HOMAG SAWTEQ B-400 PROFILINE 32/32 FRONT LOAD AUTOMATIC PANEL SAW + VrSS POST FORMING: -- Specifications:Working Capacity: 122'' (3,100 mm) Rip cutting capacity; 122'' (3,100 mm) Pull back capacity. Main saw blade projection 4.3'' (110 mm) 37,5 HP (28 kW) Main saw blade & 3 HP (2.2 kW) "Post Forming" (VrSS Jump) scoring blade; Scoring saw adjustment via "CADmatic" control. -- Saw CarriageForward speed 0 - 492 FPM (0 - 150 MPM) Saw carriage reverse speed 0 - 492 FPM (0 - 150 MPM). -- Pusher Fence:Electronically controlled overhead program fence with (9) 2-finger gripper clamps; clamps open up to 110 mm (4.3").Rack & Pinion drive on both sides, forward speed up to 296 FPM (90 MPM), return speed of 296 FPM (90 MPM). -- Operator & Machine Control:HOMAG "powerTouch2" PC Front-End with "CADmatic 5.0" Operating System "designed for industrial environments"; virtually unlimited cutting dimensions memory.21" Full HD widescreen "Touch-Screen" monitor with multi-touch display, online operation from an office PC is possible. All mounted into dust sealed, air-conditioned control cabinet."Real-Time" Cutting sequences with a new 3D assistance graphic supports the operator and is intuitive to operate, which shortens the training period and reduces errors to a minimum. This results in efficient processes and steady output.Simple handling via tapping and swiping (touch functions) with Quick change between the individual sectionsCADmatic 5.0 is Tapio compatible & open for communication with other machines and software solutions.The SAWTEQ B-400 "IntelliDivide" optimizing software is Tapio-ready from installed software or directly from the tapio cloud, allowing "IntelliDivide" to recognize the machine configuration of your saw and consider it for every optimization run in the cloud, completely automatically & you have the choice -- Complete with:On-Board Optimizer; Automatic "CENTRIC" side aligner with front & rear forks holding ripped strips squarely against the right-angle fence.Max. Side aligner stroke 122'' (3,100mm): Rear support rails with non-marking roller modules.(3) Front air flotation tables 74" x 26 (1,879 mm x 660 mm). -- Options Include:(1) American M-1202-30, 6,000 Lbs. scissor-lift, as pictured. -- Actual model is HOMAG SAWTEQ B-400 PROFILINE 32/32 US Addition.

LAZZARI JUNO 3200 Sliding Table Saw with 126" Carriage TravelSpecifications: -- 13" Wide anodized aluminum sliding table w/lateral handle; 45° tilting arbor, 13-3/4" blade cap., 4-3/4" max. depth of cut, 49" rip cut cap. -- 9 HP Main motor, (3) cutting speeds 2,800 - 4,000 & 5,600 RPM, 1 HP - 8,500 RPM scoring unit with external fine adjustment, manual height & tilt adjustment, all point slide lock, on/off switches at end of sliding table. -- Complete with: -- Steel overarm protection guard, outfeed table extension, rip fence w/micro-adjust, crosscut fence with (3) flip stops. -- Includes: -- Three-phase transformer.

120" Carriage travel, 13" wide anodized aluminum sliding table w/lateral handle, 45ø tilting arbor, 13-3/4" blade cap., 4-3/4" max. depth of cut, 49" rip cut cap. -- 9 HP Main motor, (3) cutting speeds 2,800 - 4,000 & 5,600 RPM, 1 HP - 8,500 RPM scoring unit with external fine adjustment, manual height & tilt adjustment, all point slide lock, on/off switches at end of sliding table. -- Complete with: Steel overarm protection guard, outfeed table extension, rip fence w/micro-adjust, crosscut fence with (2) large stops and "goniometer" miter system; mechanical holddown clamp for multiple panels. --From seller: "This Saw though several years old has been meticulously maintained with weekly cleaning and lubrication (which are the only maintenance needed besides regular belt checks and blade changes). It operates comparably to when it was purchased new. Scoring blade adjustments are easily performed at the front facing adjustment knobs."

MAYER - PS 80P: Front Load, Automatic Panel Saw -- Specifications125.9" (3,200 mm) Cutting length & 122" (3,100 mm) pull back; 3.14" (80 mm) max. saw blade projection.12 HP (9 kW) Main saw motor; 320 mm main saw blade (3,800 RPM); 30 mm bore dia.; 1.5 HP (1.1 kW) score blade; 150 mm (8,680 RPM); 30 mm bore.Electronically controlled saw blade height adjustment; electronically controlled scoring blade horizontal (side-to-side) adjustment; "QUICK CHANGE" main & scoring blade system. -- Saw CarriageInfinitely variable forward cutting speed from: 5 - 262 FPM (1.5 - 80 MPM); constant return speed of: 262 FPM (80 MPM).Automatic cutting length adjustment; rack & pinion drive (not chain); AC Servo motor drives on the saw carriage with rack & pinion on hardened & ground guideways. -- Pusher FenceElectronically controlled overhead program fence; forward speed: 0 - 82 FPM (0 - 25 MPM); return speed:196 FPM (60 MPM); fence retracts: 122" (3,100 mm) Behind cutting line; AC Servo motor drives on the pusher fence with: Rack & Pinion on hardened & ground guideways.(6) Material gripper clamps open up to: 80 mm (3.1"); (3) Are closely spaced in crosscut area; the other (3) are at equal distance in rip cut area. -- Operator InterfaceMAYER "PC 5400" + Windows Operating System with: "REAL TIME" graphic display; 14" Color monitor mounted in a pivoting console.3-COM Network interface: 10/100 MBs with RF45 (TP) connection; (2) serial, (1) parallel interfaces, and SVGA graphics adapter; data input by keyboard or downloading from office PC is possible.PC 5400 Control System features: Automatic cutting length (material is scanned by sensor underneath the packet on the saw bed); electronically controlled automatic cutting height adjustment (also can be used for grooving by entering depth and width of groove at control).Automatic trim calculation: Constant display of remaining material in both axis during programming (eliminates need for operator calculations during programming). -- Complete with:Left angle crosscut fence: 78.7" (1,999 mm) long;, automatic crosscut aligner from: 3/4" - 47.2" (19 - 1,199 mm) with automatic presetting.Rear slotted pressure beam to minimize offcut; (3) front mounted air flotation tables: 79" x 24" (2,000 x 600 mm); segmented transparent plastic safety guards on front of pressure beam; wire mesh screen enclosure around rear machine table. -- Actual model - MAYER PS/80P/3200

ORIGINAL 3691-03 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20" Max. blade dia.; 7" max. cutting depth @ 90°; 3-1/2" @ 45°; 62" long x 1", 4" & 6" thick max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection. -- Single-phase option available for;...$ 250.

ORIGINAL 3691-01-7 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20-1/2" Max. blade dia.; 8" max. cutting depth @ 90°; 4" @ 45°; 60" long x 1" max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection.

ORIGINAL 3691-03 Overhead Rail Panel Saw w/Infeed and Outfeed TablesSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20" Max. blade dia.; 7" max. cutting depth @ 90°; 3-1/2" @ 45°; 62" long x 1", 4" & 6" thick max. crosscut cap. -- Complete with: -- Heavy gauge steel base & legs for solid support; upper & lower blade guards; magnetic starter and overload protection. -- Includes: -- Infeed & outfeed tables.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5x Entry-level Vertical panel saw for cutting various materials, straight & square to 1/32". Specifications: 3.25 HP Industrial Duty saw motor; 8" saw blade cap. with 1-3/4" max. material thickness; 64" crosscut (vertical position) with spring-loaded counterbalance system; unlimited rip-cut length cap. Features: Saw head rotates 90° to switch between rip and crosscut modes; adjustable scales on a 10' welded steel frame. Complete with: Zinc plated 1-3/4" guide tubes with "Nylatron" 4-roller bearing system; +/- 1/32" squaring or straight cutting tolerance. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SAFETY SPEED MFG 7400 Vertical Panel Saw: Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 2 HP single-phase Induction Saw Motor. -- 8" Blade cap. with 2-1/8" max. material thickness. -- 64" Crosscut (vertical position) with spring loaded counterbalance system. -- 120" Frame length with unlimited rip cap. -- 90° Saw head rotation to switch between cross- and rip cut modes. -- Triangulated welded steel frame with base mounted aluminum rollers. -- Midway fence for small part cutting. -- Adjustable scales on a 10' welded steel frame. -- Heavy extruded beams utilizing dual-V bearings. -- 0.005" Squaring or straight cutting tolerance. -- Optional material scoring attachment. 120" L x 46" W x 96" H (Crated Dimensions - 125" L x 51" W x 101" H). Machine pictured with Optional Wheels and Frame.Also available with 3 HP single-phase motor.

Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP Industrial-duty saw motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 64" Crosscut (vertical position) with spring loaded counterbalance system. -- Unlimited rip capacity. -- 90° Saw head rotation to switch between cross- and rip cut modes. -- Triangulated welded steel frame with base mounted aluminum rollers. -- Option: Midway fence for small part cutting. -- Option: Adjustable scales on a 10' welded steel frame. -- Zinc plated 1-3/4" guide tubes with "Nylatron" 8-roller bearing system. -- ± 1/64" Squaring or straight cutting tolerance. -- 120" L x 36" W x 90" H (Crated Dimensions - 125" L x 41" W x 95" H). -- Machine pictured with Optional Wheels and Stand.

Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP Worm drive industrial duty saw motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 74" Crosscut (vertical position) with spring loaded counterbalance system. -- Unlimited rip capacity. -- 90° Saw head rotation to switch between cross- and rip cut modes. -- Triangulated welded steel frame with base mounted aluminum rollers. -- Midway fence for small part cutting. -- Adjustable scales on a 10' welded steel frame. -- Zinc plated 1-3/4" guide tubes with "Nylatron" 8-roller bearing system. -- ± 1/64" Squaring or straight cutting tolerance. -- 120" L x 36" W x 98-1/2" H (Crated Dimensions - 125" L x 41" W x 103-1/2" H). -- Machine pictured with Optional Wheels and Stand.

Panel Saw and Router Combination on (1) vertical 10' steel welded frame. -- Can be changed from saw to router in less than a minute and has accuracy of 1/64" straight and square. -- 3 HP, 15 amp Industrial duty saw motor. -- 3-1/4 HP, 11 amp Industrial duty router motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 62" Crosscut (vertical position) with spring-loaded counterbalance system. -- Equipped with a MID-WAY FENCE system with stop as standard equipment which makes processing small panels more efficient. -- The patented self-adjusting router carriage provides for a consistent depth of cut when routing. -- Unlimited rip capacity. -- 90° Saw head rotation to switch between rip and crosscut modes. -- Adjustable vertical and horizontal rulers. -- Chrome plated 1-3/4" guide tubes with 8 "Nylatron" roller bearing system. -- Adjustable floating router head. -- 4 Material clamps. -- 2 Blind dado stops. -- Optional equipment available: "Gold", "Silver" and "Bronze" Packages are customized to maximize the benefits for building component shops and save when purchased together. -- "Bronze Package" includes: 5' QUICK STOP Gauge, saw blade 840ATB1 for general purpose wood, fixed stand, wheels. --"Silver Package" includes: 8' QUICK STOP Gauge, Dust Collection Kit (Vacuum additional) saw blade 860ATB for fine wood, fixed stand, wheels. -- "Gold Package" includes: MID-WAY FENCE, 8' QUICK STOP Gauge, saw blade 860NRATB for melamine, veneer and laminates, fixed stand, wheels. Other Options available: extensions, Stop bar gauge, MID-WAY FENCE flip stop, dust hood and hose kit, dust vacuum system (1 HP or 2-1/4 HP), hold down bar, specialty saw blades and router bits. -- Contact Product Manager for prices on optional equipment. -- 120" L x 36" W x 90" H (Crated Dimensions - 125" L x 41" W x 95" H).

The 7000 vertical panel saw is a high capacity production machine. This heavy-duty saw offers incredible durability and accuracy at a very affordable price. -- Sporting a 3 HP, 3-Ph motor - (Model 7000M - 2 HP 1-Phase deduct $ 205) this machine will rise to the occasion during the toughest of applications. -- The saw carriage rides on two aluminum anodized extruded beams with integrated linear v-guides allowing the machine to deliver an accuracy of .015". -- The rugged steel frame will handle years of abuse in the most challenging working environments. -- Shipping anywhere in continental U.S.;...$ 649.

SCHELLING FXH 430/410 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:169" (4,300 mm) Cutting length & 167" (4,250 mm) pull back; 3.9" (99 mm) max. saw blade projection, 23 HP (17 kW) main & 3.5 HP ((2.6 kW) scoring motor. -- Saw Carriage: Electronically controlled saw carriage with rack & pinion drive; variable travel speed 1 - 394 FPM (1 - 120 MPM), constant return of 394 FPM (120 MPM). -- Pusher Fence: Electronically controlled overhead pusher fence, rack & pinion driven on both sides; (9) Gripper clamps that open up to 3.5" (90 mm). -- Forward speed 0 - 262 FPM (0 - 80 MPM), return speed 262 (80 MPM) FPM; travel via brushless AC Servo Drive -- Operator & Machine Control:PC Front-end with Schelling "MCS" + Windows "NT" operating system.17" Color display with SVGA resolution (displays cutting dimensions & patterns w/moving graphics); virtually unlimited storage capacity, standard keyboard & mouse.Ethernet card; 128 MB Ram, 56K modem. Integrated graphical self-diagnostic, remote diagnostics by the factory is possible via dedicated phone line; data input by keyboard or possible direct downloading from office PC.SCHELLING "MCS" software displays simulation of patterns before actual cutting; graphical representations of cut-to-size parts in production shows the operator what to do in "real time". -- Complete with:2,300 mm Long crosscut fence (front-to-back), (2) automatic side/crosscut aligners for up to 87" (2,210 mm) crosscuts, (1) in front & (1) behind pressure beam cut line.(3) Front mounted air floatation tables, each table 24" x 83" (609 x 2,108 mm), rear of machine fully enclosed for safety with man-height safety fencing. -- Actual Model is SCHELLING FXH 430/410

SCHELLING FM-430/410 CNC Front Load Panel SawSpecifications & Features: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main & 3.4 HP (2.5 kW) 5,600 RPM scoring motor. -- Equipped with: Variable saw carriage travel speed from 0 - 278.8 FPM (85 MPM), constant return of 278 FPM (85 MPM). -- Electronically controlled overhead program fence with rack & pinion driven on both sides; forward speed from 0 - 278 FPM (85 MPM), return speed of 278.8 FPM (85 MPM); equipped with (8) gripper clamps (open up to 5" (130 mm). -- Features: SCHELLING "COMPOSER" IBM-AT Compatible Computer Control; aftermarket color monitor (displays cutting dimensions and patterns w/moving graphics) , self-diagnostic, data input by keyboard; onboard optimization program. -- Complete with: 2-3/4" to 87" (2,200 mm) Long side/cross-cut aligning zone, (1) aligner in front & (1) behind the cut line. -- (3) Front mounted air float tables for moving panel from rip section to the cross-cut section, (2) movable and (1) fixed; each with their own blower. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. T

SCMI SIGMA PRIMA 50 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: Working cap:149.6" (3,800 mm) Max. rip cut cap. 125.9" (3,200 mm) pusher stroke; 1.96" (50 mm) max. saw blade projection; 12 HP (9 kW) main saw motor (3,900 RPM); 2 HP (1.5 kW) scoring saw motor (6,300 RPM).Main blade diameter: 11.8" (300 mm), Main blade arbor diameter: 80 mm; Scoring blade diameter: 6.37" (160 mm), Scoring blade arbor diameter: 55 mmAutomatic exclusion of scoring unit when motor is in off position. -- Saw carriageFeed speed 0 - 327 FPM (0 - 100 MPM), return speed 327 FPM (100 MPM),Automatic saw carriage lubrication, balanced on hardened cylindrical guides; external score saw adjustment, THK guides for vertical saw movement. -- Pusher Fence:Feed Speed 0 -230 FPM (0 - 70 MPM) forward speed, 230 FPM (70 MPM) reverse speed;Programmable rear fence with (7) material gripper clamps, rack & pinion movement,Grippers fit into a slotted pressure beam for positive material control during the final cut. -- Operator & Machine Control:PC front-end with: SCM Real time "WinCut" + Windows "7 Professional" operating system; Pentium 300 MHz, 6.4 GB hard drive, 64 MB RAM,17" color super VGA flat screen monitor, on-screen diagnostics & production reports; (2) serial ports & (1) parallel port, spacing available for networking cards. "Cutty" optimization software is included which allows: 30 lines per program, 300 max number of pieces per line, and 3 cutting levels. -- Complete with:Side alignment device: Min. part width 2.36"; Max. part width 48"; Rear support rails with rollers;(1) Front fixed air table 98" x 24" (2,500 x 609 mm), (2) Adjustable air tables 59" x 24" (1,500 x 609 mm).Plastic safety guards; emergency stop bar; enclosed cutting area; triple dust collector outlet. -- Actual model is SCMI SIGMA PRIMA 50.

SCM TECNOMAX SC/4 WS 8-1/2' Sliding Table SawSpecifications: -- Max. depth of cut with 315 mm (12.40") Dia. blade: 100 mm (3.94") at 90°, 70 mm (2.76") at 45°. -- Main saw: 3.6 kW (4.82 HP) Motor, Blade dia. 315 mm (12.40"), Arbor tilt 0° - 45°, Blade speed 4,000 RPM. -- Scoring saw: Blade dia. 100 mm (3.94").Equipped with: -- 11-1/2"; x 102"; x 35-1/2"; H Aluminum sliding table, 840 mm (33.07") LR Fixed table. -- Manual raise, lower & tilt. -- Mechanical digital tilt indicator.Complete with: -- 39-1/4"; L x 3-1/2"; H Rip fence, with 51" Cutting width cap. & Cam-locking. -- 650 x 1,100 mm (29.59" x 43.32") Squaring frame, with Crosscut fence with 1,800 mm (70.87") Cutting cap., (2) Flip stops & Sliding outrigger support.Actual model is SC/4 WS-N.

SCM MINIMAX - FORMULA S1, ...Sliding Table SawSpecifications: -- 120" Cap. with: Scoring; 9 HP main motor & belt driven scoring blade; -- Manual tilting of the arbor 0° - 45°; Manual raise-and-lower of the main blade; -- 50" crosscut capacity with a movable fence.Features: -- "Easy-Set" scoring adjustment; heavy cast iron trunnion; 12" main saw blade dia. with 1" Arbor, 110 mm scoring blade dia.; -- Max. cutting height 3-1/2" at 90° & 2-3/4" at 45°; 1-speed arbor; 8,000 RPM on scoring blade. -- Complete with: 4" Main dust extraction outlet, miter fence & crosscut fence assembly with (2) flip stops.

SCM FORMULA S35 Sliding Table SawSpecifications: -- 10' Cap. with scoring, 9 HP motor for main and scoring blade, tilting arbor 0° - 45°. -- 126" Table stroke, 51" rip cut capacity with movable fence. -- 350 mm (13-3/4") Main saw blade dia., 120 mm (4-3/4") scoring blade dia., max. cutting height is approx. 120 mm at 90°; 4,000 RPM. Complete with: -- Overhead guard w/4" dust extraction outlet. -- Crosscut fence assembly with (2) flip stops.

SCMI MINI MAX - Formula S 2: Sliding Table SawSpecifications & Features -- 128" Cutting cap. w/standard scoring saw and carriage; 5 HP motor; stop on fence for cuts extendable to 128"; 50" cutting width w/ rip fence.Equipped with: -- 14" Main blade; 4-1/2" scoring blade; 4-1/2" max. blade cutting height at 90°; 3-1/2" max. blade cutting height at 45°. -- 4,000 RPM Main blade speed; 8,500 RPM scoring blade; 90° - 45° blade tilting.