, transfer piping and customization to customer material handling.

WEIMA TH 1200 Briquette Press (Square Brick)Specifications: -- Produces 5.9" x 2.3" (150 x 60 mm) rectangular briquette; hopper opening of 55" x 55" x 37" (1,400 mm x 1,400 mm x 950 mm); hopper volume of 2.46 cu/yd (1.88 cbm), (2,000 x 2,000 mm available). -- Equipped with: -- 35 HP Hydraulic motor; 2.6 HP auger motor; 3.0 HP agitator motor; hydraulic oil volume of 158 gal. (600 liters). -- Volume reduction from chip/dust to block up at a 10:1 ratio; hourly output up to 1,000 lbs/hr (depending on material and moisture content). -- Features: -- Conical shaped agitator with curved hopper corners, automatic briquette length adjustment; automatic "On/Off" integrated in feeding hopper; hydraulic oil cooling, overheating protection for hydraulic oil. -- Complete with: -- Touch-Screen control panel on swivel mount; dust connection at pressing point.

WEINIG RAIMAN PROFIRIP 450M And Combiscan EVO Luxscan Lumber Scanner SystemThe system is complete with: -- (1) Weinig lateral lumber feeder table to scanner head -- 12" wide rubber belted infeed -- Roller/Sweep type lateral conveyor with sequencing and buffer to scanner infeed -- (1) Weinig CombiScan EVO Luxscan Line Feed through lumber scanner -- Model CombiScan EVO -- Max width 310 mm (12.2") -- Min width 25 mm (0.984") -- Max length 6500 mm (255.9") Min length 900 mm (35.4") -- Max thickness 100 mm (3.93") -- Min thickness 12 mm (0.472") -- Speed range 80 to 300 m/Min (up to 250 boards/min) -- Max throughput 200 m/Min -- Luxscan combiscan EVo R with two cameras, top-bottom (2 side detection laser cameras, 2 side detection color defect high-resolution cameras, 2 side detection with dot laser, 2 side line scatter, angle crack detection 2 side) -- Freestanding operator computer control station -- Flat screen color display with keyboard -- Opticore direct controls -- Freestanding electrical and computer control cabinet -- Freestanding chiller unit for laser system -- Scanner infeed and outfeed table system -- Safety guards with access doors around the scanner and rip line machines -- Includes the machine operators' manuals -- (1) Weinig sweep type lateral conveyor table from scanner to the rip sequencer table -- Chain deck type sequencing and spacing conveyor table -- Infeed rip saw board flipper with servo fence system to rip saw -- (1) Weinig Raimann ProfiRip 450M Gang Rip Saw With (2) Movable blade -- 51 kW, 460 V, three-phase, 60 Hz -- Max cutting width 450 mm (17.7") -- Max cutting height (with 450 mm diameter blade and without pressure board) 150 mm (5.9") -- Max cutting height (with 450 mm diameter blade and with pressure board) 135 mm (5.31") -- Min. cutting thickness: 15 mm (0.59") -- Min cutting length 780 mm (30.7") -- Chain width 470 mm (18.5") -- Diameter of saw arbor 65 mm (2.55") -- Min blade diameter 300 mm (11.8") -- Max blade diameter 450 mm (17.7") -- Saw blade bore 80 mm (3.14") -- Arbor speed 3900 RPM -- Feed speed range: 15 to 120 m/Min -- Machine weight 4500 Kg (9920 Lbs) -- Saw drive motor 45 kW, 460 volt three phase -- Feed motor 4 kW, 460 V, three-phase -- (1) Fixed and (2) movable saw blade design -- Edging removal system -- Sound and safety machine enclosure -- Front access door with inspection window and safety interlock -- Freestanding operator computer control station -- Pro-Face color touch screen display -- Joystick movable blade controls -- Freestanding electrical control cabinet -- Includes the machine operator's manuals -- (1) Weinig rip saw outfeed table with lateral feeder to chop saw station -- Outfeed roller/sweep type conveyor -- Cross conveyor table with servo accelerator -- Freestanding operator conveyor system controls (zone ripping)Note: System installed new in 2019 and sells for a fraction of new.

WEINIG - VALU-RIP: Infeed Conveyor System for Rip Saw Specifications -- 7-Chain Deck; spaced at: 0", 25", 54", 75", 96", 120", 147". -- (5) Board stops on Chain Deck. -- Roller Deck with: (7) Drop chains. -- (8) 50" Rollers; powered by: 2 HP Motor. -- Drop Chains spaced at: 0", 36", 54", 72", 110", 147", 181-1/2". -- Automatic Saw Fence with: TISFOON Scanning System. -- Powered Pinch Roll before Saw: 2 HP Motor.NOTE: This is part of a Total Plant Liquidation; please call for details!

WILLIAMS - C 32 100: HP Hammermill(20) Lbs Hammers: (22) Total Hammers.1" Slot screens.Soft start: Included.Opening: 32" x 19".Video available of operation.32" x 19" Opening.Comes with: 100 HP - 1,800 RPM motor.Includes: Direct drive with Integrated base; infeed chute.

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Section of WIREWAY HUSKY Teardrop Pallet Racking Equipped with: (4) 18,000 Lb. Cap. 8-1/2’ H x 3-1/3’ W Teardrop vertical frames, with 3” W x 1-5/8” Thick Frame beams, Step beams vertically adjustable on 2" Centers. (8) 9’ L x 4-3/8” H x 2-5/8” D Step beams, with 1-3/8” H x 1” D Step.

Wm. B. MERSHON 36" Vertical Band Resaw w/Feeder.Technical details: -- 36" dia. wheels; 20 HP motor, on floor does not require pit for bottom wheel. -- Wheel width 4" face. -- Saw blade 18'-3-1/2" long; spoked wheel on top, solid bottom wheel; block lower guide, dowel on top. Feed System: -- 4-Speed, 120 volt electric feeder.Includes: -- Blade mister.

WULFTEC - WLP-200: Stretch Wrapper w/Turntable Heavy-Duty high-profile Pallet Wrapping Machine designed to be a workhorse. WULFTEC builds the most rugged Pallet Wrapping Machinery in the world. Designed to handle up to (25) loads/hour. Ideal for companies that will be loading with Fork Lifts. This machine is Fork Lift portable. It will take you less than (5) minutes to move this machine from one location to another. Specifications -- Max. load size: 56" W x 56" L x 76" H. -- Max. load capacity: 4,000 Lbs. -- Auto-height sensing photo eye with on/off switch. -- 20" No-Thread powered prestretch. -- Variable prestretch percentage. -- Separate up & down carriage speeds. -- Separate top & bottom wrap selectors (0 - 9). -- Reinforced wrap/manual rotation control. -- Film force to load control. -- Turntable: 52" x 52" x 3/8" Formed steel octagonal table. -- Variable turntable speed (0 - 12 RPM). -- Push-button and selector switch operation.

WULFTEC WSML-150-B Semi-Automatic, Low Profile Stretch WrapperSpecifications: -- Production Rate: 50-55 loads per hour. -- Load Size: 50" x 50" x 80"; (70.7"; diagonal). -- Wrap Height: 80". -- Load Weight: 4000lbs. -- Turntable: 58" dia. 3/8" steel plate. --Approximate Shipping Weight: 2200 lbs.

Yasuda ISG-202/RF-LS GANG RIP SAW ( Roll Feed )49" arborFeed speed Variable New still in original shipping crate , never been usedGang Rip Saw - ISG Series-Ability to Choose Feeding Type from the Slat or Rollers -Straight Line Processing with High Accuracy by Caterpillar Chain(for the -Slat ...Key Features of the Yasuda ISG Gang Rip Saw:Feeding Method: caterpillar chain mechanism for stable feeding of slats.Precision: Designed for high-precision, linear processing, making it suitable for panel processing, laminating, and flooring.Spindle Design: Spindles can be configured in up or down positions relative to the pass line.https://www.youtube.com/watch?v=A4dgZ-kPNQ8Waiting for additional spec's

ZAFFARONI MSR 160 P BS/PD MULTI-BLADE PANEL SAW (W/TOP & BOTTOM ARBORS): -- SpecificationsZAFFARONI is the "Top of the Line" in Precision Multi-Rip Saws for Panels. Blade Depth is mechanically adjustable with a tolerance of +/- 0.01 mm (0.0004").The Saw is so precise it can also be used for V-Grooving.The Saw blades project through the table from above & below. A double-row of hold-down wheels are mounted above the saw, with (28) adjustable rollers to prevent contact with the blade.The Top & Bottom shafts & wheels are connected by a quick flange system that can be removed/replaced without dismounting the bearing collars.Motorized adjustment of the depth of the saw blade projection by the touch-screen operating control(4) motorized & self-adjusting (according to material thickness) upper rubber coated rollers with grooves,(4) Idle lower polyethylene coated rollers & (1) Pair of ejector rollers at the output of the machine.Automatic locking and unlocking arbor shaft with HSK collector on the LH side controlled with electro-pneumatic device for the automatic cleaning of the coupling Safety device that features a presence and positioning sensor of the shaft; closed circuit air cooling device for the shaft bearingsSaw Blade work table with interchangeable MDF inserts.Technical Characteristics: -- Working Width is 1,600 mm (63"). -- Max. panel pass through is 1,780 mm (70"), min. length is (450 mm) 17.7". -- Motorized thickness adjustment from 0 - 70 mm (2.7"). -- Adjustable projection of the saw blades from the working from 0 - 62 mm (0" - 2.4") with circular saw blades or hogger trimmer up to 280 mm dia. (11"). -- Working table height is variable, from 970 - 1270 mm (38" - 50"). -- Material Feed Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power is 45 kW (60 HP) with toothed Belt Drive arbor. -- Saw Blade arbor 80 mm dia. x 1,610 mm (3.2" x 63.4"), with double-tangs and automatic anti-rotation locking clutch. -- Blade Arbor Speed of 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC Logic touch screen control with digital communications through profibus cable.Spacer Sets: Machine requires Spacer Sets and Saw Blades (not included); pricing is available on request.Examples:width from......1 - 10 mm ...$ 25.45width from.....11 - 25 mm ...$ 30.15width from.....26 - 50 mm ...$ 35.60width from.....51 - 75 mm ...$ 40.15width from.....76 - 100 mm ...$ 45.20width from...101 - 125 mm ...$ 49.75width from...126 - 150 mm ...$ 54.90Example of productivity:Approx. 240 panels/hour running the machine at 49 FPM (15MPM) – considering to load 4 panels/minute) & a change-over time of approx. 10 minutes.

ZAFFARONI MLS 130 P PD MULTI-BLADE PANEL SAW: -- SpecificationsZaffaroni is the Top of the Line in Precision Multi Rip saws for Panels. Blade Depth is mechanically adjustable with a tolerance of =- 0.01 mm (0.0004"). The saw is so precise it can also be used for "V" grooving.The Saw blades project through the table from below. A double row of hold down wheels are mounted above the saw, with 24 adjustable rollers to prevent contact with the blade.Technical Characteristics: -- Working Width 1300 mm (51-1/8") -- Min. Panel Length 300 mm (11-7/8"). -- Motorized thickness adjustment from 0 - 70 mm (2-3/4"). -- Adjustable projection of the saw blades from the working from 42 - 62 mm (1- 5/8" - 2-7/16") with circular saw blades or hogger trimmer up to 280 mm diam. (11"). -- Working Table Height 1120 mm (44"). -- Transport Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power 37 KW (50 HP) with Belt Drive. -- Saw Blade Spindle 80 mm x 1310 mm (3-1/8: x 51-1/2"), with double tangs and automatic anti-rotation locking clutch. -- Spindle Speed 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC logic control with digtital communications through bus cable.Spacer Sets: Machines require Spacer Sets and Saw Blades (not included) and pricing is available on request.