WEIMA ZM-30 Quad Shaft 4-Shaft ShredderEquipped with: Model- ZM 30 S -- Unit was used to shred wire (6,000 – 8,000 lbs per hour) --20mm screen included 25 HP x 2 --480V- 3 phase --Cutting chamber is 19"; x 27"; Hopper is 33"; x 48"; --The ZM30S is a beefed up version of the ZM 30. Unit has the same size motors, shafts and cutters as the ZM 50 but with a shorter shaft length

WEIMA C 150 Briquette PressSpecifications & Features: -- Produces 2" (50 mm) dia. Briquettes; -- Hopper opening of 41" x 41" (1,040 x 1,040 mm); hopper volume 1.43 cu/yd (1.1 cbm). Equipped with: -- 9 HP Hydraulic motor; 0.75 HP auger motor; hydraulic oil volume of 26.4 gallons (100 liters). -- Vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material; extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio at 2,600 PSI; hourly output up to 80 - 120 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors").Features: -- Briquette length control, chrome plated clamp, oil level switch, control panel side-mounted to hopper, and overheating protection for hydraulic oil. Solid German engineering. - Freight, start-up, discharge pipes, etc. not included.

WEIMA TH 1500 M Briquette Press (Square Brick) -- Specifications: Produces 5.9" x 2.3" (150 x 60 mm) rectangular briquette; hopper opening of 55" x 55" (1,400 x 1,400 mm); hopper volume of 2.46 cu/yd (1.88 cbm). -- Equipped with: 40 HP Hydraulic motor; 2.6 HP auger motor; 3.0 HP agitator motor; hydraulic oil volume of 264 gallons (1,000 liters). -- Volume reduction from chip/dust to block up at a 10:1 ratio; hourly output up to 800 - 900 Lbs. -- Features: Conical shaped agitator with curved hopper corners, "Bridge Breaker" mounted on agitator; automatic "On/Off" integrated in feeding hopper; hydraulic oil cooling, overheating protection for hydraulic oil. -- Complete with: Touch-Screen control panel on swivel mount; discharge ramp for briquette extraction, chrome plated clamp, and an oil level switch. -- Solid German engineering.

WEIMA TH 814 Briquetter A volume reduction of 90% is possible through the briquetting of wood, paper, aluminum and biomass or synthetics, providing significant savings in labor, disposal and storage costs.Material is hand fed or by dust system into the hopper, where an agitator pulls it into the auger and pressing chamber. Specifications: -- Produces 80 mm (approx. 3.1") dia. compacted logs; approx. 2.4 cu. yd. (55.1 x 55.1 x 37") square vertical hopper, 18 HP motor. -- Hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio; approx. hourly output between 300 - 400 Lbs/Hr.Features: -- Auto on/off integrated into feeding hopper; automatic briquette length adjustment; conical-shaped agitator; dust connection at pressing unit.Options: -- Hydraulic cooling for 24-hour operation, heating for cold weather start-ups; plastic tubing discharge into Gaylord or carousel bagging system. .

WEIMA TH 714 Briquette Press (Cylindrical). -- Produces 2-3/4" (70 mm) dia. x 4" (100 mm) long compacted logs. -- Specifications: Approx. 1.4 m³ vertical hopper, 18 HP (13.5 kW) motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Approx. hourly output between 240 - 280 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors"). -- Equipped with: Centralized control panel for easy operation, MITSUBISHI Logic control & solid German engineering. -- Complete with: Auto on/off switch, auto length adjustment, & oil level sensor. -- Optional:: Hydraulic oil heater, hydraulic oil cooler, transfer piping and customization to customer material handling.

WEIMA TH 514 Briquette Press (Cylindrical). Produces 2" (50 mm) dia. x 4" (100 mm) long compacted logs. -- Specifications: -- Approx. 1.4 m³ vertical hopper, 12 HP (9 kW) motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Approx. hourly output between 80 - 120 Lbs/Hr. ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors"). -- Equipped with: -- Centralized control panel for easy operation, PLC Logic control & solid German engineering. -- Complete with: -- Auto on/off switch, auto length adjustment, & oil level sensor. -- Optional: -- Hydraulic oil heater, hydraulic oil cooler, transfer piping and customization to customer material handling.

WEINIG Powermat 1000 7-Head Feed Trough Moulder(B-R-L-T-T- B-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 40 HP , Bottom 30 HP, and Universal 15 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements.Spindle arrangement: -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM, universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; -- Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement.Feed System: -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter-controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: -- Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- The safety hood, automatic table lubrication pump, and (2) lights inside the reinforced sound enclosure are electromagnetically interlocked, as is the phone modem..

WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays

WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with & Features -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with & Features -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.

WEINIG RONDAMAT 931 Profile grinder Specifications -- 9" Arbor length, 11-1/2" max. tool dia., -- 1.5 HP motor, tilting head assembly for back relief grinding, -- Clearance angle on peripheral of tools 10ø - 30ø and to each side 0ø - 20ø.Equipped with & Features -- Variable feed speed via vari-speed gearbox, -- On-board wheel dressing, -- 9" max. wheel dia.; -- 0.16 HP coolant pump. -- Built in coolant tank. -- Retrofitted with axial constant template holder.

6-Head (B-R-L-T-B-U); working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 10 HP, right 15 HP, left 15 HP, top 25 HP, bottom 20 HP and universal 10 HP motor - all motors with electronic brakes. -- WEINIG Touch-Screen "Power Com" software system features: Profile drawing storage, profile dimensions, tool changes, and production optimization. -- Electronic LED readouts for all tool holder settings, including chip-breakers & pressure elements.Spindle configuration -- Spindle #1: 1-13/16" With cutter-head speed of 8,000 RPM; Power-Lock tool holders: #2 - #5 With cutter-head speed of 12,000 RPM and tool holder #6: variable speed 4,000 - 12,000 RPM. Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment of top head; top head with independent adjustment of chip-breaker & pressure element. -- Variable feed speed from 20 - 120 FPM, 10 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with: Adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. Equipped with: -- Chromed tables & fences, (2) powered table rollers in bed, (1) between bottom and universal spindles, and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2'). -- Central location of lubrication points, electromagnetic interlocking of safety hood, manual table lubrication pump, and (2) lights inside reinforced sound enclosure and phone modem.

WEINIG UNIMAT 23 ATS, 6 HEAD MOULDER6-Head (B-R-L-T-T-B), working capacity 9-1/16" x 6" profiling. -- Head sequence: Bottom 10 HP, right & left by 15 HP, top 20 HP, top 15 HP and bottom 15 HP motor; Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- WEINIG ATS (Automatic Tool Setting), Storage for up to (99) profiles; automatic positioning (radially) of left and top spindles (linked). -- Mechanical digital readouts on all other spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, Receding chip breakers on left and top heads. -- Feed motor 7.5 HP, variable speed 18 - 118 FPM, overhead feed wheels with pneumatic pressure, (2) powered rollers in machine table. -- Large tool cutting circles, table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Infeed straightening table 2 M (6'6") with adjustable fence & adjustable outfeed table. Side pressure roller mounted to infeed table. -- Includes: Central lubrication, full sound/safety enclosure, manual bed lubrication pump.

WEINIG PROFIMAT 23 Feed Through Moulder5-Head (B-R-L-T-B) Moulder with working cap. 9-1/16" x 4-11/16". -- Spindle sequence: Bottom 10 HP, right & left by 10 HP motor, top 15 HP, bottom 10 HP motor. -- Spindle diameter 1-1/2" with cutterhead speed of 6,000 RPM. All spindles equipped with mechanical digital readouts. Digi-set readouts on left and top spindles. Chipbreaker and pressure for left and top spindles with digital readouts. -- Feed: 4 HP Carden feed drive (chainless feed system), variable feed speed 18 - 78 FPM; (1) driven outfeed roller in bed. -- Equipped with: Infeed straightening table: 2 M (6-1/2') central lubrication system, central lubrication and full sound and safety enclosure. -- Extras: Includes manuals, used cutter-heads, many sets of assorted Knifes, and dust collection manifold. -- Machine is set up for 460V and it comes with a 230 V to 460 V step-up transformer -- Low hours, used for production of cabinet door rail and stiles components.

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with & Features: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity).Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump. Includes: -- 1-13/16" arbor

WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity).Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump. -- Includes: Manuals and 1-13/16" arbor and also has a 2-1/8 arbor