KAESER ASD 40 T 40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24) Specifications: Rated cap. 191 CFM. Max. pressure 125 PSIG. Equipped with: 40 HP - 3,570 RPM TEFC Direct drive motor, IE3 (Premium Efficiency). "SIGMA PROFILE" Air end. 1:1 Motor-air end coupling. Wye-Delta reduced voltage magnetic starter. Electronic Thermo-Management (ETM) system. 2-Stage 4 micron air intake filter, with Cyclone pre-separation & replaceable element. Safety pressure relief valve. Anti-vibration mounts. Sound enclosure. KAESER "SIGMA CONTROL 2" PC-Based controller, with LCD Display & Touchpad. Complete with: Integrated Refrigerated Dryer. Compressor Operator Manual & Controller User Manual. Dimensions for this Specific Machine: 70" x 36" x 61" H. Weight for this Specific Machine: 750 kG (1,650 Lbs). CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

KVAL COMMANDER Pre-Hung Door Machine/Door Line. Automated Cylindrical Lock and Hinge Machine for Pre-Hanging Interior & Exterior Doors; for doors Up to 2-1/4" thick x 4' x 9'; Routes, makes a 3° bevel on one side of the door edge. -- Traveling hinge router stops at each collar on the index shaft and tilts into approx. 3-1/2" to 5-1/2" hinge pocket on square or bevel doors. -- Selector switch allows sequencing for (2 - 3 or 4) hinges, 1/4" or 5/8" corner radius, and door/jamb or door only machining. Turret stops determine hinge size. -- Hinge index bar with embedded scale can be interchanged with other pre-set index shafts for rapid hinge center adjustments, or collars can be adjusted along the scale. -- Heavy Duty lock section features 5 HP face bore, 3 HP latch bore and 1.5 HP plate router; adjustable for 2-1/4" - 5" back-sets with self-centering clamp system for faceplate & latch hole; plate router adjusts for square or beveled face plates up to 12" long. -- Jamb clamps front load for easy handling self-adjust; there is no jamb width limitation. -- This machine can produce 250 or more doors per shift, including lock prep and hinge mounting to the door and hinge jamb.

KAY INDUSTRIES Phasemaster MA-1 5 HP Rotary Phase Converter.Features: 5 HP Largest single motor starting capacity; will run 10 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-1 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-1-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 522Optional LSV option for sensitive electronics add...$ 550

KAY INDUSTRIES Phasemaster MA-2, 10 HP Rotary Phase Converter.Features: 10 HP Largest single motor starting capacity; will run 20 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-2 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-2-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 500Optional LSV option for sensitive electronics add...$ 900

KAY INDUSTRIES Phasemaster MA-6, 30 HP Rotary Phase Converter.Features: 30 HP Largest single motor starting capacity; will run 60 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-6 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-6-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 7006Optional LSV option for sensitive electronics add...$ 1,200

KAY INDUSTRIES Phasemaster MA-8, 50 HP Rotary Phase Converter.Features: -- 50 HP Largest single motor starting capacity; will run 100 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-8 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: -- 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-8-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 1,500Optional LSV option for sensitive electronics add...$ 3,600

KAY INDUSTRIES Phasemaster MA-1B, 7.5 HP Rotary Phase Converter.Features: 7.5 HP Largest single motor starting capacity; will run 15 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-1B provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-1B-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 500Optional LSV option for sensitive electronics add...$ 900

KEESTRACK - Frontier: Portable ScreenerTechnical Specifications -- Capacity: Up to 600 ton. -- Weight: 30 Ton. -- Screen box (L x W): 4,500 x 1,800 mm. -- Feed hopper in HB450: 8 cbm. -- Hydraulic folding hopper for transport.• Heavy-Duty Plate Apron Feeder: 3,560 x 1,300 mm. -- Loading height. Open back wall: 2,420 mm; half open back wall: 2,850 mm; closed back wall: 3,260 mm. -- Side loading length: 4,400 mm Screen box L x 4,500 W x 1,800 mm Hydraulic liftable screen box.• Screen box can be set in several inclination: Standard walkway beside screen box; Standard Long Life. -- Grease: Interval every (250) Hrs. -- The 1st (2,500) Hrs of its life was used to screen mulch. The rest was used to screen concrete. Needs a starter, but we just wired a direct push button to it. Great shape: Has some surface rust but just cosmetic.New main belt & fines belt in the last (100) Hrs.

KENTWOOD M 609X Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 9-1/16"" x 6". Head sequence & Spindles: -- Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 20 HP and bottom 15 HP motor. -- Spindle dia.1 13/16" with cutterhead speed of 7,200 RPM. -- All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chipbreakers.Electric brakes on spindles 2 through 5, Cutting circle of vertical spindles: 125 mm to 200 mm (4,7" X 7.8") Cutting circle of horizontal spindles: 125 mm to 200 mm (4,7" X 7.8"). Feed works: -- Cardan feed-works drive system with pneumatic pressure rollers, Inverter driven 5 HP feed system with feed speeds of 20 - 98 FPM. Infeed. -- Complete with: Full width driven bottom in-feed roller before first head, Serrated steel feed rollers before top horizontal head.Rubber coated feed rollers after top horizontal head, (2) Rollers above and (1) in the table prior to first bottom spindle; (2) additional powered rollers in the table. -- In-feed table 2M (72"), chromed tables and fences. Includes: -- Central lubrication, manual table lubrication pump. -- Side pressure roller mounted to infeed table, Short stock attachment at right spindle for short part, -- Sound enclosure and Interior cabin light. Note: Floor space: 77" W x 166" L x 68" T, Machine weight: 10,800 lbs.

KENTWOOD - R340SM3: Gang Rip Saw w/(2) Movable BladesSpecifications -- Saw blade motor: 50 HP. -- Saw arbor diameter: - 55 mm/2. -- 165" Saw arbor height adjustment: 1/4 HP Motor. -- Saw arbor length: 340 mm. -- Feed Motor: 3 HP. -- Variable speed. -- Feed chain width. -- 15" Infeed pressure rolls.Equipped with & Features -- Push button controls for Saw'; wired for 460 V - 3 PH. -- Infeed anti-kickback fingers. -- Outfeed pressure rolls. -- Sound/safety enclosure.Infeed System -- Advantage Rip I Infeed. -- Deck Size: 140" x 85". -- Photoeyes: Every 12". -- Measure for: Board shape, width, and nominal length. -- (2)Pin-Stops standalone. -- User control Pedestal with BECKOFF. -- Touchscreen year: 2015.

KIKUKAWA - RP-12, ...Straight Line Rip SawSpecifications: --10 HP Arbor motor. -- 12" Blade cap. -- 18" Throat, 2-3/8" max. stock thickness. -- Variable speed from 75 - 150 FPM; 2 HP feed motor. -- Saw blade mounted overhead. -- Table size: 39" x 57".Equipped with & Features: -- Magnetic controls. -- (2) Sets of antikickback fingers. -- Automatic lubrication mechanism.Special Note: Rip Saw taken from service. Runs good glue line; OK for soft woods and surfaced materials. Does not do a good glue line on rough or semi-rough material. This is a Japan-built Saw, and they are built well with a small footprint .

KING CANADA KC-3105C 1,200 CFM Single-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 20" Dia. x 34-1/2" L, Cloth collector bag size 20" Dia. x 34-1/2" L. -- Inlet dia. 6", Outlet dia. 5".Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 4" Dia. Dust Hose Y-Fitting.

KNIGHT l76119 Scissor LiftSpecifications: -- Pneumatically operated 4,000 Lbs. capacity. -- 75-3/4" x 118-1/3" Top platform. -- Lowered height 8-1/2", raised height 26" for total travel of 17-1/2". -- Full safety skirt with pneumatic control pedestal.

KOCH - SPRINT 200 CLASSIC: Feed-Through Boring & Dowel Inserter -- SpecificationsSPRINT 200 CLASSIC, Double end, automatic BGD machine for straight workpieces with: (2) PTP Bore, Glue & Dowel Units & Automatic Belt Feeding. -- Working DimensionsStock length: 10.8" - 98.4" (275 - 2,500 mm); stock width: 2-3/4" - 27-1/2" (70 - 700 mm); stock thickness: 0.59" - 1.18" (15 - 30 mm).NOTE: Specified dimensions do not allow all possible combinations. -- Horizontal/Vertical Drilling StationsEach side traveling on "precision" linear guides; (1) Horizontal drilling unit with: (1) 1.2 HP (0.9 kW) - 7,200 RPM motor. 1.1" (28 mm) Max. drilling depth; total length of drill bits: 2.76" (70 mm).(1) Vertical drilling unit with: (1) 1.2 HP (0.9 kW) - Variable speed from 7,000 - 16,000 RPM motor. 1.18" (30 mm) Max. drilling depth; total length of drill bits: 2.76" (70 mm). -- Dowel InsertingDowel dia.: 8 mm;, dowel length: 30 mm; dowel projection: 7 - 14 mm.(2) Vibrating hoppers with: (1) Outlet tube for feeding of dowels on each side; Dowel size: 8 mm dia., 30 mm in length, and 7 - 14 mm projection. -- Operating ProcessStationary machine side is on the left side (seen in transport direction) and not adjustable.Machine is equipped with: Stock feed belts; belts move the workpiece to the BGD station and clamp it into position for processing.Workpiece is: Transported out of the machine after processing is complete. The workpiece is transferred to the next machine or taken out manually. -- Complete with Central lubrication for working units: Air pressure intensifier with 2:1 ratio for constant compressed air supply for glue valves. Hopper Infeed Device. Separate drive for outfeed belt.· Tele-diagnostic service compatible. Perimeter Safety Devices. All Docs, Manuals, Tools, Spare Parts associated with this machine . -- Actual Model: KOCH SPRINT 200 CLASSIC

KOCH BD-A BORING MACH. (FEED THRU CNC): -- Specifications: Model BD-A Boring Machine for straight rail-stock work pieces for Horizontal & Vertical Drilling; Infeed and outfeed pass height is 36.2" (920 mm) . The work pieces are transported through the working stations by means of a cam transport system.Stock is worked in clamped position. -- Stock dimensions: Stock length 9.8" - 59" (250 - 1500 mm), Stock width 1.50" - 9.8" (38 - 250 mm), Stock thickness 0.63" - 1.18" (16 - 30 mm) Note: The specified dimensions do not allow all possible combinations. -- Horizontal drilling station:Each side with (1) drilling unit with 2.7 HP (2 kW) - 3,400 RPM, Each horizontal boring heads with (3) Spindle Type D-1277 boring chucks on 16 mm centers;10 mm dia shank & 70 mm max bit lengthEach head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holesLinear path control for stock transport with low profile machine bed and linear guides, fixed stock stops,Adjustable working stations with motorized width adjustment. -- Vertical Drilling head with rotating device:(2) LH & (2) RH Type D -1277, 2.7 HP (2 kW) Adjustable vertical boring heads with dust extraction hoods & variable speed from 3,000 - 6,000 RPM; Each Drilling chuck with (1) Drilling Spindle per chuck. Drilling Chucks with KOCH "QC" (quick change) system & rotating device each head; 10 mm dia drill bit shank & 70 mm max bit lengthEach head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holesLinear path control for stock transport with low profile machine bed and linear guides, fixed stock stops,Mechanical digital read out for manual finite adjustment, (2) air hold down clamps, foot pedal control to start activation. -- Features:The stationary machine side is on the LH side (seen in transport direction) and not adjustable. The RH is adjustable via NC controlled "X" axis.The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min.Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer belts with lateral stock alignment; working pass height (36.2" (920 mm).Stock is worked in clamped position; There are stock outfeed belts at the machine outfeed. The workpiece is transferred to the out-feed hopper & removed manually. -- Operator & Machine Control:Beckoff SPS PLC for running the machine. -- Complete With: Open Station to add Dowel Inserting units at a later time ( Dowel units are not included) Manual Hand Pump Central Lubrication system for working units (1) NC controlled positioning of machine RH side (X), LH side is a fixed "0' point. Hopper Rail Feeding devices with capacity of approx 48 Work Pieces/Min. Separate drive for outfeed belt. Center Stock support. -- O

KOCH SPRINT PTP-2 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:Automatic step-by-step, boring, glue injection, and dowel insertion into panel components, drawer parts, chair pieces, etc. at random spacing.Programmed on a 12" color touchscreen monitor pad & stored in built-in CNC control using Windows XP Operating System with graphics & online diagnostic; serial interface & USB connection.Capacity: -- Panel width cap.: 20 mm (3/4") - 1,200 mm (47-1/4") Max. -- Panel Length:100 - 800 mm (4" - 31-1/2"). -- Material thicknes:14 mm - 60 mm (2.4") max. -- Max. boring depth: 50 mm (1-7/8"); standard for 8 mm dia. and 35 mm long dowels. -- 47" X-Axis divided into (2) work zones, 23-1/2" ea.; (1) part can be processed, while the other is being unloaded or loaded. Equipped with: -- (1) Horizontal boring spindle, 6,000 RPM, powered by 1 HP motor. -- (4) Stock clamping cylinders. -- High pressure patented "KOCH ELC" glue injection unit & dowel inserter head. -- Positioning speed of working units at 197 FPM; boring & insertion capacity up to (60) dowels/Min. Complete with: -- Overhead vibrating hopper for dowel feeding. -- "Airtight" pressurized 1:1 glue tank & "ELC" Electronic Glue Detection System (special patented "KOCH design" precision dosing valve w/digital adjustment). -- (2) Fixed fences (RH & LH side); 4-cycle start push buttons; (2) of them ready for center fence mounting to create (4) working fields for fast processing of narrow parts like stretchers, hangers or drawer parts, Center Fence is not included. -- CNC Control w/monitor & touchscreen pad, operator control cabinet, menu driven screen for function control, and graphic illustration of machine functions. NOTE: New glue valve, bucket, hoses & electronic safety sensor installed 2018. -- Actual Model is KOCH "SPRINT PTP-2".

KOCH SPRINT-PLUS/I CNC BORE, GLUE & DOWEL INSERTERSpecifications: -- For horizontal end drilling, gluing, & dowelling into stock ends (left-hand & right-hand sides); horizontal edge drilling; vertical face drilling from below. -- Table size: 20"; x 51"; x 35-1/2"; H; (2) 23-3/4"; W Working fields. -- X-Axis range (CNC): 1,200 (47") with (1) working field; 600 mm (23-1/2") with (2) working fields. -- Y-Axis adjustment range (manual): 0 - 50 mm (0" - 1.97"). -- Dowel diameter 8 mm (0.31").Equipped with: -- (4) 12"; L Pneumatic clamps. -- Horizontal drilling unit. -- Glue & dowel insertion unit. -- Vertical drilling unit from below, programmable along entire length of worktable (X-Axis). -- Manual table adjustment with: Adjustable support rail for movable & removable support elements for vertical drilling from below at any position required and for narrow parts & rails. -- 26"; Dia. x 7"; D vibratory bowl feeder. -- GRACO "HUSKY 307" 7 GPM 100 PSI air-operated diaphragm pump with Stall-free low pulsation air valve. -- PC Based CNC Control, with 12" display. -- Emergency stop device.Dimensions without Vibratory Bowl Feeder: 125" x 78" x 84" H.

KOCH SPRINT-PTP-2-L CNC BORE, GLUE & DOWEL INSERTER: -- Specifications: Automatic step-by-step, boring, glue injection & dowel insertion at random spacing. -- Working Capacity:Stock length (Y) from 4.25" - 31.4" (110 mm - 800 mm), Stock width (X) from 0.75" - 98.4" (20 mm - 2,500 mm),Stock thickness (Z) from 0.51" - 1.57" (13 mm - 40 mm), max. boring depth 1.1" (28 mm). 98.4" (2,500 mm) X-Axis divided into (2) work zones of 47.2" (1,200 mm) ea zone.One part can be processed, while the other is being unloaded or loaded. -- Positioning Speed: 344.5 FPM (105 MPM), boring & insertion capacity up to (60) dowels/Min -- Machining:(1) Horizontal boring spindle, 7,200 RPM, powered by 1.2 HP (0.9 kW) motor; (1) Glue injection & dowel inserting system, Dowel inserter is set up for 8 mm dia. x 30 - 35 mm long dowels (other dimensions available). -- Operator & Machine Control:12." Color touch screen monitor using Windows XP operating system with graphics & diagnostic. serial interface & USB connection.Menu driven operator interface for function control and graphic illustration of machine functions -- Complete with:Central lubrication system; (1) Vibrating hopper for dowel delivery; (8) Stock clamping cylinders; (1) Removable center stop for up to (2) working zones; "Air tight" pressurized 1:1 glue tank.(was only used with water) (2) Fixed fences (RH & LH side), double sided center fence. -- Actual Model is KOCH SPRINT-PTP-2-L

MASTERWOOD PROJECT 317 CNC MACHINING CENTER (P.T.P): Specifications: -- Working Capacity: "X" Axis 102" (2,600 mm), "Y" Axis 37.5" (950 mm), "Z" Axis stroke 5.9" (150 mm), max material thickness is 2.36" (60 mm). -- Positioning Speed:"X" Axis 164 FPM (50 MPM), "Y" Axis 131 FPM (40 MPM), and "Z" Axis 25 FPM (8 MPM). -- Work area: (6) Adjustable panel supports, ea. with (2) vacuum pods; (4) panel lifting blades for heavy parts, (6) fixed pop-up rear stops, (1) side R/H stop, and (1) L/H stop. Machine bed is divided into (2) independent working zones with mirror-image capability -- Boring Unit:2 HP (1.5 kW) - 4,000 RPM motor, (10) Independent vertical boring spindles with (7) spindles in "X"-axis & (3) spindles in "Y"-axis. (6) Horizontal spindles with (2+2) in "X"-axis & (1+1) in "Y"-axis; (1) 12,000 RPM "X"-axis grooving saw with 125 mm dia. blade. -- Machining:(1) 9 HP (6.7 kW) Vertically mounted electro-spindle router with ISO 30 adaptor & ceramic bearings, variable speed fr 6,000 - 24,000 RPM. (1) 4-position automatic tool changer mounted to the machine head for "on the fly" ATC. -- Operator & Machine Control: PC front end controller, Masterwood "MW 310" CNC + Windows operating system; multi-task software with graphic interactive editing & boring optimization program.Features: -- 14" VGA Color monitor, MHZ processor, 64 MB SDRAM, 6.4 GB hard drive, 56 K modem, 1.44MB floppy & CD ROM drives; Ethernet card, serial port, mouse & RS-232 port for remote programming from an office PC is possible -- Software includes realization of profiles & parametric drawings, graphic basic macros for simple & complex elaboration, graphic visualization of the surfaces to be machined, IN/OUT diagnostic, programming for drilling & routing operations with machine settings and tool editor.Includes: -- Vacuum pumpNote: Description based on Model Type, manufacturer's plate, and information from Seller; please inspect to confirm the required specifications. Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Masterwood Project 450L CNC Machining CenterSpecifications: -- X-Y-Z Axis strokes 5820 -1900 - 350 mm, Axis speed X-Y-Z axis 80 - 80 - 25 m/min, Aluminum Panel Support Blocks - 8, Middle Reference Stops - 8, Front Reference Stops - 9, Side Reference Stops 2 dx - 2 sx, Panel Carrying Knives - 4 -- Distance Between Drills - 32 mm, Engine Power - 1,7 kW, Drill Rotation Speed - 4,000 RPM, 12 kW air-cooled motor with HSK 63 tool holder -- Numerical Control with PC, Max Power - 37.3 kVA, Amps. 53.8, Working Pressure - 7 ÷ 8 bar, Compressed Air Consumption - ~ 100 Nl/min -- Upper Dust Extraction Outlet - Ø 250 mm, Dust extraction outlet for sawdust coming out of the conveyor belt - Ø 120 mm, Dust Extractor Air Output Speed - 25 ÷ 30 m/sec, Dust Extractor Air Consumption - 4.900 m³/hIncludes: -- Vacuum pump, (12) Extra ISO Collets, Aggregate HSDNote: Description based on Model Type, manufacturer's plate, and information from Seller; please inspect to confirm the required specifications. Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.