WILLIAMS - Hammer Mill: Half-round Type ConfigurationFeatures: -- 220 HP Main Drive Motor with Belt Drive; complete with Guard. -- 26"; x 12"; Input Opening. -- Powered Input Pull Rolls -- 4"; Main Shaft with Swing Hammers, approx. 3/8"; thickness -- Ratchet Lift Access Lid. -- Mounted on Steel Support Structure with Access Platform and Ladder -- Pneumatic Bottom Discharge with built-in Viewing Window in Ducting below the Hammermill (no fan included) -- Electrical Cabinet with Motor Starters -- NOTES: This machine was last utilized to break up virgin dried pulp for further processing. Already been removed from service – ready to load.

William & Hussey "W-7S" Moulding Shaper -- Specifications: 17-1/4"x 14" Table size, 2 HP main motor, 2-knife cutter head, 3,450 RPM spindle speed, 7" max. cutting height, 1/4" min. thickness 3/4" deep max cut.. Max moulding cap. 7" wide, max. planning cap. 7" wide. -- Complete with: Dust hood outlet, electrical disconnect, and mounted on fabricated steel stand w/casters, Multi-pass

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Specifications: 25" x 7" Cap., 7.5 HP, belt-driven cutter head set up with grooving knives for making "bead board" panels; 3/16" max. depth of cut, 8-1/2" min. stock length. -- Variable feed speed up to 23 FPM; 25" x 49" planing table w/extensions, 4-post bed supports for accurate opening via hand wheel adjustments. Complete with: Magnetic controls, dust hood with extraction outlet, and fabricated steel base.NOTE: Tooling will not be separated from the machine. This machine can be equipped with accessories available through WOODMASTER to double-up duty as a Gang Rip Saw, Drum Sander and enable the production of short moulding runs.

Woodtech QSG 650-R-RPA 24" Widebelt (2) Heads24" width cap, Drum, Combination HeadHead configuration1st Head: Contact roll2Nd Head: Combination head (Roller and Pad)Specifications -- 24" Widebelt Service Side: Left -- Working Thickness: 3-150mm -- Minimum Working Length: 460mm -- Feed Speed: 0-19m/miMachine Frame -- Built with rectangular profiled steel beams to give a very high rigidity to the frame;Main motors positioned inside the frame in a protected position -- Machine frame is connected by high strength hardware (8.8G), and welded for maximum rigidityEquipped with & Features -- V-belt drive from main motors to sanding heads, -- Disk brakes on each sanding drum for emergency stopFeed System -- Feed table is made of steel with a surface tolerance within 0.05mm; table polished to avoid wear of the internal side of the feed belt -- Table is heat treated for accuracy and durability -- Feed speed variable in continuous from 0-19m/minNote : Extra BeltsWoodtech Model QSG 650-R-RPA 24" Widebelt

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5c WORKRITE 4000 High Frequency Wood Welder Specifications: Instantly sets glue in all types of joints in wood or plastic. Cap.: Penetrates full 2-1/2" of wood. Equipped with: (4) Electronic tubes, Flat standard electrodes. Complete with: Hand Gun

WULFTEC WSML-200-B 5,000 Lb. Cap. Low Profile Semi-Automatic Pallet Stretch Wrapper, with ScaleSpecifications: -- Turntable dia. 65", Turntable height 4-3/4", Turntable speed 16 RPM. -- Max. load size 55" x 55", 78"; Diagonal. -- Wrap height 80";. -- Film roll width 20";, Film roll core dia. 3", Pre-stretch ratio 50 - 300%.Equipped with: -- “NO-THREAD"; Powered pre-stretch carriage, with 1 HP Motor & Dual lifting chains. -- (3) ALLEN-BRADLEY “PowerFlex 4"; AC Variable speed drives. -- ALLEN-BRADLEY PLC Control, with Top & Bottom Wrap selectors 1 - 3, Adjustable up & down carriage speeds, Spiral up & down, Photo eye load height sensor, Reinforced wrap/Manual rotation.Complete with: -- GSE “355"; Digital Scale, with Weight cap. 100 - 5,000 Lbs., Accuracy +/- 0.1% of Full scale, Tare, hold , & Auto-zero functions, LED Display, & Touchpad.

WYSONG & MILES - 284, ...Hollow Chisel MortiserThis Heavy-Duty American made Mortiser is a well functioning machine with a 5 HP motor. -- Works like a smooth running clock; a great machine for doing all types of mortises, and it is bulletproof.Note from the seller: Nice 284 complete with a selection of 1/4, 3/8, and 1/2" chisels, bits, collets, and bushings. Runs smoothly, ready to work. Those who have used them will agree that this is the best hollow chisel mortiser made, and easy on your legs if you have a lot of mortising to do.. 220/440/3/60, now 220.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6l WYSONG & MILES 284 M2 Automatic Vertical Hollow Chisel Mortiser Specifications: Max. chisel dia. 1-1/4", Max. bit dia. 5/8". Throat 6-1/4”. Max. distance from table to chisel 16". Table size 8” x 42”, with Tilt 45° Left & Right. Longitudinal table travel 13", Cross table travel 3-3/4", Vertical table travel 12". Max. chisel stroke 4-1/4". Speeds 15, 30, & 45 SPM. Equipped with: 5 HP - 3,600 RPM Spindle Motor. 1-1/2 HP Feed motor. (2) Stroke stops. Spacing gauge, with (6) Adjustable spring stops. Screw clamp. (2) Hold-downs. Foot pedal for Single stroke or continuous operation. Complete with: Fence.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6m WYSONG & MILES 284 Automatic Vertical Hollow Chisel Mortiser Specifications: Max. chisel dia. 1-1/4", Max. bit dia. 5/8". Throat 6-1/4”. Max. distance from table to chisel 16". Table size 8” x 42”, with Tilt 45° Left & Right. Longitudinal table travel 13", Cross table travel 3-3/4", Vertical table travel 12". Max. chisel stroke 4-1/4". Speeds 15, 30, & 45 SPM. Equipped with: 5 HP - 3,480 RPM Spindle Motor. 1-1/2 HP Feed motor. (2) Stroke stops. Spacing gauge, with (6) Adjustable spring stops. Screw clamp. (2) Hold-downs. Foot pedal for Single stroke or continuous operation. Complete with: Fence.

WYSONG & MILES 604 DOUBLE SIDED OSCILLATING EDGE SANDERDouble Sided Oscilating Edge Sander with 7.5 HP - 1,800 RPM TEFC motor; (2) 11" x 60" cast iron platens; 10" x 172" abrasive belt size, (150) oscillations/Min with 1/2" movement, 0.5 HP oscillation motor.Equipped with: -- (2) 11-1/2" x 62" Cast iron side tables and (1) cast iron end table; tables tilt 30° up & 45° down; 5" vertical table travel w/hand wheel adjustment, 5" lateral side table travel w/hand wheel adjustment, 4-1/2" lateral end table travel w/handwheel adjustment. -- 10" Dia. x 10-1/2" face direct drive pulley, 4-1/2" dia. x 10-1/2" idle pulley. Complete with: -- Magnetic controls with overload protection & dust hood with 4" dia. outlet.

WYSONG & MILES - 315, ...Edge Sander6" x 32" Graphite mocovered wooden platen; double 8" x 34" tilting side tables; full 180° steel end table; tilts and raises & lowers. -- 2 HP Motor; direct drive motor.

WYSONG & MILES - 291, ...Stroke Sander (Manual)5 HP - 1,200 RPM Motor; roller table size: 32" x 84"; horizontal travel stroke: 38"; adjustable height of table base from 26" to 35" via large hand wheel. -- Rubber-faced aluminum pullies, 8-1/2" face x 16" dia.; accepts 6" wide abrasive sanding belts.Pulleys can be spaced to accommodate various belt & material sizes; belt loop travels over table with manual handwheel belt tension & tracking. -- Includes: Magnetic starter, dust hoods

Used YAMAMOTO 30-opening, premium quality, Plywood Hot Press. -- 500 Tons pressing capacity. -- Daylight is 4.7"(120mm). -- Press plates are 54" x 108" x 1.5" (1,370 x 2,700 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- Professional removal and loading available at Buyer's cost.

Used YAMAMOTO 45-opening, premium quality, Plywood Hot Press. -- 500 Tons Pressure Capacity. -- Daylight is 2.75" (70 mm). -- Press Platens are 106" x 53" x 1.57" (2,700 x 1,350 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- This particular press was only operated for about 1-1/2 years. -- Professional removal and loading available at Buyer's cost.

YATES AMERICAN B-26 Top & Bottom Rough Lumber Planer24" x 4" Opening cap., 3/4" to 4" thickness capacity; 46" minimum unbutted length capacity;Specifications: -- (1) 75 HP DMD motor power hoisted top head, (1) 40 HP DMD motor bottom head, 8" dia. cutting circle at 3,450 RPM. -- 40 HP Hydraulic power unit for variable feed rate from 75 to 400 FPM, 12" dia. Urethane tire top feed rolls, 12" dia. non-powered lower rolls. Equipped with: -- Carbide spiral cutterheads, automatic pressure bar release (hydraulically operated), hydraulic top & bottom headlocks, anti-lap bar device, air tensioned & released chipbreaker. -- Complete with: Built-in top & bottom jointers, dust hoods, electrically interlocked safety guards, and small remote operator's console.

ZAFFARONI MLS 130 P PD MULTI-BLADE PANEL SAW: -- SpecificationsZaffaroni is the Top of the Line in Precision Multi Rip saws for Panels. Blade Depth is mechanically adjustable with a tolerance of =- 0.01 mm (0.0004"). The saw is so precise it can also be used for "V" grooving.The Saw blades project through the table from below. A double row of hold down wheels are mounted above the saw, with 24 adjustable rollers to prevent contact with the blade.Technical Characteristics: -- Working Width 1300 mm (51-1/8") -- Min. Panel Length 300 mm (11-7/8"). -- Motorized thickness adjustment from 0 - 70 mm (2-3/4"). -- Adjustable projection of the saw blades from the working from 42 - 62 mm (1- 5/8" - 2-7/16") with circular saw blades or hogger trimmer up to 280 mm diam. (11"). -- Working Table Height 1120 mm (44"). -- Transport Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power 37 KW (50 HP) with Belt Drive. -- Saw Blade Spindle 80 mm x 1310 mm (3-1/8: x 51-1/2"), with double tangs and automatic anti-rotation locking clutch. -- Spindle Speed 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC logic control with digtital communications through bus cable.Spacer Sets: Machines require Spacer Sets and Saw Blades (not included) and pricing is available on request.

ZAFFARONI MLS 160 P MULTI-BLADE PANEL SAW: -- SpecificationsZAFFARONI is the "Top of the Line" in Precision Multi-Rip Saws for Panels. Blade Depth is mechanically adjustable with a tolerance of +/- 0.01 mm (0.0004"). The Saw is so precise it can also be used for V-Grooving.The Saw blades project through the table from below. A double-row of hold-down wheels are mounted above the Saw, with (24) adjustable rollers to prevent contact with the blade.Technical Characteristics: -- Working Width is 1,600 mm (63"). -- Max. panel pass through is 1,780 mm (70"), min. length is (320 mm) 12-5/8". -- Motorized thickness adjustment from 0 - 70 mm (2-3/4"). -- Adjustable projection of the saw blades from the working from 42 - 62 mm (1-5/8" - 2-7/16") with circular saw blades or hogger trimmer up to 280 mm dia. (11"). -- Working table height is 1,120 mm (44"). -- Material Feed Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power is 55 kW (74 HP) with Belt Drive arbor. -- Saw Blade arbor 80 mm dia. x 1,310 mm (3-1/8" x 51-1/2"), with double-tangs and automatic anti-rotation locking clutch. -- Blade Arbor Speed of 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC Logic control with digital communications through bus cable.Spacer Sets: Machine requires Spacer Sets and Saw Blades (not included); pricing is available on request. Examples:width from......1 - 10 mm ...$ 25.45width from.....11 - 25 mm ...$ 30.15width from.....26 - 50 mm ...$ 35.60width from.....51 - 75 mm ...$ 40.15width from.....76 - 100 mm ...$ 45.20width from...101 - 125 mm ...$ 49.75width from...126 - 150 mm ...$ 54.90