EXTREMA DCF-05 Bag Filter. -- Features a 16" inlet; unit has (5) sections, (5) 1 micron filter bags with (5) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!

EXTREMA DCY-750.3 TYPHOON Cyclone Dust CollectorCyclone & fabric filtration dust collection system. -- Powerful two-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock (included), allowing you to choose the disposal system, before passing finer particals through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM with 7.5 HP Induction motor with 12" inlet. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Standard support frame to allow use with a waste hopper under the cyclone.

EXTREMA DCY-1000 TYPHOON Cyclone Dust Collector. Cyclone & fabric filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock with 10 CFM capacity, allowing you to choose the disposal system, before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags; air volume output rated @ 6,400 CFM. -- Equipped with: 10 HP Induction motor, 16" steel blower fan impeller and is dynamically balanced and 12" inlet. -- Includes: Collection bag snap-in ring for easy addition or removal of plastic bag; filter bags filter dust particles down to (1) Micron in size; low noise operation. -- Supplied with: Heavy Duty support frame to allow usage with a waste hopper under the Cyclone.

EXTREMA DC-203.1 TYPHOON Cyclone & Fabric Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter. -- (1) Fabric filter bag placed above plastic collection bag. -- 1,785 CFM Output. -- 3 HP Induction motor. -- 13" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bag filters dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Sturdy steel tripod cyclone mounting stand and drum dollies (drum not included.)

EXTREMA DB-50.3 TYPHOON BLOWER. Capacity 5 HP, 3,200 CFM. -- Solid heavy gauge steel construction. -- Heavy duty dynamically balanced steel impeller, 10" inlet, 13" impeller, 12" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. - Complete with magnetic starter. -- Note: 460 Volt available

EXTREMA DC-232.3460 TYPHOON Fabric Filtration Dust Collection System. -- Powerful, portable, and affordable dust collector with roll around casters mounted to a steel platform base. -- (2) Oversized Fabric filter top bags are placed above fabric collection bags. -- 2,950 CFM Output with single-stage blower. -- 3 HP Induction motor. -- Filter bags filter dust particles down to (2) Micron in size. -- Quad 4" dust port adapter.

EXTREMA DC-240.1 TYPHOON Fabric Filtration Dust Collection System. -- Powerful, portable, and affordable dust collector with roll around casters mounted to a steel platform base. -- (2) Oversized Fabric filter top bags, approx. 75 sq. ft.filter area, are placed above plastic collection bags, approx. 18.85 cu. ft. storage capacity. -- 3,950 CFM Output with single-stage blower. -- 5 HP Induction motor. -- Filter bags filter dust particles down to (5) Micron in size. -- Main inlet 10" or dual 4" adapter.

EXTREMA DC-3075.1 TYPHOON Fabric Filtration Modular Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 4,550 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 7.5 HP motor with push button control and motor starter. -- 13.5" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit.

EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".

FARR GOLD GS4 DUST/FUME/MATERIAL COLLECTOR: 3,000 CFM Rated cap., 1,300 sq. ft. filter area from (4) cartridge filters, approx. 2.3:1 air: cloth ratio . -- Equipped with: 5 HP Pull thru motor; dirty air is pulled into the filter area at bottom of filter media section allowing gross dust particles to fall into collector barrels located beneath pyramidal hopper discharging to a sealed drum (not included) -- Fine dust is pulled up thru the cartridge filters; dust filter cartridges are cleaned by automatic pulse jet with minimum compressed air consumption; cleaned air continues thru blower and is returned to the building air supply thru a silencer.. -- Includes: Cyclone with slide gate discharging into a sealed barrel (not included), electrical control panel, support stand with clearance under hopper, discharge for a waste bin,. access door, some pipe as pictured. -- Note this unit is still in use. Please inquire for availability date.

FCM - RS-30: 30 HP Vertical Feed Hammer HogSpecifications -- Intake: 14" x 18". -- Drive motor: 30 HP. -- Extraction: 8" Diameter. -- Screen with: 3/4" Holes. -- Magnetic starter.

FRIULAIR ACT125UP MB 125 SCFM Non-Cycling Refrigerated Compressed Air DryerSpecifications: -- Max. inlet air pressure 203 PSIG. -- Max. inlet air temperature 158° F (70° C). -- Ambient temperature 34° - 122° F (1° - 50° C). -- Nominal pressure dew point 38° F (3° C). -- Refrigerant type R-407C.Equipped with: -- 890 W (1.19 HP) Refrigeration compressor motor. -- 95 W (0.13 HP) Fan motor. -- "ALU-DRY" heat exchanger. -- Graphic display. -- "DMC 34" LED Controller, with Condenser fan control, Scheduled maintenance reminder, Condensate drain valve timer, & Dryer malfunction detector.

Fukami RT-300 Straight Line Rip SawSpecifications : -- 12" Blade cap., -- 10 HP main motor, 5,700 RPM arbor speed, -- 2-3/8" depth of cut, 8-1/4" min. stock length, 15" throat depth; -- 7-1/2" wide rubber pad feed chain, -- Variable feed speed 50 - 100 FPM, -- 31" X 55" table size.Equipped with and Features --: Anti-Kick back fingers, -- Push button and chain lubricator.NOTE from the seller : Fukami Straight Line Ripsaw. In good condition. Good non marring track is like new. Used in small shop. Nice compact machine with dust collection hood. 12"; carbide blade. 10 hp 3 phase belt drive. Easily changed to single phase. Owner can load

GENERAL - 350 10", ...Tilting Arbor Table Saw with: 5 HP Motor & Rip FenceSpecifications: -- Table size: 20" LR x 28" FB x 34-1/2" H. -- Arbor dia. 5/8"; tilt 0° - 45° to right; blade speed: 4,000 RPM. -- Max. depth of cut: 3-1/8" at 90°; 2-1/8" at 45°; max. width of dado cut 13/16". -- Max. rip cap.: 52" Right.Equipped with: -- 8" Left & right table extensions. -- 5 HP Motor.Complete with: -- DELTA "Unifence Saw Guide"; 43" L x 3-1/2" H Rip Fence System. -- Blade Guard. -- Miter Gage.

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25 HP Motor -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" -- Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand-alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved, and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GO FAST 2-Head 6 X 8 Master Resaw w/6" x 8" Cut Cap. Specifications: -- 15 HP TEFC motors, max. blade height 5-3/4" from conveyor belt x 8" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 6" wide feed belt conveyor and return; and top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Operator return table; 15'-1" x 1" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- Secondary hold-down wheel; outfeed speed-up roller; ripsaw fence attachments; & more.

GO FAST 6 X 12 Master Resaw w/6" x 12" Cut Cap. Specifications: -- 20 HP TEFC motor, max. blade height 5-3/4" from conveyor belt x 12" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 10" wide feed belt conveyor; top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Operator return table; 15'-1" x 1" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- 22 HP Gas Engine; 10 HP 1-Phase; 575 Volt 3-Phase; secondary hold-down wheel; outfeed speed-up roller; ripsaw fence attachments; & more.

GO FAST 6 X 6 Master Resaw w/Powered Return Specifications: -- 15 HP TEFC motor, max. blade height 5-3/4" from conveyor belt; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 120 FPM, 6" wide feed belt conveyor; top mounted powered holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Self-adjusting powered belt return conveyor; 15'-1" x 1"-1/1/4" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- 20 HP Electric Motor; 22 HP Gas Engine; 10 HP 1-Phase; 575 Volt 3-Phase.

GPI - M60MD: Low Profile Vertical Baler Specifications -- Bale size: 30";x 60"; ≤ 30";. -- Bale weight (OCC): ≤ 800 Lbs. -- Feed opening: 24" x 60". -- Ram force: 57,805 Lbs. -- Motor size: 5 HP. -- Cylinder size: Twin 4" Bore; 32" stroke. -- Cycle time: 33 Seconds. -- Bale tying: Manual wire; twine; strapping. -- Loading door opening: 24" x 60". -- Unloading door height: 39". -- Operating height: 95-3/4". -- Overall depth: 37". -- Overall width: 78". -- Depth with door open: 73". Features -- Safety interlocks and shielding of all shear & pinch points. -- Loads, ties, & ejects bales from the front of the machine. -- Hydraulic eject system. -- Fully automatic compression cycle. -- Low profile operates under a standard 8 foot ceiling. -- Energy efficient 2-stage pump. -- Reliable and durable hydraulics. -- “I"; Beams & heavy channel used in structural construction. -- Ships upright for easy installation. -- Comes with: Casters for simple and easy maneuverability. -- Meets or exceeds OSHA or ANSI Z245.5 safety standards. -- Made in ihe U.S.A.